MXR M196 User manual

92503010850revB

M196 A/B BOX

M196 A/B BOX

DESCRIPTION

• Routes instrument signal to two
separate output paths

• Select between two separate
signal paths or run both at the
same time

• Thru jack allows you to connect
to a tuner or amp that receives a
constant signal from your guitar,
unaected by the A/B switches

• Output jacks are terminated to
ground in bypass

• All switching is true hardwire

CONTROLS

INPUT receives

instrument signal

THRU to tuner or sends

constant signal to an amp

OUTPUT A sends instrument

signal to Amp A

OUTPUT B sends instrument

signal to Amp B

FOOTSWITCH A activates

OUTPUT A

FOOTSWITCH B activates

OUTPUT B

POWER

The MXR A/B BOX is powered
by one 9 volt battery (remove
bottom plate to install), a 9 volt
AC Adapter such as the Dunlop
ECB003/ECB003EU or a power
supply such as the DC Brick

™

.

DIRECTIONS

• Run a cable from your instrument
to the A/B Box’s Input jack.

• OPTIONAL: If you want to
connect a tuner or have an amp
receive a constant signal from
your instrument, run a cable to
the A/B Box’s Thru jack.

• Run a cable from Amp A to
the A/B Box’s Output A jack,
and another from Amp B to
the Output B jack.

• When both footswitches are
depressed, both signal paths
are active.

SPECIFICATIONS

Switching True hardwire
Current Draw 1.4 mA
Power Supply DC 9 volts

DUNLOP MANUFACTURING, INC.

P.O. BOX 846 BENICIA, CA 94510 U.S.A.

TEL: [phone] FAX: [phone]