MXL BCD-1 User Manual

BCD-1

1910 East Maple Ave. El Segundo, CA 90245

Phone: [phone] Fax: [phone]

Broadcast Dynamic Microphone

ank you for purchasing the MXL BCD-1 Broadcast Dynamic Microphone. With proper care this microphone will provide many
years of satisfaction. For best results please take a few moments to review this literature.

Marshall Electronics, Inc.

E-mail: [e-mail]

Internet: www.MXLmics.com

General Characteristics

is microphone is a cardoid pattern dynamic microphone, primarily designed for broadcast use, but it can be used equally eectively
to record ham radio and musical applications. e term “cardioid response” means that the microphone is most sensitive to sound
arriving from the front, and less sensitive to sound from the side and rear. e rugged metal construction and integrated steel mesh
grill ensure that the BCD-1 will perform consistently in nearly all environments. e microphone features an adjustable mounting
bracket ready to attach to any industry standard microphone stand and boom arm. e BCD-1 includes a standard 3-pin male XLR
type connector, which can be connected to the rest of your equipment using a standard XLR microphone cable.

Microphone Cables

e microphone cable can have a profound eect on the sound of any microphone. Even the nest microphones will sound poor if the
interconnect cable allows noise to enter or causes distortion or loss of information. We recommend the use of Mogami Brand cables.

Care

Dust and foreign materials can degrade the performance of a microphone over time. Store the microphone in a warm dry place when
not in use. To remove ngerprints and marks from the microphone wipe with a clean, soft dry cloth.

MXL BCD-1 Specications

Type: Dynamic
Frequency Range: 40 Hz-15 kHz
Polar Pattern: Cardioid
Sensitivity: -54dB re 1 V/Pa
Impedance: 600 ohms
Size: 157.5mm x 50.8mm/6.2 in. x 2.0 in
Weight: 1.25 lbs/567g
Metal Finish: Black

Frequency Chart

Polar Pattern

0

90270

180

Warranty

Marshall microphones are guaranteed against defects in material and workmanship for three years from date of purchase. Should you
encounter any problem with this unit, promptly contact the company you purchased it from for assistance. e original dated sales
receipt will be necessary for any warranty claim. Do not send any unit directly to us without prior authorization from our service
department! Warranty coverage is limited to repair or replacement (at our option) of the microphone, and does not cover incidental
damages due to use of this unit, nor damage caused by accidental misuse of this product.