MuxLab 500441 Installation Manual
© Muxlab Inc. 2015 94-000791-A / SE-000791-A
HDMI 8x8 Matrix Switch UHD-4K
Installation Guide
500441
HDMI 8x8 Matrix Switch, UHD-4K Installation Guide
© Muxlab Inc. 2015 1
SAFETY PRECAUTIONS
To insure the best performance from the product, please read all
instructions carefully before using the device. Save this manual for
future reference.
Follow basic safety precautions to reduce the risk of fire, electrical
shock and injury.
Do not dismantle the housing or modify the module. It may result in
electrical shock or burn.
Do not open or remove the housing of the device as you may be
exposed to dangerous voltage or other hazards.
To prevent fire or shock hazard, do not expose the unit to rain,
moisture and do not install this product near water. Keep the
product away from liquids.
Spillage into the housing may result in fire, electrical shock, or
equipment damage. If an object or liquid falls or spills on to the
housing, unplug the module immediately.
Do not use liquid or aerosol cleaners to clean this unit. Always
unplug the power to the device before cleaning.
Using supplies or parts not meeting the products’ specifications
may cause damage, deterioration or malfunction.
Refer all servicing to qualified service personnel.
Install the device in a place with adequate ventilation to avoid
damage caused by overheat.
Unplug the power when left unused for a long period of time.
Information on disposal of devices: do not burn or mix with general
household waste, please treat them as normal electrical waste.
NOTICE: Please read this manual carefully before using this product.
HDMI 8x8 Matrix Switch, UHD-4K Installation Guide
© Muxlab Inc. 2015 2
Table of Contents
1.Introduction ......................................................................................... 2
2. Features .............................................................................................. 3
3. Package Contents ................................................................................ 3
4. Specifications ...................................................................................... 4
5. PANEL Description .............................................................................. 5
5.1 Front Panel................................................................................. 5
5.2 Rear Panel .................................................................................. 9
6. Remote Control ................................................................................. 12
8. Operate and Connect........................................................................ 13
Regulatory Compliance ......................................................................... 15
1.Introduction
The HDMI 8x8 Matrix, UHD-4K connects eight HDMI sources to eight
displays. This matrix provide eight HDMI outputs and each HDMI
output is supporting 1080p Full HD up to 4K plus all 3D formats and
supporting independent EDID control. It works with Blu-Ray players,
Set-Top boxes, Home Theater PCs, and game consoles that connect to
an HDMI display. Any source is accessible at all times by any display by
selecting it via the supplied IR Remote Control, RS-232, TCP/IP or by
using the selection buttons on the front panel.
HDMI 8x8 Matrix Switch, UHD-4K Installation Guide
© Muxlab Inc. 2015 3
2. Features
HDMI V1.4 supports: 4K x 2K @30Hz, 1080P @120Hz, and
1080P 3D @60Hz.
Deep Color support 48/36/30/24-bit.
Supports LPCM 7.1CH, Dolby True HD, Dolby Digital Plus and
DTS-HD Master Audio transmission.
Allows any source to be displayed on multiple displays at the
same time.
Allows any HDMI display to view any HDMI source at any
time.
8-input ports support independent EDID.
Supports IR matrix and Digital Audio output.
Supports RS-232, remote control, on-panel control and TCP/IP
Control.
Front-panel LCD display for status feedback.
HDMI connectors with Locking nuts
3. Package Contents
One (1) HDMI 8x8 Matrix Switch, UHD-4K
One (1) 12V/2.5A DC power adapter
One (1)Installation Guide
One (1) HDMI Matrix IR Remote
Two (2) Mounting ears
One (1) RS232 serial cable
Eight (8) Wideband IR Tx cable
Nine (9) Wideband IR Rx cable
Notes：Please confirm if the product and the accessories are all
included. If not, please contact the location at which you purchased
the unit.
HDMI 8x8 Matrix Switch, UHD-4K Installation Guide
© Muxlab Inc. 2015 4
4. Specifications
Video Bandwidth
297 MHz
Support Video Resolution
480i,576i,480p,576p,720p,1080i,1080p@
24/30/50/60Hz, 4K@30Hz, 1080P3D@60Hz
Input Ports
Eight (8) HDMI Receptacle
One (1) RS-232
One (1) Ethernet Port (Control)
Nine (9) IR Sensor 3.5mm Jack
Output Ports
Eight (8) HDMI Receptacle
Eight (8) Digital Audio Output
Eight (8) IR Emitter 3.5mm Jack
ESD Protection
Human-body Model:
± 8kV (Air-gap discharge)
± 4kV (Contact discharge)
Power Supply
One (1) 110-240V/12VDC/2.5A power
supply with interchangeable blades
Dimensions
17.32”x7.87”x1.77” (440 × 200 × 45 mm)
Weight
5.10lb (2310 g)
Chassis Material
Metal
Silkscreen Color
Black
Operating Temperature
0 ºC to 40 ºC / 32 ºF to 104 ºF
Storage Temperature
−20 ºC to 60 ºC / −4 ºF to 140 ºF
Relative Humidity
20 to 90 % RH (non-condensing)
Power Consumption
23 W(max) / 0.5w(Standby)
Compliance
Regulatory: FCC, CE, RoHS
Warranty
2 Years
Ordering Information
500441 HDMI 8x8 Matrix Switch, UHD-4K
Loading...