MV Sports M14402 Instruction manual

PLEASE READ BEFORE ASSEMBLY.
IF YOU NEED HELP WITH THIS PRODUCT PLEASE CONTACT CUSTOMER SERVICES.

This scooter is to be assembled by an adult.
Please remove all packaging before giving to a child.
WARNING: Read the information supplied by the manufacturer.

STUNTED® Strike Scooter

FRAME ASSEMBLY

1. Loosen the clamp and slide the handlebar stem
over the fork column until it touches the lock nut

2. Ensure that the handlebars are aligned with the
front wheel and that the wheel is facing forwards
(note the arrow on the front fork)

3. For a 5 bolt clamp follow this process:
Using the Hex key do a quarter turn to tighten Bolt 1
then Bolt 5 then Bolt 3 then Bolt 4 then Bolt 2, repeat
pattern untill all Bolts cannot be tightened any further.

Handlebar

assembly

Bolt 1

Bolt 2

Bolt 3

Bolt 4

Bolt 5

PLEASE REFER TO CLAMP & BOLT ASSEMBLY
DIAGRAM FOR BOLT ORDER.

SAFETY ADVICE:

This is a two wheeled self propelled scooter designed for a single
rider only. It should never be ridden by more than one person at a
time.
It is not intended for road use or for use with any motorised device.
Use only on smooth, clean and dry surfaces away from other road
users and pedestrians. Braking action and wheel traction will be
reduced in wet weather conditions.
Never leave the scooter unattended.
Please add oil to the bearings periodically for lubrication, using a
few drops of light machine oil.
After extensive use the wheels and bearings may become worn
and could need replacing. Spare parts are available from MV
Sports. Please contact customer services below for details.
A charge may apply for some items.
Clean the scooter after use. Regular maintenance will enhance the
safety.
Do not modify the scooter in any way not outlined in these
instructions.
Replace worn or broken parts immediately.
Fixings can become lose over time so please check and tighten
periodically.

FOR YOUR CHILDS SAFETY:

Recheck that all screws, nuts and bolts are firmly tightened.
make sure that your child is capable of riding this scooter.
Age or weight does not automatically indicate that a child is able to
use this scooter safely.
Do not allow your child to ride unsupervised.

SCOPE AND LIMITED WARRANTY

This warranty does not cover damage or
loss from accidents, normal wear, improper
assembly or adjustment, jumping, stunt
riding, racing or competition, abuse, neglect
or when used with any motorised device.

Design and specification may vary.
Please retain this leaflet for reference to the
Carefully made in China to European Safety Standards.

CONFORMS TO EN14619 (Class A)

35 Tameside Drive • Castle Bromwich • Birmingham

DISTRIBUTED BY

MV SPORTS & LEISURE LTD

B35 7AG • UK

MV CUSTOMER SERVICES

We make every effort to ensure th at this product reaches you in

satisfact ory condition . However if you have any queries, need

assistance, or this product defective, please contact our

Customer Helpline: cust omer.services@mvsport s.com.

Alternati vely, you can call on 0870 8404255.

WARNING: Failure to tighten the clamp fully will result in the handlebars not being secure

and the scooter will be unsafe to ride.
Overly tightening one bolt before the other will make it impossible to tighten the clamp fully.

ASSEMBLED SCOOTER

Please check all screws and fittings are secure
before giving to a child.

Ensure all locking devices are engaged.
Ensure there are no broken components.

Replacement parts are available by contacting
MV Customer Service Helpline.

The item shall be used with caution as it requires
great skill, so as to avoid falls or collisions which can cause injury
to the user and third parties.

WARNINGS:

Protective equipment should be worn. MV recommends the
use of a helmet and protective elbow, wrist, shin and knee pads
when using this product.

User’s maximum weight 100kg (Class A).

Not suitable for children under 3 years.
Small part. Choking hazard.

The braking mechanism to reduce speed will get hot from
continuous use, do not touch after braking.

Keep fingers away from moving parts to avoid pinching
and entrapment.

NOTE: ILLUSTRATIONS MAY DIFFER TO ACTUAL SCOOTER SHAPE

ORDER

1st
5th
3rd
4th

2nd

BOLTTIGHTENING

5 Bolt Clamp

Bolt 1
Bolt 2
Bolt 3
Bolt 4
Bolt 5

Clamp

Head tube

Ensure arrow is

facing forward

TOOLS
REQUIRED

(Supplied)

Hex key x2

CONTENTS

1. Main frame

2. Handlebar assembly

3. Stunt Peg (x2)

4. Screw and Peg Axle (x2)

(long rear axle, short front axle)

Brake

1

STUNT PEG REAR WHEEL ASSEMBLY

1. Using the hex keys release the wheel and remove the axle.

2. Push the long peg axle provided into the peg and through the
wheel ensuring spacers are in place as illustrated. Tighten the
nut using the spanner provided until securely attached.
NOTE: Use allen key provided to align inner wheel spacer.

Ensure spacers are centered between bearings. (See figure A).

3. Follow the same method to attach the front peg. (No outer
spacers required)

4. Stunt pegs can be attached to either the right or left hand
side of the scooter as required.

NOTE: Front stunt peg comes already assembled.

USE:

Hold both handgrips firmly.

Put one foot towards the front of the deck.

With other foot, push off the ground to propell
the scooter forward.

Both feet can fit on the deck when desired
speed has been reached.

To stop, step on the brake with the rear foot.

NOTE: ILLUSTRATIONS MAY DIFFER TO ACTUAL SCOOTER SHAPE

Rear Wheel

Screw

Spacer

10.2016 - ISSUE 1

3

Deck

Outer

PRODUCT NO. M14402

Grips

4

2

Stem

Clamp

Bearing

Down Tube

Rear Axle View

Fork Column

Handlebar

Lock Nut

Head Tube

Front Fork

A

Wheel

Footbrake

Inner wheel

spacer

Stunt Peg

Peg Axle

WARNING: Failure to tighten the nut

Deck/Frame

securely will result in both the peg and wheel
not being secure and the scooter will be unsafe
to ride. Fixings can become loose over time so
please check and tighten periodically.

A GUIDE TO SAFE SCOOTERING

1. We recommend this scooter is for pavement use only.
It is dangerous to ride on public highway.

2. Do not ride at night and in the dark.
Visibility is often limited at dawn and dusk.

3. Always give pedestrians right-of-way, and don’t ride too close to them.

Never park your scooter where it can cause a nuisance.

4. Avoid hazards that may cause you to lose control of your scooter such
as pot holes, uneven pavements and manhole covers.

5. Leave plenty of room when passing parked vehicles and watch out for
doors being opened in your path.

6. Remember that braking distance should be increased in wet weather,
and regular checks of brakes, steering and lighting should be made.

7. Never carry passengers on your or scooter. Never carry packages in

your hands while riding, or anything to your scooter that could obstruct your

visibility or control.

8. Don’t wear anything that restricts your hearing.

9. Always ride with both hands on the handlebars.

10. Don’t wear very loose clothing, which could hang down and become

caught in the wheels. Wear cuff bands or trouser clips to keep your trousers from

getting caught in the wheel.

11. We recommend that light-coloured or rescent clothing be worn which

helps others to see you in daylight and poor light.

12. Always wear proper safety equipment. We recommend a helmet,
long-sleeved shirt, long trousers, shoes, elbow, wrist, shin and knee pads.
Gloves and eye protection also make good sense. Cover your

handlebars, stem and top tube with safety pads for extra protection.

Please refer to the Highway Code

regarding rules for cyclists