Y
USER MANUAL
E
G
A
MV SPA
MV
SPA
- 1 / 22 -
Contents
Y
MV SPA
Before
Use
To Use
To
Clean
Trouble
Shootin
g
Safety Precautions --- 2 ~ 7
Parts & Functions ------ 8-9
To Connect Hoses ------ 10
To Use ------- 11
Precaution for Use ----- 12
To Clean ---- 14
Checks before calling customer
services
-----15 ~ 16
E
G
A
Please read this User’s Manual
for correct use
Referen
ce
Product Specifications ----- 17
After-sales services ---- 19
Product Warranty ---- 20 ~ 21
- 2 / 22 -
MV
SPA
Safety Precautions
‘Safety Precautions’ should be carefully observed to prevent potential accidents and risks.
Precautions consist of the following “Warning” and “Caution” messages.
Precautions consist of the following “Warning” and “Caution” messages
Y
Warning
Caution
!
This symbol indicates a potential risk. To prevent such risk,
You MUST avoid an action which is marked with this symbol.
please observe the instructions.
Please READ these instructions
carefully before use..
Warning
Do not immerse the Product in water.
If accidentally immersed in water,
unplug the power plug from the main
outlet and contact the nearest retailer
or the Service Center.
Take care not to trap the power cable
in doors or other objects.
Do not use the Product if
any abnormality is shown
on the Product.
Unplug the power plug from the
main outlet and contact the
nearest retailer or the Service
Center
Clean the pins of the plug with
a dry cloth if contaminated by
water or dust.
E
G
A
This may damage the power
cable leading to fire or electric
shock
Otherwise this may cause fire or
electric shock.
- 3 / 22 -
MV
SPA
Do not touch or remove the
power plug with wet hands.
Do not cover the Product
with during use.
Y
This may cause electric shock.
Do not use many plugs on
one socket.
If the socket is overheated, it may
cause short-circuiting or electric
shock.
Do not place heavy objects
on the power cable.
This may damage the power cable
leading to fire or electric shock.
This may cause product breakdown.
Do not connect the plug
upwards on the socket.
This may cause fire or electric shock.
Do not staple down the power cable to
affix to surfaces.
This may cause electric shock.
E
G
A
Always plug into a suitable socket
(AC 220V).
This may cause fire or
electric shock.
.
Do not damage the power
cable by extending or
altering.
This may cause fire or electric shock.
- 4 / 22 -
MV
SPA
Remove the power plug from the
socket when cleaning
or checking.
Do not damage the power cable
by extending or altering.
This may cause fire or electric shock.
Y
This may cause electric shock
Caution
Do not exert heavy impact
On or drop the Product.
This may cause breakdown and
Safety problems.
Do not mount or sit on
the Product.
Care must be taken with children
in particular.
Do not place the Product on
uneven surfaces
Take care that the Product does
not fall. This may cause breakdown.
Do not install the Product
Where it becomes vulnerable
to excessive water exposure
or deposits.
This may cause short circuiting
or electric shock.
E
G
A
MV
- 5 / 22 -
SPA
Do not use loose power
cables, plugs
or sockets.
This may cause fire or electric shock
Do not pull on the cable
to remove the plug.
This may cause fire or
electric shock
Y
E
Do not use the Product whilst leaving the
nozzle head of the water inlet outside water
for a long time.
It may cause breakdown.
Nozzle head of the water inlet
↑IN↑.
- 6 / 22 -
Nozzle head of the
water inlet
↑IN↑.
G
A
MV
SPA
Do not use household detergents
to clean the Product or harsh
abrasive chemicals or sponges.
This may damage the Main Body.
Earth the power plug
If plugged into a socket that has an
earth connection, no extra earthing
is necessary.
Y
Earth
Connection
E
Do not place heavy or
unsteady objects on
top of the Product.
This may damage the Main Body or
cause a malfunctioning in the switches.
Always clean the filters and
parts on the Water Inlet
And Outlet after use.
This may reduce the amount
of bubbles and breakdown..
This Product is for household use only.
Other use may cause breakdown.
When carrying, support the Product by
holding the lower part
of the Main Body.
This may cause scratches or
breakdown.
Do not insert the filter parts or
nozzle hoses in excessively
hot water.
This may cause deformation on the
filter parts or nozzle hoses.
Do not use any bath products
(shower gel, bath gel,
Bubble Spa etc)
This may cause blockage on the filter,
or no bubbling at al.
No more 50℃
G
A
MV
- 7 / 22 -
SPA
Parts & Functions
Control Panel
Water
IN,OUT
To be connected to
the Inlet on the Main Body
PE Cap
Remove the PE Cap when connecting
the hoses.
the remaining water will come out
when the PE Cap is removed.
Mail BODY
To be connected to the
Outlet on the Main Body
Adapter
Detail Control Panel
Rubber Pad
20 Min.
Power
Switch
Y
E
G
A
Inlet
Hose
Outlet
Hose
A small amount of water remains
inside the product for test purposes.
MV
SPA
- 8 / 22 -
Inlet Hose (IN)
Y
Outlet Hose (OUT)
Inlet Nozzle Head
Outlet Nozzle
Head
Filter Packing
Plate
헤드 커버
Head Cover
Middle Cap
(Use a coin to turn the Middle Cap to tighten or loosen.)
Plastic
Screen
Head Cover
E
G
A
- 9 / 22 -
MV
SPA
To Connect Hoses
1
2
3
Remove the PE Caps on the Inlet and
Outlet on the Main Body.
When the PE Cap is removed a small amount of
water retained inside the Product will come out
for test purposes.
Hold the Hose and slide down the Sleeve.
Please check that the correct Hoses for IN and OUT
are connected to the corresponding Sleeve
Connect the Hoses to the corresponding
Inlet and Outlet on the Main Body.
Y
PE CAP
E
Sleeve
G
A
Inlet
Push in the Hose while pulling down the Sleeve.
Once connected, release the Sleeve to secure the connection.
- 10 / 22 -
Outlet
MV
SPA
To Use
For General Bubble Spa
Adjust the water temperature slightly lower than normal bath water.
Remove all facial make-up before taking a bath.
White bubbles will spout out.
Foreign materials will float on the surface at Auto Stop.
Please remove the foreign materials by letting the water overflow.
If you have a long bath, follow the steps 1 to 7 on the right hand side
instead of operating the Product at first instance.
Keep a distance of at least 50cm from the Inlet Nozzle Head
to the Outlet Nozzle Head.
To discharge water from the tank when you turn off the Power
button, or after the Auto Stop, the small air pump will operate for
3 minutes. If the water is not completely emptied from the tank,
bubbles will not spout out in following usage.
1. Immerse the Inlet/Outlet Nozzle
Heads inside the bath tub.
2. Touch on the Power Button (ON).
3. Take a shower.
4. Soak your body in the bath tub.
5. The Product will automatically
stop in 20 minutes.
6. Come out of the bath tub.
Y
E
G
A
When air intake is insufficient, bubbles may temporarily
become thinner during use.
7. Rinse.
Expose the Inlet Nozzle Head
to the air outside of the water to idle.
- 11 / 22 -
MV
SPA
For Bubble Shower
Y
To have a brief shower using the bubbles
1. Immerge the Inlet Nozzle Head into the
washing basin or bath tub and run the water.
2. Turn on the Product.
3.
Bubbles will spout out from the Outlet
Nozzle Head.
4. Adjust the quantity of water.
5. Hold the Outlet Nozzle Head to wash hair or have a bubble shower.
E
G
A
- 12 / 22 -
MV
SPA
Precautions for Use
For proper and best use of the Product, please observe the following.
Y
To disassemble the Nozzle Head
for cleaning
Hold the Nozzle Head and
the Head Cover and
bend down to open.
Do not operate the
Product whilst leaving
the Inlet Nozzle Head
outside of water.
Floating matter during bathing
All parts in the correct order
Each part of the Inlet and
Outlet Nozzle Heads must
be assembled in the correct
order. (see Page 9)
Care of the Nozzle Head
Take care not to block the Inl
et and Outlet Nozzle Heads.
Distance between the Inlet and the
Outlet Nozzle Heads
E
G
A
Allow the water to overflow
in order to remove
floating matter.
Keep a distance of at least
50cm between the Inlet
and Outlet Nozzle Heads.
MV
SPA
- 13 / 22 -
To Clean
To clean each part of the
Nozzle Head
1. To Clean the Inlet Nozzle Head
Use a tooth brush or a soft brush to
clean the stainless steel filter. (prior to use)
2. To Clean the Outlet Nozzle Head
Separate the parts of the Outlet Nozzle Head and use a
tooth brush or a soft brush to clean each part.
Assemble the parts in the correct order after cleaning. (see Page 9)
To Clean the Main Body
To avoid damage or scratching, observe the following
Clean the Product with a soft wet cloth for general cleaning.
Use a small amount of neutral detergent to clean. Use a wet cloth
to clean off.
SUS Screen
SUS 망사
Y
E
G
A
Warning
Caution
Remove the power plug from the power socket before cleaning.
Do not clean the Product with harsh bathroom or household detergents,
benzene, thinner, cleanser or nylon scrubber to avoid damage
to the Main Body.
- 14 / 22 -
MV
SPA
Y
Problem
No bubble
s spouting
during use
Water
coming ou
t from the
bottom of
the Main
Check Point
• Check if the Nozzle Head is out of the water
during use.
• A little amount of water may come out from the bottom of the Main Body during use.
This is normal as the water circulates with the air during the automatic pressure control
inside the pressure tank in the Main Body.
Expose the Inlet Nozzle Head to the air
Trouble Shooting
outside water to idle for
about 20 seconds.
E
G
A
Body
MV
SPA
- 16 / 22 -
Product Specification
The Product specification and design may be subject to change without prior notice .
Y
1
2
3
4
5
6
POWER
Consumption
Standard Flow
Bath Time Setting
Bathtub
Water Temp.
DC 40V
90W
4+-0.5 L/MIN
20 MIN
GERNERAL HOUSEHOLD
BATHTUB, 200 L
5 ~ 40 ℃
E
G
A
7
8
Dimension
Weight
- 17 / 22 -
W390 * D200 * H290
7Kg
MV
SPA
Consumer Indemnity
In case of
normal
breakdown
or
malfunction
under
normal use
(within the
warranty
period)
Type of Consumer Injuries
Within warranty Outside warranty
If major repair is necessary within 10 days after purchase Replacement or refund
If repair on major parts is necessary within 1 month after pur
chase
If the replaced product requires major repair within 1 month
If replacement is impossible
If there is a defect
If the same defect reoccurs after repair (on the 4thdefect)
th
If defects keep occurring after 4 repairs in total (on the 5
efect)
If the product becomes irreparable
If product repair is unfeasible due to lack of parts for repair
If the product returned to a retailer for repair gets lost
If damage occurs during transit or installation after purchase
d
Complimentary repair service
Replacement
Refund
Replacement
or
Refund
Replacement
Relief
Refund the depreciated
value plus 10% of that
value
Y
E
G
A
Product breakd
own or malfunc
tion due to con
sumer’s acciden
tal or intentiona
l act
• breakdown due to force majeure (fire, sea water, earthquake, storm/flood)
• replacement of consumable parts for normal wear and tear
• breakdown due to faulty power supply or connector
• breakdown due to external factors other than the defects on the product itself
• breakdown due to unauthorized repair or alteration
If the product is repairable
If the product is irreparable due to no parts for repair in stock
- 18 / 22 -
Chargeable repair service
Replacement after deducting the
value equivalent to the chargeabl
e repair service
Chargeable repair service
Chargeable repair ser
vice
MV
SPA
Ministry of Strategy & Finance
Consumers’ Rights
Consumers have valuable rights to complimentary services for a period of one year
from the date of purchase against Product breakdown during use. If however
the breakdown is due to consumers’ own fault or force majeure, repair services will be
charged even during the warranty period
Y
E
Chargeable Services
After-sales services will be provided at cost even during the warranty period
if the breakdown is due to one of the following:
1. If foreign materials (such as water, drink or small object) get inside the Product
2. If the Product is dropped or subject to severe impact
3. If the Product is exposed to abrasive solvents such as thinner or benzene
4. If non-genuine parts or consumables are used
5. If incorrect electricity voltages are applied
6. If parts or components are lost or damaged by unauthorized disassembly
7. If the product is altered or repaired by an unauthorized technician
8. If the product is damaged due to force majeure (lightening, fire, storm/flood, gas, sea water, earthquake, etc)
9. If the “safety warnings” in the User’s Manual are not observed
(Product life can be extended if the “safety warnings” are duly observed.)
10. If the breakdown is due to users’ fault
- 19 / 22 -
G
A
MV
SPA
Y
Customer Card
Product Name: Nano/Micro Bubbler (for home use)
Model Name :
Date of Purchase :
Name of Customer: Tel: Address:
Name of Retailer: Tel: Address:
1. Please fill out all necessary data before giving to the customer.
2. This Customer Card should be retained by the Retailer for Customer Care.
Others:
Warranty
is 1 year
E
G
A
- 20 / 22 -
MV
SPA
Product Warranty
Product Name: Nano/Micro Bubbler (for home use)
Model Name :
Y
E
Date of Purchase:
Name of Customer: Tel: Address:
Name of Retailer: Tel: Address:
Please keep this Warranty safe as you will be asked to show
this Warranty at the time of claiming your After Sales Services.
1. The Company provides the Product warranty in accordance with the terms and conditions of the Warranty.
2. The warranty period takes effect from the date of purchase. Please ensure that the date of
purchase is written in the Warranty. (If the date of purchase is not shown, the warranty period shall be
deemed to be effective as of 6 months from the date of manufacture.)
3. If the Product is used for commercial use (for sales purposes or for other use), or the product is
for industrial use, then the warranty period shall be shortened to 6 months.
4. This Warranty shall not be reproduced.
- 21 / 22 -
G
A
MV
SPA
QUICK REFERENCE
1. The water temperature for Bubble Spa should be within the range of 38~40ºC.
2. Limit the time for use to less than 10 minutes for children, the elderly or
the physically impaired to allow users to familiarize with the Product.
Progressively prolong the time for use.
3. Although soaps or bath/shower gels may be used before or after
the Bubble Spa, do not use with the product. If you have sensitive skin or
suffer atopy, experience the effects of the product without any soap or
bath/shower gels
4. Please consult with a physician before use if you suffer from heart disease,
or abnormal blood pressure.
Y
E
G
A
5. Refrain from using the product and rest
if you feel over-fatigued during the Bubble Spa.
6. When air intake is insufficient, bubbles may become thinner during use.
Expose the Inlet Nozzle Head to the air out of the water to idle for
about 20~30 seconds. You can enjoy a more effective Bubble Spa.
- 22 / 22 -
MV
SPA
Loading...