Muxlab HDMI 4K 1x8 Splitter User Manual
@
m
Specifications
Environment
Devices
Transmission
Frequency
Signals
Connectors
LEDs
Resolution
Color
Audio
HDCP
Cable
Temperature
Enclosure
Dimensions
Weight
Compliance
Warranty
Order Information
HDMI 1.4 (3D)
DVD/Blu-Ray, plasma, projectors, monitors, TV, PC, laptops
Transparent to the user
25 to 340 MHz
HDMI 1.4 protocol
HDMI receptacle.
Power: Green
Input & Output Link: Blue
480i to 1080p @ 50/60 FPS
1080p @ 24/50/60 FPS
3840 X 2160 @ 24/25/30 FPS
VGA to UXGA
8, 10 & 12 bit
LPCM 7.1CH, Dolby TrueHD and DTS-HD Master Audio
Revision 1.3
HDMI Cable
Operating: 0° to 40°C Storage: -20° to 60°C
Humidity: up to 90% non-condensing
Metal enclosure
10.63” x 4.33” x 1.18” (270 mm x 110 m m x 30 mm )
3.2 lbs (1.45 Kg)
Regulatory: FCC, CE, RoHS
2 years
500422 HDMI 1X8 Splitter, 2K-4K
HDMI 1X8 Splitter, 2K-4K (500422)
Quick Installation Guide
Overview
The HDMI 1x8 Splitter (500422) allows one (1) HDMI source to be distributed to
up to eight (8) HDMI displays. The splitter supports up to 4K (3840 X 2160), 8-bit
color and HD audio. The splitter is HDCP 1.3 compliant and features LED
diagnostics. Additionally, all HDMI connectors are on the rear panel for neater
cabling. Applications include; commercial and residential AV systems, classroom
projector systems, digital signage, boardroom systems, collaborative PC systems,
medical information systems.
Pre-Installation Check
Identify the connectors as indicated on the product
8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5
Tel: (514) 905-0588 Fax: (514) 905-0589
Toll Free (North America): (877) 689-5228
E-mail: videoease
© MuxLab Inc. 2014 94-000756-A SE-000756-A
muxlab.com URL: www.muxlab.co
Installation
In order to install the HDMI 1X8 Splitter, please follow the steps below:
1. Connect the HDMI video source to the input connector of the splitter.
2. Connect the HDMI display equipment(s) to output connector of the splitter.
3. Connect the 5 VDC power supply to the splitter first, and then plug the power
supply into an AC power outlet.
4. Power on the HDMI equipment and verify the image quality.
5. The following diagram shows the final configuration.
Troubleshooting
The following tables describe some of the symptoms, probable causes and possible solutions
in respect to the installation of the HDMI 1X8 Splitter. If you still cannot diagnose the
problem, please call MuxLab Customer Technical Support at 877-689-5228 (toll-free in
North America) or (+1) 514-905-0588 (International).
Picture/
Sound
No Image Wiring Check continuity
No Image Synchronization Power off the source and the
Flickering
Image
Choppy
Sound
Noise in
image
Green or
pink hue
Probable Cause Possible Solution
Check correct wiring
display. Power on the devices.
Synchronization Check HDMI cable length
Synchronization Check HDMI cable length
Weak signal Check HDMI cable length
Cable Check HDMI cables and
replace.
© MuxLab Inc. 2014
Loading...