Muxlab LongReach CCTV IP PoE Extender Kit, 1KM User Manual
Specifications
Environment
PoE CCTV IP
Devices
PoE CCTV IP camer as with a 10/100Mb/s Ethernet port, using up to
15.4 Watts.
Transmission
Transpare nt to t he us er
Standard supported
Ethernet side:
IEEE 802.3af compatible PoE (on camera side only)
PoE Power
Class 3
Connectors
One (1) BNC 75 O hm s .
One (1) RJ45S f o r Ca t 5e/6 unshielded o r s hielded twis ted pair.
LED Indicators
Power, IP Traffic, 100MBps
Throughput
Unidirectional Mode: 100 Mbps do wnstream and 1 Mbps upstre am
Bidirectional Mo de: 60 Mbps downs tr eam and upstream
Maximum Distance
RG59/RG6: Up to 3281 ft (1000m) @ 100Mbps
distance depending on the grade of twisted c able u se d.
RJ45 Pin
RJ45 Link
Cable
UTP/STP: One (1) Cat 5e/6 or better twisted pair cables required
RG59/RG6: 75 O hm s ( av oid CCS cable)
Power Supply
One (1) 110-240V/24VDC 2.7A .
Power Consumption
Networ k S i de : 1.82 Watt Camera Side: 1.73 Watt
Temperature
Operating: 0° to 40°C Storage: -20° to 85°C
Humidity: U p t o 95% no n-condensing
Enclosure
Metal
Accessories
Wall-mount brackets incl ude d
Dimensions
4.37” x 2.95” x 0.99” (110 x 75 x 25 m m )
Weight
2 lb (0.91 kg)
Compliance
Regulatory: FCC, CE, RoHS Flammability: 94V0
Warranty
2 years
Order Information
500114-US CCTV IP PoE Extender Kit, 1Km, US
500114-EU CCTV IP PoE Extender Kit, 1Km, EURO
Configuration
Reverse Polarity
Sensitive. Use EIA/TIA
568A or 586B straightthrough wiring.
IEEE 802.3 10Bas e T,
IEEE 802.3U 100 Bas e-TX
UTP Cat 5e/6: Up to 330 ft (100 m)
Note: When installed in an electr ical ly nois y envi ronment, an STP
cable must be used. Also, cross-connection reduces the effective
Pin 1 (R) Pin 2 (T)
Pin 3 (R) Pin 6 (T)
Pin 4 (R) Pin 5 (T)
Pin 7 (R) Pin 8 (T)
LongReach CCTV IP PoE
Extender Kit, 1Km
500114
Quick Installation Guide
Overview
The LongReach CCTV IP PoE Extender Kit, 1Km (500114) allows one IP camera (15.4
Watts) to be connected up to 3281 ft (1000m) via a single 75-ohm coax cable in a pointto-point configuration. The maximum distance depends on the grade and quality of
coaxial cable.
Applications
CCTV IP surveillance
Installation
1. Identify the connectors on the Extenders as indicated on the product labels.
500114-UK CCTV IP PoE Extender Kit, 1Km, UK
8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5
Tel: (514) 905-0588 Fax: (514) 905-0589
© MuxLab Inc. 94-000762-A SE-000762-A
E-mail: videoease@muxlab.com URL: www.muxlab.com
Toll Free (North America): (877) 689-5228
© MuxLab Inc. 2014
2. Attach the surface-mount brackets if required as shown below.
Network Side
LEDs
Camera Side
LEDs
Possible
Solutions
Power
IP Traffic
Power
IP Traffic
No Image
OFF
OFF
OFF
OFF
No power
• Check the power
connection.
No Image
ON
OFF
OFF
OFF
Coaxial Cable
• Check the coaxial
cables.
No Image
ON
OFF
OFF
OFF
Distance
• Check the coaxial
quality.
No Image
ON
OFF
ON
OFF
UTP Cable
• Check the UTP Cable
pin out.
No Image
ON
ON
ON
ON
No Traffic
• Check network
configuration.
Choppy Image
ON
BLINK
ON
BLINK
Distance
• Check cable length
cable quality.
3. Verify that the distan ce between the CCTV IP PoE extenders is within MuxLab
specifications (see Sp ecifications table).
4. To install the Network Side Device:
4a. Connect the extender to the PoE Ethernet Switch with a UTP Cable.
4b. Connect one (1) length of RG59 or RG6 coaxial cable to the COAX
LINK connector on the Extender.
5. To install the Camera Sid e D evi ce:
5a. Connect t he extender to the camera with a Cat 5e/6 cable.
5b. Connect one (1) length of RG59 or RG6 coaxial cable to the COAX
LINK connector on the Extender.
6. Connect the 24VDC Power supply to the network side device first, and then plug
the power supply into an AC power outlet. If power is present, the green power
LED of the Network and Camera side devi ce will be ON.
7. Power on the equipment and verify the image quality. The following is a diagram
of a typical configuration.
Tables
Troubleshooting
The following table describes some of the symptoms, probable causes and possible solutions
in respect to the installation of the LongReach CCTV IP PoE Extender Kit, 1Km:
Symptom
Probable Cause
© MuxLab Inc. 2014
cables length and
• Check the coaxial
If you still cannot diagnose the problem, please call MuxLab Customer Technical Support at
877-689-5228 (toll-free in North America) or (+1) 514-905-0588 (International).
© MuxLab Inc. 2014
Loading...