MXR M108S User manual

92503020568REVB

M108S TEN BAND GRAPHIC EQ

M108STEN BAND EQ

The MXR Ten Band Graphic EQ gives players
huge amounts of tone shaping and level control
in a bullet-proof enclosure. This pedal has
been upgraded with noise-reduction circuitry,
true bypass switching, a lightweight aluminum
housing, and a second output so you can run two
separate signal chains. With ten carefully chosen
frequencies and both input and output level
controls, the Ten Band EQ will let you tune your
bass or guitar rig to any room in seconds.

CONTROLS

1 VOLUME slider controls

overall effect volume

2 EQ sliders boost or attenuate

up to ±18dB at six different
frequency centers

3 GAIN slider controls amount

of gain boost

4 OUTPUT jacks

5 FOOTSWITCH toggles effect

on/bypass ( blue slider LEDs
indicate on)

1 32

+12

+6

0

-6

-12

INPOWEROUT 2OUT 1

+12

+6

0

-6

-12

+12

+6

-6

-12

4

DIRECTIONS

• Run a cable from your guitar to
the M108S’s INPUT jack and run
another cable from the M108S’s
OUTPUT 1 jack to your amplifier.
Optional: Connect a separate

POWER

The Ten Band EQ is powered by
an 18-volt AC adapter such as the
included Dunlop ECB004 or
the DC Brick™ and Iso-Brick™

power supplies.
signal chain from the OUTPUT 2
jack to a second amplifier.

• Set all sliders to their 0dB
position and depress the
footswitch to turn the pedal on.

• Move the VOLUME slider up to
increase overall effect volume or
down to decrease it.

• Move the GAIN slider up to
increase gain or down to
decrease it.

• Move PARAGRAPHIC sliders
up to boost or down to cut

GAIN16K8K4K2K1K50025012562.531.25VOL

0

associated frequency by up
to ±12dB.

SPECIFICATIONS

Input Impedance 470 kΩ

Output Impedance 5 kΩ

Max Input Level
All Sliders at 0 dB

Max Output Level
All Sliders at 0 dB

Frequency
Response

+14 dBV
at 1 kHz

+14 dBV
at 1 kHz

±1 dB, 20 Hz

to 20 kHz

Noise Floor* -101. 4 dBv

Filtering ±12db at:

31.25, 62.5, 125,

±12dB she lf

at 16 kHz
50, 500, 1k, 2k,
4k, 8kHz

Bypass True Hardwire

Power Supply 18 Volts DC

Current Draw 48 mA

*A-weighted at 5. 2Vrms

DUNLOP MANUFACTURING, INC.

P.O. BOX 846 BEN ICIA , CA 94510 U. S.A .

TEL : [phone] FA X: 1-70 7-745-2 658