MWf Gold Radar User Manual
Metal and Water Finder
User’s Manual
Gold Radar User’s manual
WWW.MWF-USA.COM
Contents
Metal and Water Finder
Contents
Safety information
Technical specification
Device parts
Interfaces and components of Device
Overview
Assembly
Setup wizard
Start searching
Notes
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
1
2
3
5
7
8
10
11
13
17
1
Safety information
The operating in high voltage areas
would limit the results and
performance
Don't operate two devices with
same method of search at the
same place
Disconnect the batteries before
long time storage
Any attempt to tamper the device
or unapproved maintenance
would void the warranty
It’s better to turn off mobile while
using the device.
Don't store in high temperature or
high humidity
The operator Must remove any
metals that might affect the
opreatin eg:Rings,watch, belt....
For best power endurance and
reliability. use heavy duty and high
quality batteries thats for the devices
which work on removable batteries
The user must practice before starting the detecting operations and
discoveries
Store in Cool and dry place 15-40 C 5%-75% humidity
Read & Understand
The User's manual
before using this device
2
Page
Technical specification
Search system : Built-in ionic and radar search system
Search principle:
Operating processor: MICROCONTLLER PIC18 & ARM 7
Operating frequency: 50 MHz
Power:
Power consumption: Maximum of consumption 350 MA
Battery life: 8 work hours
Charger: 5.1 volt 3 amp / Charging Time 3 hours
Display Type: TFT Color Monitor 4.3 ” , 65536 Color, 48Mhz , CDMA GPU
Specialized to detects: Gold
Targets Discrimination: Yes, detects gold only
Target Selection System: none
Depth Search: 50 M
Distance Search: 100 M
Results feedback:
Bluetooth none
Processing the Signal Received level of ionic radiation
7.4v 3000 mAh/ output 12v
Indicators of graphical radar data, acoustic, oscilloscope and
signal strength, and vibration alerts.
Wireless: none
Page
3
Technical specification
Automatic smart
guidance system:
Voice alerts:
Vibrating alert:
Operating temperature:
Storage temperature:
Humidity:
Weight:
Dimensions:
Bag dimensions:
Yes , by graphical interface to locate the path and direction of
the target, and Acoustic commands.
Yes
Yes
From -15° C to 60° C
From -15° C to 40° C
It can be stored and work in the degree rate of air humidity of
level 90%.
Compound: 1 kg – disjointed in the bag: 3 kg
19X13X19.5 cm
40.5x35x21 cm
Page
4
Device parts
Main Control Unit
The unit is responsible to control of the settings and search
options.
The batteries was built inside it.
Also it’s responsible to issuing the search acoustic , optical and
vibrations results.
Ion and Radar sensor.
This sensor needs to connect into its own entrance at the
front of the device by using connectivity socket.
Charger
An electric charger to recharge the device's battery
Values: Input: 240-100VAC / 60-50Hz / 0.4 amps
Output: 5 volts AC / 3 amp / 15 Watt.
Headphones
Needs to contact through the headphones jack, who is to the right
side of the device.
Page
5
Interfaces
1
2
3
5
Socket to connect the Sensor
1
ON/OFF key
2
View screen
3
4
Socket of the charger
4
5
Socket of the headphones
Page
6
Overview
Connect the radar sensor through
the socket who is at the front of the
main unit of the device.
When you disconnect the radar
sensor from the main unit please
make sure you are pressuring on the
empowerment Key as shown in the
picture.
1
2
1
2
Page
7
Loading...