MWf MF-1100 A User Manual
MF 1100 A
USER
MANUAL
+90 ( 212 ) 222 0946
+90 ( 212 ) 222 0947
info@mwf.com.tr
Phone :
Fax :
Email :
www.mwf.com.tr
Website :
Contents
User’s Maual
ماﺪﺨﺘﺳﻻا ﻞﻴﻟد ةءاﺮﻗ
. ﺚﺤﺒﻟا أﺪﺑ ﻞﺒﻗ ﺪﻴﺟ
Page
1
Contents
Overview
Important Notes
Main Unit
Parts
Assembly
Setup
Getting Started
1
2
3
5
7
8
9
12
Conrm Target
18
Metal and Water Finder
Important Notes
User’s Manual
Read & Understand
The User's manual
before using this device
The operating in high voltage areas would
limit the results and performance
Don't operate two devices with same
method of search at the same place
The operator Must remove any metals
that might affect the opreatin
eg:Rings,watch, belt....
Any attempt to tamper the device or
unapproved maintenance would void
the warranty
For best power endurance and reliability.
use heavy duty and high quality batteries
The user must practice before starting the detecting operations and
discoveries
Store in Cool and dry place 15-40 C 5%-75% humidity
Don't store in high temperature or high
humidity
The cell signal interferes with the device
signal, so turn off the cell while operating
Disconnect the batteries before long
time storage
Page
2
MF 1100 A
This Metal-Finder electronic device works on the transceiver technology,It sends waves and
receives them simultaneously,It detects metals by sensing their frequencies,Every Metal has its
unique frequency ,depending on its physical structure and chemical reaction, when the metals are
underground they will be affected by the earth's electromagnetic fields, these metals are affected
by the soil electrostatic fields that absorbed from different sources like power stations,radio and tv
transmitting stations, satellites, lightning and so others electrostatic and power generators.
This device detects metals and underground targets by affecting their electrostatic fields with the
transmitted waves from the device itself these waves act as an amplifier to the field and make them
float to the surface which facilitate the detection process for long ranges,the device receives the
amplified signal and locates the target directly and precisely
Page
3
Soil
Target
Overview
After great experiments we've reached to the concept of controlling the wave length and width
besides the transmitted frequencies from the device to the ground , Therefore the user could
select the specified search distance and depth easily and precisely up to 90 %.
This technology works for the first time now with MWF Products .
Search Operation: Search for Gold, Metals , Treasures, and Voids
Search System: Receiving the Electrostatic Fields of the Buried Target
Operating Processor: Microcontroller
Processor Frequency: 20.000 MHz
Processing Type: Digital Signal Processing ( DSP )
Operating Frequency: 1-30 KHz
Search Depth Program: 20m with depth control function
Searc Distance Program: 1500m Radius with Level Control Function
Power Consumption 120mA
Battery Endurance: 4 hours
Output Power: 12v Which allows fast and accurate scans
Display: 128x64 Graphical LCD Display
Overview
MF 1100 A
Page
4
A notification appears on the display when the primary battery is low
when the secondary battery is low the switch led goes off
Battery Note
Main Unit
MF 1100 A
1
4
5
6
3
2
Front View
Page
5
Scanning Antennas plugs
1
Display
2
Power Switch
3
Navigation And selecting Button (Move)
4
Confirm And Enter (Enter)
5
Escape And Restart Button ( ESC )
6
Main Unit
MF 1100 A
8
9
10
7
Back View
Page
6
Primary Battery Cover
7
Grip Socket
8
Secondary Battery Cover
9
Secondary Battery Power Switch
10
Loading...