Mutant Harmony MTHA4, Harmony MTHA69, Harmony MTHA5, Harmony MTHA6 User Manual
For more information about car audio visit our website at
is a brand name of Armour Automotive Ltd.
For more information about car audio visit our website at
is a brand name of Armour Automotive Ltd.
Mutant – The New Species
Harmony Speakers
Features
Installation
Wiring Diagram
Speaker Dimensions
Tweeter & Crossover Dimensions
Grille Dimensions
Trouble Shooting
Thiele Parameters
Warranty
For more information about car audio visit our website at
is a brand name of Armour Automotive Ltd.
WARNING! Audio Systems can produce sound levels over 135dB.
Continuous exposure to sound pressure levels over 100dB may cause
permanent hearing damage.
When driving, please be vigilant for emergency vehicles as warning sirens
may not be heard.
Please remember to respect local regulations :
Hand in non-working electrical equipment to an appropriate waste disposal
centre.
PUBLISHED BY ARMOUR AUTOMOTIVE LTD.
© Copyright 2009 by Armour Automotive Ltd. All rights reserved.
Specif ications and design are subject to change without notice.
speakers are the latest creation from the
labs.
Mutant’s new Harmony speakers have been designed to provide stunning
audio reproduction and drop dead gorgeous looks at an affordable price.
Stunning Gloss black cones with Rose Gold accents mean that you can at last
be proud to show off your speakers without having to break the bank.
Since its awakening back in 2004, Car Audio has been
continuously developing and creating ICE to cater for the markets ever
changing needs, with the newly acquainted Harmony range leading the way!
Ever striving to offer a collection of products to suit all desires and budgets,
Harmony speakers are Audio at its’ symphonic best.
Please read the following installation instructions to ensure the correct
operation of your speakers for many years to come.
Regards
The Mutant Crew
For more information about car audio visit our website at
is a brand name of Armour Automotive Ltd.
For more information about car audio visit our website at
is a brand name of Armour Automotive Ltd.
new Harmony speakers have been designed to provide stunning
audio reproduction and drop dead gorgeous looks at an affordable price.
Stunning Gloss black cones with Rose Gold accents mean that you can at last
be proud to show off your speakers without having to break the bank.
With High Gloss PU surround to compliment the rose gold tweeter housing
and detailing and give superior cone control and linear travel for improved
clarit y.
Providing a solid mounting for the motor structure to ensure clean, tight
midbass.
Giving superb high end delity without distortion right up to 20K. This means
less listening fatigue at higher levels and for a longer period of time.
On component woofers to reduce phase cancellation and create a more
powerful mid bass region.
Swivel mount tweeter in component set to enable the perfect tweeter
adjustment to suit your vehicle. The 3 way selectable mounting of component
tweeter allows for Custom or factory tted integration, and the dual
Concentric Tweeter Mounting on Coaxial Versions gives more focussed sound
source and better imaging.
Improves excursion linearity and power handling
For more information about car audio visit our website at
is a brand name of Armour Automotive Ltd.
Before starting the installation, you should decide the location for all
components of the speaker system.
This can be the door of the vehicle, the dashboard or rear parcel shelf. You
may also choose to make custom mounts for the speakers as the best results
can often be obtained by using MDF bafe rings.
The woofer can be used with or without the grill which allows you to mount
it in the factory locations where compatible. If you are custom mounting the
woofer you should use the supplied grill to protect the cone from damage.
Please ensure that wherever you choose to mount the woofer you have
adequate clearance at the rear and that it does not foul any mechanism for
the window or central locking motor. Also please ensure that if it is being
mounted in a door that the window will move freely up and down to its fullest
extent.
When you have chosen your mounting location you will need to cut out a hole
with either a jigsaw or a router. The cutout size for the 4” is 95mm for the
5.25” it is 113mm and for the 6.5” it is 146mm.
Once the hole is cut please trial t the woofer to ensure clearance at the rear
and also at this time you can mark the holes for the screws.
Remove the woofer and drill out the mounting screw holes.
You can then mount the woofer and grill assembly and secure it complete with
the supplied screws.
The tweeter comes supplied with two different housing which allow you to
mount it in a wide variety of locations.
Using the ush mount housing will allow you to mount the tweeter ush to
either the door panel or other at surface.
Once you have chosen your mounting location for the tweeter you should
again check for clearance at the rear of the panel to allow the tweeter to sit
ush.
Loading...