™
Raw Dawg Overdrive
EG74
This pedal gives Eric Gales all the seasoning he needs
to serve up some of the tastiest licks in the business.
It’s a classic crunchy OD circuit customized for a more
balanced midrange and a bump in gain, providing a
sweet, organic sound—even when it’s time to crank
up the heat.
jimdunlop.com/eg74
External Controls
2
1
3
4
1 OUTPUT knob controls overall effect volume
2 TONE knob controls overall EQ
3 DRIVE knob controls overdrive intensity
4 KICKSWITCH toggles effect on/bypass (blue LED indicates on)
EG74 | Raw Dawg™ Overdrive 2
Basic Operation
Power Directions
The Raw Dawg™ Overdrive is powered by the
Dunlop ECB003 9-volt adapter or the DC Brick™,
Iso-Brick™, and Mini Iso-Brick™ power supplies.
This pedal cannot be powered by a battery.
1. Run an instrument cable from your guitar to the EG74’s
INPUT jack and another instrument cable from the EG74’s
OUTPUT jack into your amplifier’s input.
2. Start with all knobs set to 12 o’clock.
3. Turn the effect on by depressing the footswitch.
4. Rotate OUTPUT knob clockwise to increase overall
volume of effect or counterclockwise to decrease it.
5. Rotate TONE knob clockwise for a brighter sound or
counterclockwise for a warmer sound.
6. Rotate DRIVE knob clockwise to increase amount
overdrive or counterclockwise to decrease it.
EG74 | Raw Dawg™ Overdrive 3
Specifications
Input Impedance
Output Impedance
Noise Floor* < -100 dBV
Gain 21 to 47 dB
Bypass True Hardwire
Current Draw 6 mA
Power Requirements 9 VDC
Measurements made at 1 kHz
*All controls at mid-position, A-weighted
> 450 kΩ
< 100 Ω
EG74 | Raw Dawg™ Overdrive 4
Loading...