MuxLab 500025, 500026 Specsheet
Overview
The MonoPro™ XLR (500025, 500026) allows a
standard AES analog or digital audio channel to
be connected via Cat5e/6 unshielded twisted pair
cable (UTP) for the professional audio
environment.
The product features heavy duty cable strain
relief for rugged environments such as rental and
staging and is available with male or female
locking XLR3 connectors for added cabling
versatility. May also be used as a solderless
connection point for standard shielded audio
cable.
Benefits
Cost efficient cabling via UTP
Robust design for professional use
Specifications Analog Audio Digital Audio
Environment
Signal Amplitude
Polariy Sensitive
Impedance
Signal type
Maximum Distance via Cat5e/6
UTP
Frequency response
Pro Audio Devices
Transmission
Insertion Loss (per balun pair)
Return Loss
Common Mode Rejection (CMMR)
Cable – UTP
Connectors
Pin Configuration
Cable Strain Relief
Temperature
Enclosure
Dimensions
Weight
Standards
Regulatory
Warranty
Order Information
Balanced line level or
microphone analog audio
2.3 Vp-p 2 – 7Vp-p
Phase polarity sensitive Not polarity sensitive
Output: 600 Ω Input: 600-20kΩ 110 Ω
Professional balanced analog line
level or microphone
Line level: 5,000 ft (1.5 km)
Mic level: 3,000 ft (914m)
Active microphone supported. Requires
ground pin connected at both ends.
Distance unspecified.
DC to 6 MHz
mixers, routers, switchers, format converters, splitters, distribution amplifiers,
boosters, receivers, encoders, CD players, DAT recorders, microphone preamps, compressors, passive microphones, equalisers, active loudspeakers,
public address systems, rental and staging equipment.
Transparent to the user.
Less than 1 dB /pair from DC to 6 MHz
Less than 15dB from DC to 6 MHz
Greater than 45 dB
24 gauge or lower solid copper twisted pair wire impedance: 100 Ω at 1 MHz.
Maximum capacitance: 20 pf/foot. Attenuation: 6.6 dB/1000 ft at 1 MHz
XLR3-M or XLR3-F depending on model
Two (2) screw terminals for signal
One (1) screw terminal for optional shield (ground)
XLR3 Signal UTP
Pin 1 Shield Gnd (optional)
Pin 2 Positive Tip [T]
Pin 3 Return Ring [R]
Threaded and tapered cable grip mechanism.
Operating: 0° to 55° C. Storage:-20° to 85°C. Humidity: 95% non-condensing
Fire retardant plastic. UL94-V0
1.875” x 1” diam (4.76 cm x 2.54 cm diam) plus 5” (12.7cm) XLR3 lead
2.64 oz (75 gms)
AES/EBU 1982, AES-1992, ANSI S.40-1992, IEC-958
FCC, CE.
Lifetime
500025 MonoPro XLR, XLR3-M
500026 MonoPro XLR, XLR3-F
Features
Line analog audio up to 5,000 ft (1.5km) via Cat 5
Digital audio up to 1,400 ft (426m) via Cat5e/6
UTP
Wires terminate inside balun
Locking XLR3 connector
Heavy-duty cable strain relief
Supports UTP or STP
Balanced line level digital audio
Professional balanced digital line level
Sampling Rate Distance
32 kHz 1,400ft (426m)
44.1 kHz 1,300ft (396m)
48 kHz 1,250ft (381m)
96 kHz unspecified
MonoPro™ XLR
500025, 500026
©MuxLab 2004-2009 MonoPro XLR
MonoPro XLR
500025, 500026
_____________________________________________________________________________________
Typical Application
©MuxLab 2004-2009 MonoPro XLR
Head Office
8495 Dalton Road, Mount Royal, Quebec, Canada, H4T 1V5
Tel: 514-905-0588 Fax: 514-905-0589
Toll-free: 877-689-5228
E-mail: videoease@muxlab.com
URL: www.muxlab.com
Loading...