CCTV Pass-Thru Balun
500022
_____________________________________________________________________________________
Overview
The CCTV Pass-Thru Balun (500022) allows video,
remote power and 2-wire PTZ control signals to be
transmitted via one 4-pair Cat5e/6 cable, thus
eliminating the need to install multiple cables for more
efficient cabling. The CCTV Pass-Thru Balun may be
used in pairs or in conjunction with MuxLab’s Passive
CCTV Hub (500130).
Specifications
Environment
Devices
Baseband video; NTSC, PAL, SECAM
Close-circuit TV (CCTV) cameras , monitors, switchers, IP encoders, digital video
recorders (DVR) and other CCTV equipment.
Transmission
Transparent to the user.
Video
Bandwidth
Impedance
Maximum Input
Insertion Loss
Return Loss
Common Mode Rejection
Max. Distance - Colour
Max. Distance - Black & White
DC to 8 MHz.
Input: 75 ohms (BNC); Output: 100 ohms (RJ45)
1.1Vp-p
Less than 2 dB per pair over the frequency range from DC to 8 MHz
Greater than 15 dB over the frequency range from DC to 8 MHz
Greater than 40 dB @ 8 MHz
Cat 3 –1,200 ft (365m); Cat 5 – 2,200 ft. (670m)*
*Certain models of DVR may yield shorter distances of 1,000 to 1,500 ft
Cat 3 –1,500 ft (457m); Cat 5 – 2,500 ft (762m)
Remote Power (ie; 24 VAC, 28 VAC)
Wiring
Remote low voltage power supported via two (2) twisted pairs. A Class II power
supply is recommended.
Max. Distance @ 24VAC via two
twisted pairs*
*Longer distances may be achieved
@ 28 VAC.
5 vA: 350 ft (107m)* 10 vA: 175 ft (53m)*
20 vA: 90 ft (30m)* 30 vA: 60 ft (20m)*
*Based on 10% voltage drop at camera. Please consult y our CCTV equipment vendor for more
detailed performance specifications.
2-Wire PTZ Control (i.e. RS-422, Manchester/Bi-Phase, half duplex RS485)
Wiring
Maximum Distance
Maximum Input Voltage
Maximum Current Rating
Remote 2-wire PTZ control supported via one (1) twisted pair.
Up to 4,000 ft (1.2 km) depending on the PTZ camera vendor**
**Please consult your CCTV equipment vendor for more detailed performance specifications.
50 Volts (AC RMS/DC)
3A (AC RMS/DC)
Mechanical & Environmental
Cable – UTP
24 gauge or lower solid copper twisted pair wire impedance: 100 ohms at 1 MHz
Maximum capacitance: 20 pf/foot. Attenuation: 6.6 dB/1000 ft at 1 MHz
Cable – Coax
Connectors
Impedance: 75 Ω at 1 MHz. (RG59/U). Max. 25 ft. of coax allowed end to end.
Combined signals: RJ45 Video: BNC-male 8” mini-coax lead
Power: 2-wire 18AWG lead Control: 2-wire 24AWG twisted pair lead
Pin Configuration*
*Reverse polarity sensitive
Temperature
Enclosure
Dimensions
Signal RJ45 Pin Cable Lead Color
Power A 1 (common with 3) Red
Power B 2 (common with 6) Black
Power A 3 (common with 1) Red
Control + 4 Blue solid/White band*
Control - 5 White solid/Blue band*
Power B 6 (common with 2) Black
Video BNC Center (Tip) 7 [T] opposite to 500000 Mini-coax
Video BNC Ground (Ring) 8 [R] opposite to 500000 Mini-coax
Operating: 0° to 55°C. Storage:-20° to 85°C. Humidity: up to 95%
ABS fire retardant plastic
1.875” (4.7cm)x 1.0” (2.54cm) diameter plus cable leads; 8” (20cm) for video; 10”
(25.4cm) for power and control leads
Weight
Warranty
Order Information
© MuxLab Inc. 2004-2009 CCTV Pass-Thru Balun
1.95 oz (55 gms)
Lifetime
500022 CCTV Pass-Thru Balun
Features/Benefits
Combines video, power and PTZ control under one 4pair Cat5e/6 cable for more efficient cabling
Video up to 2,200 ft (670m) via Cat 5 UTP*
Compact - fits inside dome cameras, back boxes.
* Shorter distances may result with certain models of DVR.
CCTV Pass-Thru Balun
_____________________________________________________________________________________
Typical Applications
500022
© MuxLab Inc. 2004-200 CCTV Pass-Thru Balun
8495 Dalton Road, Mount Royal, Quebec, Canada, H4T 1V5
Tel: 514-905-0588 Fax: 514-905-0589
Toll-free: 877-689-5228
E-mail: videoease@muxlab.com URL: www.muxlab.com