MuxLab VideoEase 500410 Installation Manual
VideoEase™
HDMI 3x1 Switcher Kit
500410 (110V)
Installation Guide
P/N: 94-00628-A SE-000627-A
© MuxLab Inc. HDMI 3x1 Switcher Kit Installation Guide
Page
2
Copyright Notice :
Copyright © 2008 MuxLab Inc. All rights reserved.
Printed in Canada. No part of this publication may be reproduced,
stored in a retrieval system, or transmitted in any form or by any
means, electronic, mechanical, photocopying, recording, or
otherwise without prior written permission of the author.
Trademarks :
MuxLab and VideoEase are registered trademarks of MuxLab Inc.
© MuxLab Inc. HDMI 3x1 Switcher Kit Installation Guide
Page
3
Table of Contents
1. Overview .........................................................................4
1.1. Description........................................................4
1.2. Features ………………………………………5
2. Technical Specifications ................................................6
3. Installation Procedure ...................................................8
3.1. Parts List ...........................................................8
3.2. Product Overview .............................................9
3.3. Pre-Installation Checklist................................10
3.4. Installation Procedure .....................................11
4. Troubleshooting ...........................................................13
5. Product Warranty Policy ............................................15
© MuxLab Inc. HDMI 3x1 Switcher Kit Installation Guide
Page
4
1.
Overview
1.1. Description
The VideoEase HDMI 3x1 Switcher Kit allows up to
three (3) different HDMI sources to be connected to one
(1) HDMI display via two (2) Cat5e unshielded twisted
pair cables in a point-to-point configuration. The kit
includes one transmitter and one receiver and supports
up to 250 ft (75m) at 1080i via Cat5e cable.
© MuxLab Inc. HDMI 3x1 Switcher Kit Installation Guide
Page
5
1.2. Features
• Up to 250 ft (75m) @ 1080i via two (2) Cat5e cables
• Push button switch control
• Supports DVI
• 2 year limited warranty
© MuxLab Inc. HDMI 3x1 Switcher Kit Installation Guide
Page
6
2.
Technical Specifications
Environment
HDMI 1.2 and DVI-D
Devices
DVD, plasma, projectors, monitors, TV, PC, laptops,
servers supporting HDMI or DVI-D
Transmission
Transparent to the user.
Bandwidth
165MHz
Signals
HDMI or DVI-D protocol
Connectors
Transmitter: Three (3) HDMI receptacles. Two (2) RJ45
Receiver: One (1) HDMI receptacle. Two (2) RJ45
Max. Distance
480i/p: Cat5e: 280 ft (85 m) Cat6: 280 ft (85 m)
720p, 1080i: Cat5e: 250 ft (75 m) Cat6: 280 ft (85 m)
1080p: Cat5e: 100 ft (30 m) Cat6: 130 ft (40m)
When installed in an electrically noisy environment, STP cable
must be used. Also, cross connections reduce the effective
distance depending on the grade of twisted cable used.
RJ45 Pin
Configuration
Reverse Polarity
Sensitive
Use EIA/TIA
568 A or B,
straight-through
wiring
RJ45 A (Video)
Pin 1 (R) Pin 2 (T)
Pin 3 (R) Pin 6 (T)
Pin 4 (R) Pin 5 (T)
Pin 7 (R) Pin 8 (T)
RJ45 B (DDC)
Pin 1 (R) Pin 2 (T)
Pin 3 (R) Pin 6 (T)
Pin 4 (R) Pin 5 (T)
Pin 7 (R) Pin 8 (T)
Cable
Two (2) Category 5e or better twisted pair cables required.
Switch
Push button port selector on transmitter and receiver
LED indicators
Power, Sync, Input Select
Temperature
Operating: 0º to 55º C. Storage:-20º to 85º C. Humidity:
up to 95% non-condensing.
Enclosure
ABS fire retardant plastic
Dimensions
4.5” x 3.8” x 1.25” (11.4 cm x 9.7 cm x 3.2cm)
Weight
11.6 oz (332 gms)
Compliance
Regulatory: FCC Class A. Flammability: 94V0
Warranty
2 years
Order
Information
500410 HDMI 3x1 Switcher Kit, 110V
Loading...