MuxLab 500086 Datasheet

Overview:

Features:

Environment

Digital Audio

Standard Supported

LPCM, Dolby Digital® 5.1, DTS, and Dolby® True HD

Input / Output signal

S/PDIF coax cable or TOSLINK optic cable, input selectable.

Sampling rate

Up to 96kHz/24bits

Maximum distance between unit

500 ft. (150m)

Connectors

RCA, TOSLINK, POWER, RJ45 on each unit.

Power requirement

1W max, 5V DC

S/PDIF spec

Coax 75 ohm with RCA connector,
level: 500mVp-p into 75 ohm

TOSLINK spec

Plastic optic cable with EIAJ/JEITA RC-5720C connector,
Wavelength: red 660nm, level: -15dBm max.

Cabling Requirement
(not supplied)

Any 4-pair straight cable CAT5/5E/6 with RJ-45 connector.
Coax and second Optic Cable.

Included in this kit

1 x TX unit, 1 x RX unit, 1 x 5V Power supply,
1 x Optic Cable 3ft (1m) and 1 x Installation guide.

RJ45 Pin Configuration

Pair 4+5 (data), 1+2+7(+5V), 3+6+8(0V)

Compatible mounting hardware

500902, 500900, 500910, 500915

Temperature

Operating: -40° to 85°C (-40° to 185°F)
Storage: -40° to 85°C (-40° to 185°F)

Humidity

Maximum 95% (non-condensing)

Enclosure

ABS UL94HB fire retardant plastic

Dimensions

2.25” x 2.25” x 1.0” (6 x 6 x 2.5 cm) each box.

Shipping Weight

1 lb. (450g)

Warranty

2 Years

Order Information

500086 Digital Audio Extender (UPC: 627699000861)

The Digital Audio Extender allows one (1)
source of digital audio signal: coax (S/PDIF) or
optic (TOSLINK) to be connected to a receiver:
coax or optic to up to 500 ft. (150m) in a point­to-point configuration. The Extender supports
most standards to transmit two channels of
uncompressed lossless PCM audio or
compressed 5.1/7.1 surround sound, such as
Dolby Digital Plus or DTS-HD High Resolution
Audio (multichannel digital audio Dolby Digital®

5.1, DTS, and Dolby® True HD).
Applications: Transmission of Digital Audio

Signals
Home theatre, Digital signage, rental and
staging.

Digital Audio Extender

500086

• Extend digital audio fiber optic link (TOSLINK)
or digital audio electrical link (COAX) to 500ft
(150M) over UTP cable

• Can be used to convert optical link (TOSLINK)
to electric link (COAX) or reverse

• Power only needed on one side as other side
is powered by PoL

© MuxLab Inc. 2015 500086

Product Photos:

Typical Application:

Digital Audio Extender

500086

© MuxLab Inc. 2015 500086

MuxLab Inc. | 8495 Dalton Road, Mount Royal, Quebec, Canada, H4T 1V5

Tel: [phone] | Fax: [phone] | Toll Free:1 877 689-5228

E-mail: [e-mail] | www.muxlab.com