3G-SDI/ST2110 over IP Uncompressed Gateway Converter
HD/3G-SDI cameras, mixers, media players, monitors, TV, PC, laptops, servers supporting HDMI.
SDI protocol (supports ST-2110)
Connectors/Switches
Note: Cables not included.
One (1) BNC connector for SDI.
One (1) SFP for Ethernet and UTP connection to a 10G Ethernet Switch for transmission & control.
One (1) RJ45S for 1G Ethernet Switch port for additional network devices.
One (1) RS232 3-Pin Phoenix connector.
One (1) 2.1mm locking power connector.
Four (4) DIP Switches for device ID addressing.
Cat 6a/7: 100ft (30m) up to 1080P @ 60Hz
OM4: 1300ft (400m) up to 1080p @ 60Hz, OM3: 985ft (300m) up to 1080p 2 60Hz
Coax: 689ft (210m) @ 2.97Gbps and 985ft (300m) @ 1.485Gbps (using Belden 1694A cable)
Note: When installed in an electrically noisy environment, an STP cable must be used. Also, crossconnection reduces the effective distance depending on the grade of twisted cable used.
RJ45 Pin Configuration
Reverse Polarity Sensitive. Use EIA/TIA
568A or 586B straight-through wiring.
RJ45 Link
Pin 1 (R) Pin 2 (T)
Pin 3 (R) Pin 6 (T)
Pin 4 (R) Pin 5 (T)
Pin 7 (R) Pin 8 (T)
One (1) Duplex multi-mode fiber cable (for MM Fiber version).
One (1) Cat 6a/7 or better twisted pair cables (for UTP version).
One (1) 12VDC Power Supply included per Transmitter and per Receiver.
Operating: 0° to 40°C Storage: -20° to 85°C
Humidity: Up to 95% non-condensing
4.4” x 4.6” x 1.0” (111mm x 120mm x 25mm)
Regulatory: FCC, CE, RoHS Flammability: 94V0
500767-TX-UTP 3G-SDI/ST2110 over IP Uncompressed Transmitter, UTP (UPC: 627699907672)
500767-RX-UTP 3G-SDI/ST2110 over IP Uncompressed Receiver, UTP (UPC: 627699807675)
500767-TX-MM 3G-SDI/ST2110 over IP Uncompressed Transmitter, MM (UPC: 627699917671)
500767-RX-MM 3G-SDI/ST2110 over IP Uncompressed Receiver, MM (UPC: 627699817674)
Accessories
(These items are sold separately)
500920 16-Port Rackmount Transceiver Chassis
500917 Wall Mount Transceiver Bracket Kit
500767
Overview:
The 3G-SDI/ST2110 over IP Uncompressed Gateway
Converter allows HD-SDI and 3G-SDI equipment to be
extended up to 100ft (30m) via UTP Cat 6a/7 cable or up to
1300ft (400m) via duplex multimode OM4 fiber with LC
connectors, at up to 1080p resolution @ 60Hz
uncompressed, in a point-to-point configuration. Point-tomultipoint and multipoint-to-multipoint configurations are also
possible by connecting several units to a 10G Ethernet
network. The unit provides a 1G Ethernet Switch port to
connect additional network devices, and an RS232 port for
remote control of end devices.
The 3G-SDI/ST2110 over IP Uncompressed Gateway
Converter supports SMPTE ST-2110. It can be managed
through its Web interface and RestAPI.
Applications:
Commercial broadcast AV systems
News/sports/TV stations
Movie networks/studios
Key Features:
Transmit Uncompressed SDI video up to 3G-SDI (1080p @
60Hz) over a 10G Ethernet network
Supports the SMPTE ST-2110 protocol
Extend up to 100ft (30m) over Cat 6a/7, or 1300ft (400m)
over OM4 fiber
Number of Transmitters & Receivers limited only by the
network bandwidth
Supports point-to-point, point-to-multipoint and multipoint-
to-multipoint applications
Supports a 1G Switch port for additional network devices
Supports RS232 for remote control of end devices
Managed via its Web interface and RestAPI
© MuxLab Inc. 2019 3G-SDI/ST2110 over IP Uncompressed Gateway Converter
3G-SDI/ST2110 over IP Uncompressed Gateway Converter
MuxLab Inc.
2321 Cohen St, Montreal, Quebec, Canada, H4R 2N7
Tel: (514) 905 0588 Fax: (514) 905 0589
Toll Free:1 877 689-5228
E-mail: info@muxlab.com
www.muxlab.com
500767
_____________________________________________________________________________________________
Typical Application
* MM Fiber version shown
© MuxLab Inc. 2019 3G-SDI/ST2110 over IP Uncompressed Gateway Converter