How it Works
MuxLab
Loading...
500413
Operation Manual
25 pgs1.63 Mb0

MuxLab 500413 Operation Manual

HDMI 4x4 Matrix Switch Kit, HDBT, PoC,
4K/60
Installation & Operation Manual
500413
© MuxLab Inc. 2019 94-000913-A / SE-000913-A
SAFETY PRECAUTIONS
To insure the best from the product, please read all instructions carefully before using the device. Save this manual for further reference.
Follow basic safety precautions to reduce the risk of fire, electrical shock and injury
to persons.
Do not dismantle the housing or modify the module. It may result in electrical
shock or burns.
To prevent fire or shock hazard, do not expose the unit to rain, moisture or install
this product near water. Keep the product away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage.
If an object or liquid falls or spills on to the housing, unplug the module immediately.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to
the device before cleaning.
Using supplies or parts not meeting the product’s specifications may cause
damage, deterioration or malfunction.
Refer all servicing to qualified service personnel.
Install the device in a place with good ventilation to avoid damage due to
overheating.
Unplug the power cord when left unused for a long period of time.
Do not put any heavy items on the unit, nor on the extension cable.
Do not remove the housing of the device as you may be exposed to dangerous
voltage or other hazards.
Information on disposal of devices: do not burn or mix with general household
waste, please treat this device as normal electrical waste.
Unpack the equipment carefully and save the original box and packing material for
possible future shipment.
Please read this user manual carefully before using the product.
© MuxLab Inc. 2019 2
Contents
1.1. Introduction .................................................................................................... 4
1.2. Introduction to the HDMI 8x8 Matrix Switch Kit .............................................. 4
1.3. Features ......................................................................................................... 4
1.4. Package Content ........................................................................................... 5
Specification .............................................................................................................. 6
2.1. HDMI 8x8 Matrix Switch ................................................................................. 6
Panel Description ...................................................................................................... 8
3.1. HDMI 8x8 Matrix Switch Front Panel ............................................................. 8
3.2. HDMI 4x4 Matrix Switch Rear Panel .............................................................. 9
System Connections ............................................................................................... 10
4.1. Safety Precautions ....................................................................................... 10
4.2. System Diagram .......................................................................................... 10
4.3. Connection Procedure ................................................................................. 10
4.4. Connection with the HDBT Receiver ............................................................ 11
System Operations .................................................................................................. 12
5.1. Front Panel Button Control .......................................................................... 12
5.2. IR Control ..................................................................................................... 13
5.2.1. IR Remote .......................................................................................... 13
5.3. RS232 Control ............................................................................................. 13
5.3.1. RS232 connection ............................................................................. 13
5.3.2. Basic Settings .................................................................................... 13
5.3.3. RS232 Communication Commands ................................................... 14
5.3.4. Control Modes ................................................................................... 18
5.3.5. Web-Interface GUI for TCP/IP control ................................................ 19
Troubleshooting & Maintenance .............................................................................. 22
Regulatory Compliance ................................................................................................ 24
© MuxLab Inc. 2019 3
1.1. Introduction
1.2. Introduction to the HDMI 8x8 Matrix Switch Kit
This product is a professional 4K HDMI/HDBT Distribution Hub Kit, which consists of a HDMI 8x8 Matrix Switch, 8 HDBT Receivers and accessories.
The HDMI 8x8 Matrix Switch is a professional switch that consist of the following inputs and outputs, eight (8) HDMI IN ports (4K @ 60Hz), eight (8) IR Sensor ports, eight (8) IR Emitter ports, eight (8) HDBT OUT ports, eight (8) Digital RCA OUT ports, one (1) Ethernet port, and one (1) RS232 control port, eight (8) HDBT RS232 ports, two (2) HDMI output ports
All HDMI inputs can be selected by either the front panel buttons, IR, RS 232 and TCP/IP. The selected input source may be connected to any or all of the HDBT zoned outputs and the Local HDMI outputs.
The HDMI 8x8 Matrix Switch is capable of delivering 4K signals up to 40m and 1080p signals up to 70m via HDBT, and powering the receivers via a single UTP cable.
The HDMI 8x8 Matrix Switch supports EDID management and is HDCP 2.2 and 1.4 compliant.
Audio sources can be selected via RS232 and/or TCP/IP commands supported by the Matrix Switch, or by 3rd Party control.
1.3. Features
Supports HDMI 2.0 (4K/60 4:2:0) & HDCP 2.2, and is compliant with lower
standards. Capable of transmitting signals up to 4K @ 60Hz (4:2:0) & 1080p 3D.
Supports manual HDCP management and auto-detecting.
Transmits a 4K signal up to 8m via the HDMI port, or up to 40m via the HDBT
port.
Audio source is selectable via RS232 and/or TCP/IP commands.
8 HDBT outputs, support distances up to 70m at 1080p and 40m at 4K on a
single CAT5e/6 cable.
The HDBT Receivers are powered by the matrix switch via PoC technology.
LED indicators show real-time switching status.
Controllable via front panel, RS232, IR and TCP/IP.
Built-in Graphical User Interface (GUI) for TCP/IP control.
Powerful EDID management.
Easy installation, and is rack-mountable.
© MuxLab Inc. 2019 4
1.4. Package Content
One (1) HDMI 8x8 Matrix Switch
One (1) IR Remote
Two (2) Mounting Brackets
Nine (9) 3-pin Phoenix/Terminal Blocks
Two (2) Power Cord - North America
Two (2) Power Cord - European
One (1) 48V/2.5A DC PoH Power Adapter
One (1) 48VDC/2A DC Power Adapter
Please verify that the product and the accessories are all included; if not, please contact your dealer.
© MuxLab Inc. 2019 5
Specification
2.1. HDMI 8x8 Matrix Switch
Specifications
Environment HDMI 2.0
Devices Ultra HD Blu-Ray, media players/streamers, projectors,
monitors, TV, PC, laptops.
Transmission Transparent to the user.
Video Bandwidth 10.2Gbps (HDBT), 594Gbps (HDMI)
Maximum Pixel Clock
Signals and video resolution
Connectors Ten (10) HDMI connectors, including eight (8) inputs and two (2)
Audio Digital Audio: PCM, Dolby TrueHD, DTS-HD Master Audio
Cable HDMI cable of appropriate length for video resolution selected
297MHz (HDBT), 594MHz (HDMI)
HDMI 2.0 (4K/60 4:4:4 for HDMI outputs & 4K/60 4:2:0 for HDBT outputs) and HDCP 1.4 & 2.2
outputs.
Nine (9) RJ45 shielded connectors, including eight (8) for HDBT
Out, and one (1) for Ethernet unit management.
Sixteen (16) 3.5mm Jacks; for eight (8) IR Sensor & eight (8) IR
emitters to manage end devices.
Nine (9) 3-pin phoenix connectors, including eight (8) for RS232
to control end devices, and one (1) RS232 for unit management.
Eight (8) RCA connectors for digital Audio Output (2CH LPCM,
5.1 Dolby and DTS).
One (1) 2-pin phoenix connector for PoH 48VDC power supply.
One (1) 2-pin power connector for unit 48VDC power supply.
cat 5e/6 or better twisted pair cable required
© MuxLab Inc. 2019 6
Maximum Distance
Based on a maximum length of
6.6ft. (2m) of HDMI cable per end.Cables not included.
Compatible Receiver
Power Supply Two (2) 110-240VAC to 48VDC power supplies
Temperature Operating: 0° to 40°C Storage: -20° to 80°C
Enclosure Metal enclosure
Bracket Includes rack and wall mount bracket
Dimensions 500413 Matrix Switch: 17.5” x 3.7” x 9” (444.5mm x 94mm x
Shipping Weight 13.8 lbs (6.25 kg)
Compliance Regulatory: FCC, CE, RoHS
Warranty 2 years
Order Information 500413-US HDMI 8x8 Matrix Switch, HDBT, 4K/60, US
Cat 5e/6: Up to 230ft (70 m) @ 1080p. Up to 131ft (40m) @ 4K/30 (4:4:4), or 4K/60 (4:2:0) (also supports 4K/60 4:4:4 on the two HDMI outputs for local connectivity)
Note: When installed in an electrically noisy environment, an STP cable must be used. Also, cross-connections reduce the effective distance depending on the twisted pair cable used.
500454-PoE-RX
Humidity: Up to 90% non-condensing
229mm)
500413-UK HDMI 8x8 Matrix Switch, HDBT, 4K/60, UK 500413-EU HDMI 8x8 Matrix Switch, HDBT, 4K/60, EU
© MuxLab Inc. 2019 7
Panel Description
3.1. HDMI 8x8 Matrix Switch Front Panel
No. Name Description
1
2
3
4
5
LCD Show the menu and status of input-output selection,
EDID info, IP setup and more
IR IR sensor for the remote control of the 8x8.
HDMI Output HDMI output selection button 1 to 8: Press to select
the output from 1 to 8. ALL button: Press to select all the HDMI outputs from 1 to 8
HDMI Input HDMI input selection button 1 to 8：Press to select the
input from 1 to 8
Menu
Menu button: Press to enter Menu mode. Enter button: Press to confirm and save the setting. UP button: Press to change menu options. Down button: Press to change menu options.
© MuxLab Inc. 2019 8
Loading...
+ 17 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use