MuxLab 500715, 500716 Data Sheet
3G-SDI to HDMI & LongReach 3G-SDI to HDMI Extender Kit
Environment
SDI single link: SD, HD & 3G.
Devices
Monitors supporting the original SDI rate only.
Standard supported
SMPTE 259M (270Mb/s), SMPTE 292M & SMPTE 424M.
Bit rates
270Mb/s, 1.485Gb/s & 2.97 Gb/s (automatic selection).
Video format supported
SD: 525i, 59.94/60Hz & 625i, 50Hz
3G: 1080p @ 60Hz & 50Hz
Sound format
supported
48kHz @ 24 bit, 20 bit & 16 bit.
Indicators
Power
HDMI Sync (on rx side only)
Connectors
One BNC 75 ohm female on source side.
One power connector, 2mm.
Maximum Distance
UTP Cat 5e: 330 ft (100 m) UTP Cat 6: 400 ft (122 m) for 500715
On HDMI side: 15 ft (5 m) typical.
RJ45 Pin Configuration
RJ45 Link
Cables
One straight Cat 5e/6 twisted pair cables required.
One HDMI cable.
Power Supply
(Included)
Two 100-240V/5VDC 6W power supplies with interchangeable blades
for NA, Europe and UK.
Power Consumption
Transmitter: 4 Watts Receiver: 6 Watts
Temperature
Operating: 0° to 40°C Storage: -20° to 85°C
Humidity: Up to 95% non-condensing
Enclosure
6061 Aluminum alloy
Dimensions
4.50” x 3.00” x 1.25” (11.4 x 7.6 x 3.2 cm)
Weight
2.5 lb. (1.1 kg)
Warranty
2 years
Order Information
500715 HD-SDI to HDMI Extender Kit
500716 LongReach HD-SDI to HDMI Extender Kit
Overview
The 3G-SDI & LongReach 3G-SDI toH DMIExtend erKit
converts HD-SDI to HDMI and then transmits it
up to 330 ft (100m) via Cat5e cable at all
resolutions in a point-t o-point
500715 allows a more
display to be used instead of a more costly
HD-SDI monitor in video production
applications. Furthermore the 500715
eliminates the need for a separate HD-SDIto-HDMI converter and HDMI extender
thereby minimising the number of points of
failure and providing a total end-to-end
solution.
The
HDMI
500715, 500716
500715
Key Features
Up to 330 / 500 ft via Cat5e cable
Up to 400 / 500 ft via Cat6 cable
Supports
HDMI displays versus
more costly HD-SDI monitors
Supports SDI-SMPTE 259M-C (270Mbps) HDSDI-SMPTE 292M (1. 485, 1.485/1.001 Gbps)
HD-SDI-SMPTE 424M/425M (2.97/3.0 Gbps)
LED diagnostics: sync, SDI detect
(monitor must support
the original SDI rate)
On each unit
Use EIA/TIA 568A or
586B straight-through
wiring only.
(Not included)
HD: 720p @ 60Hz, 50Hz, 30Hz, 25Hz & 24Hz
1080i @ 60Hz & 50Hz
1080p @ 30Hz, 25Hz & 24Hz
SDI Sync (on rx side only)
RJ45 Sync
Video (on tx side only)
Sound (on tx side only)
One HDMI on receiver on receiver side
One RJ45S for Cat5e/6 unshielded twisted pair.
UTP Cat 5e: 500 ft (150 m) UTP Cat 6: 500 ft (150 m) for 500716
Maximum distance applies for all format and speed between boxes. On
SDI side: 450 ft (140m).
Pin 1 (R) Pin 2 (T)
Pin 3 (R) Pin 6 (T)
Pin 4 (R) Pin 5 (T)
Pin 7 (R) Pin 8 (T)
One 75 ohm coaxial cables with 75 ohm BNC required.
© MuxLab Inc. 2014
3G-SDI to HDMI Extender Kit & LongReach 3G-SDI to HDMI Extender Kit
3G-SDI to HDMI & LongReach
3G-SDI to HDMI Extender Kit
500715, 500716
________________________________________________________________ _ _________________
Typical Application
© MuxLab Inc. 2014
Rear panel
MuxLab Inc.
8495 Dalton Road, Mount Royal, Quebec,
Canada, H4T 1V5
Tel: (514) 905 0588 Fax: (514) 905 0589
Toll Free:1 877 689-5228
E-mail: videoease@muxlab.com
URL:www.muxlab.com
3G
-SDI & LongReach 3G-SDI Extender Kit
Loading...