MVE Fusion Quick Reference Manual
MVE Fusion Series
Quick Reference Guide
Table of Contents
Product Identification
Display / Control Panel……………………………………………………………………………………………………………….3
Bottom Panel / Electrical / Physical Connections ……………………………………………………………………….4
Dewar Plumbing Connections…………………………………………………………………………………………………….5
Setup/Filling Procedure ……………..………………………………………………………………………………………………6
Calibration of Temperature Probe.…………………………………………………………………………………………….10
Alarms and Definitions………………………………………………………………………………………………………………11
Contact Information………………………………………………………………………………………………………………….11
MVE FUSION Quick Reference Guide
NOTE: MVE Fusion cryogen freezer should be installed by Chart Personal or an
authorized MVE Distributor per the MVE Fusion Technical Manual, PN 20994124.
2 – 21205647 B
MVE FUSION Quick Reference Guide
Front Panel
MVE FUSION Graphical User Interface (GUI)
Temp A and Liquid Nitrogen (LN2) % with Timeline Graph.
Display
A Liquid Crystal Display (LCD) shows the value of all the current
conditions including Temperature and LN2 level. The display also shows
any current alarm conditions that may exist.
Temperature Probe
Used to monitor internal Fusion freezer temperature.
Setup
Used to adjust the value of all the user adjustable functions including
Temperature, Alarms, Passwords, Etc.
Alarm Mute
Used to silence the audible alarm. Also used to reset the latching alarm
after the alarm condition is corrected.
Display / Control Panel
Table 1: Front Panel Identification
3 – 21205647 B
MVE FUSION Quick Reference Guide
1
Temp Probe
2
Global Alarm Contacts (These connections monitor All Alarms)
3
Service Port
4
Service Port
5
Input Power
6
Main Power Switch
7
Battery Backup Switch
4
3
2 1 65 7
Bottom Panel / Electrical / Physical Connections
4 – 21205647 B
Loading...