Muxlab HDMI Over Coax Extender Kit User Manual

Specifications

Environment

Devices

Transmission
Bandwidth
Signals
Supported Resolution
Connectors

Maximum Distance

Based on a maximum
length of 6.6 ft (2 m) of
HDMI cable per end.

Cable
Power Supply
Power Consumption
Temperature

Enclosure
Dimensions
Weight
Compliance
Warranty
Order Information

HDMI 1.3a
DVD, plasma, projectors, monitors, TV, PC, laptops, servers supporting

HDMI.
Transparent to the user
225 MHz
HDMI 1.3a
480i, 576i, 720p, 1080i, 1080p/23.98/24/25/29.9/30/50/59.94/60
One (1) HDMI receptacle.
Two (2) BNC Female 75 Ohms.

Note: HDMI cables not included.

480i: RG-59: 650 ft (198 m) RG-6: 800 ft (244 m)
720p, 1080i: RG-59: 500 ft (152 m) RG-6: 650 ft (198m)
1080p: RG-59: 250 ft (76 m) RG-6: 300 ft (91 m)

One (1) RG-59 or better cable required
Two (2) 110-240V/5VDC power supplies with interchangeable blades
Transmitter: 3.30 Watt Receiver: 3.55 Watt
Operating: 0° to 40°C Storage: -20° to 85°C
Humidity: Up to 95% non-condensing
Metal

4.72” x 3.54” x 1.18” (12.0 x 9.0 x 3.0 cm)

1.3 lb (0.59 kg)
Regulatory: FCC, CE, RoHS Flammability: 94V0
2 years
500465 HDMI Over Coax Extender Kit

HDMI Over Coax Extender Kit

500465

Quick Installation Guide

Overview

The HDMI Over Coax Extender Kit (500465) allows HDMI equipment to be connected
up to 250 ft (76 m) @ 1080p via one (1) RG-59 coaxial cable in a point-to-point
configuration. The Transmitter converts the HDMI signal to coax and the Receiver
converts the coax signal back to HDMI, supporting resolutions of 480i, 720p/1080i and
1080p. The kit comes with one (1) Transmitter and one (1) Receiver.

Applications

Applications include commercial and residential AV systems, classroom projector
systems, digital signage, boardroom systems, collaborative PC systems, and medical
information systems.

8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5

Tel: [phone] Fax: [phone]

Toll Free (North America): [phone]

E-mail: [e-mail] URL: www.muxlab.com

© MuxLab Inc. 94-000746-A SE-000746-A

Installation

1. Identify the connectors on the Transmitter and Receiver as indicated on the
product labels.

2. Verify that the distance between the Transmitter and Receiver is within MuxLab
specifications (see Specifications table).

3. To install the Transmitter:

3a. Connect the Transmitter to the HDMI video source with an HDMI compliant

cable.

3b. Connect one (1) lengths of RG-59 (or higher) grade coaxial cables to

RJ45 LINK connectors on the Transmitter.

4. To install the Receiver:

4a. Connect the Receiver to the HDMI display equipment with an HDMI compliant

cable.

4b. Connect the one (1) RG-59 coaxial cables to RJ45 LINK connectors on the

Receiver.

5. Connect the 5 VDC power supply to the Receiver first, and then plug the power
supply into an AC power outlet. Connect the 5 VDC power supply to the
Transmitter first, and then plug the power supply into an AC power outlet. If power
is present, the green power LED of the Transmitter and the Receiver will be ON.

Note: Power the HDMI Over Coax Extender only after all connections are made.

6. Power the HDMI equipment and verify the image quality.

7. This product can be daisy chained by connecting additional Receivers to the
second port. This is achieved by connecting the BNC output of the first HDMI
Receiver to the BNC input of the cascade receiver.

8. The following diagram shows the final configuration.

Troubleshooting

The following table describes some of the symptoms, probable causes and possible solutions
in respect to the installation of the HDMI Over Coax Extender Kit:

Symptom

No Image OFF OFF OFF OFF OFF OFF No power • Check power

No Image ON OFF OFF ON OFF OFF Source • Check the HDMI

No Image ON ON OFF ON OFF OFF Resolution • Check if the source

No Image ON ON ON ON OFF OFF Coaxial Cable • Check the coaxial

No Image ON ON ON ON OFF ON Display • Check the HDMI

Flickering
Image

Choppy sound ON ON ON ON ON ON Synchronization • Check cable length

Tx LEDs Rx LEDs

Power HDMI Coax Power HDMI Coax

ON ON ON ON ON ON Synchronization • Check cable length

If you still cannot diagnose the problem, please call MuxLab Customer Technical Support at
877-689-5228 (toll-free in North America) or ([phone] (International).

Probable

Cause

Possible

Solutions

connections

cable at the source.

resolution is valid.

cable.

cable at the display.

• Check the HDMI
Cable Quality.

• Check the HDMI
Cable Quality.

© MuxLab Inc. 2013