MuxLab 500130 Specsheet
VideoEase Passive CCTV Hub
Signa
5000
ode
500024/500029 Mode
500130, 500131
_____________________________________________________________________________________
Overview
The Passive CCTV Hub allows video, remote power
and PTZ control to be transmitted via one Cat5
cable, thus eliminating the need to install multiple
cables for more efficient cabling in the security
video environment. There are two 16-port models:
500130; with coax video output and 500131; with
twisted pair video output. The Passive CCTV Hub
works in conjunction with the 500000, 500009,
500015, 500022, 500023, 500024, 500029 and
500120.
Specifications
Environment
Devices
Transmission
Video
Bandwidth
Maximum Input
Insertion Loss
Return Loss
Common Mode Rejection
Max. Distance - Colour
Max. Distance - B&W
Remote Power
Switch Mode Pass-Thru Mode (500022) Power-Thru Mode (500024/500029)
Number of twisted pairs
Max. Distance @ 24VAC*
*Based on 10% voltage drop at
camera. Longer distances may be
achieved @ 28 VAC.
Maximum Input Voltage
Maximum Current Rating
2-Wire PTZ Control (i.e. RS-422, Manchester/Bi-Phase, half duplex RS485) – Pass-Thru Mode (500022)
Wiring
Maximum Distance
Maximum Power Rating
Mechanical & Environmental
Cable – UTP
Cable – Coax
Connectors
Port Configuration Switch
RJ45 Pin Configuration*
*Reverse polarity sensitive Power A (+) 1, 3 1, 3, 5
Temperature
Enclosure
Dimensions
Weight
Warranty
Order Information
© MuxLab Inc. 2005 VideoEase Passive CCTV Hub
Composite video; NTSC, PAL, SECAM
CCTV cameras, DVRs, monitors, switchers, multiplexers and other CCTV equipt.
Transparent to the user.
DC to 8 MHz.
1.1Vp-p
Less than 2 dB per pair over the frequency range from DC to 8 MHz
Greater than 15 dB over the frequency range from DC to 8 MHz
Greater than 40 dB @ 8 MHz
Cat 3 –1,200 ft (365m); Cat 5 – 2,200 ft. (670m)*
*Shorter distances will result with DVR equipment. Typically 1,000 to 1,500 ft
Cat 3 –1,500 ft (457m); Cat 5 – 2,500 ft (762m)
Two (2) Three (3)
5 VA: 350 ft (107m) 10 vA: 175 ft (53m)
20 VA: 90 ft (30m) 30 vA: 60 ft (20m)
50 Volts (AC RMS/DC). Recommended Class II PSU with fuse protection per port
4.5A (AC RMS/DC)
Remote 2-wire PTZ control supported via one (1) twisted pair.
Up to 4,000 ft (1.2 km) depending on the PTZ camera vendor**
**Please consult your CCTV equipment vendor for more detailed performance specifications.
50 Volts (AC RMS/DC); 3A (AC RMS/DC)
24 AWG or lower solid copper twisted pair wire impedance: 100 ohms at 1 MHz
Maximum capacitance: 20 pf/foot. Attenuation: 6.6 dB/1000 ft at 1 MHz
Impedance: 75 Ω at 1 MHz. (RG59/U). Max. 25 ft. of coax allowed end to end.
Video: Sixteen (16) BNC-F (500130), Sixteen (16) 2-pole screw terminals (500131)
Power: Sixteen (16) 2-pole screw terminals Control: Sixteen (16) 2-pole screw
terminals. Combined signals: Sixteen (16) RJ45 jacks
Sets each port as Pass-Thru (500022) or as Power-Thru (500024/500029)
l
Power B (-) 2, 6 2, 4, 6
Control (+) 4 Not used
Control (-) 5 Not used
Video BNC Center (Tip) 7 [T] opposite to 500000 7 [T] opposite to 500000
Video BNC Ground (Ring) 8 [R] opposite to 500000 8 [R] opposite to 500000
Operating: 0° to 55°C. Storage:-20° to 85°C. Humidity: up to 95%
Black, anodized aluminum
19” (48.26 cm) W x 1.75” (4.4 cm) H x 1.5” ( 5.1 cm) D
2.3 lbs. (1.1kgs)
Lifetime
500130 Passive CCTV Hub, UTP/Coax ; 500131 Passive CCTV Hub, UTP/UTP
Features/Benefits
Port switch to set Power-Thru or Pass-Thru mode
Pin configuration table on unit
Space efficient, rackmountable
5 VA: 518 ft (170m) 10 VA: 259 ft (85 m)
20 VA: 130 ft (43 m) 30 VA: 86 ft (28 m)
22 M
VideoEase Passive CCTV Hub
500130, 500131
_____________________________________________________________________________________
Typical Application
© MuxLab Inc. 2005 VideoEase Passive CCTV Hub
Head Office
8114 Trans Canada Hwy, Ville St. Laurent, Quebec, H4S 1M5
Internet:www.muxlab.com
E-mail: videoease@muxlab.com
Loading...