MXN MXN-7DMQ Owner's Manual
7” Quad Digital LCD monitor
for all around vision
Design and Specifications are subject to change without notice.
OWNER’S MANUAL
Model : MXN-7DMQ
MXN-7DMQ
CAM1 CAM2
CAM3 CAM4
Model : MXN-7DMQ
Safety Instructions
Package Contents
Operation
System Setting
Camera setting
Trigger setting
Split setting
Auto Scan setting
Day/Night setting
Advanced menu
Installation
Connection
Specifications
.......... 03
.......... 04
.......... 05
.... 07~14
.......... 07
.......... 08
.......... 10
.......... 12
.......... 12
.......... 13
.......... 15
.......... 16
.......... 17
INDEX
MXN-7DMQ
CAM1 CAM2
CAM3 CAM4
Safety Instructions
- 3 -
WARNING
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Use only DC 10V~DC 32V.
In case that dust or liquid was soaked into the housing, please turn off power and consult an
experienced technician before using.
Do not install the unit in an extremely hot or humid place(radiator, air duct, etc.) or in a place
subject to direct sunlight, excessive dust, mechanical vibration or shock
If your vehicle has been parked in direct sun light resulting in a considerable rise in temperature
inside the vehicle, allow the unit to cool off before operating
Clean the unit with a slightly damp soft cloth
Use a mild household cleaner
Never use strong solvents such as thinner or benzine as they might damage the
finish of the unit.
This symbol is intended to alert
the user to the presence of
uninsulated "dangerous voltage"
within the product's enclosure
that may be of sufficient magnitude to constitute risk of electric
shock to persons.
This symbol is intended to alert
the user to the presence of important operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.
To avoid electric shock, do not open the cabinet. Refer servicing to qualified personnel only.
Package Contents
- 4 -
MONITOR CAMERA INPUT CABLE
(RAIL TYPE)
FIXING BRACKET USERS MANUAL
SUN VISOR SCREW KIT
7” Quad Digital LCD monitor
for all around vision
Design and Specifications are subject to change without notice.
MXN-7DMQ
CAM1 CAM2
CAM3 CAM4
OWNER’S MANUAL
Model : MXN-7DMQ
MXN-7DMQ
Operation
- 5 -
POWER
SELECT
MENU
UP
DOWN
DAY/NIGHT SENSOR
DAY/NIGHT SENSOR (Photo T.R)6
Automatic Brightness Control
The brightness of the monitor is adjusted automatically
by the Photo T.R accordingly to the circumstance.
Touch icon to select CAMERA.
Touch icon to select the option in SET UP MENU.
* NOTE - Monitor start mode will follow “AUTO POWER ” setting.
POWER1
SELECT2
MENU3
Touch icon to turn the monitor on.
Touch icon to turn the monitor off.
Touch icon to enter Display Menu(Short key) and
Main Menu(Long key).
Touch once to enter menu mode.
Touch again to exit from menu mode.
Selectable OSD Menu Disappears within 10 sec if there`s
no new button (icon) pressed.
Touch menu button over 2 sec to go back to main menu
from display menu.
UP DOWN4 5
While in Menu mode and navigate through the available
menu options.
Touch to adjust Bright, Contrast, Color, Sharpness,
Tint Volume and other setting values.
Operation
- 6 -
DISPLAY MENU
Shortkey Menu can control Bright, Contrast, Color , Sharpness and Tint.
How to adjust : Select camera and press the “Menu” icon with short time.
Now you can adjust.
MENU UP/DN SELECT UP/DN MENU
Short Key
(more than Touch 1 sec)
* "TINT" menu is displayed in NTSC only.
NTSC MODE
MENU MENU
DISPLAY
MENU
: [ 30 ]CONTRAST
: [ 30 ]COLOR
: [ 30 ]TINT
: [ 30 ]SHARPNESS
BRIGHT : [ 30 ]
Loading...