Mustcam H806P Quick Start Manual

IP Camera

Quick Start Guide

====================

H Series V2.0

iOS Android

1

．

Package Contents

5V Power Adaptor

Bracket and Screws

Wi-Fi Antenna

Network Cable (optional)

CD

Quick Start Guide

2

．

Install the IP Camera

Make sure that Internet is accessible for the IP Camera.

As the above illustration shows, connect the IP Camera with router by net cable,

power the IP Camera and then it will get ready for working after around 1 minute.

The camera will initialize itself by rotating its pan for one round. When it is ready,

the green LED of the net port will be on and the yellow LED will be flashing (if the

LEDs are off, that means the Internet access failed).

3

．

Access the Camera by Smart Phone

You can access the Camera by Smart Phone with iOS or Android system. The

following takes iOS as an example to guide the operation. The operation of

Android is almost the same as that of iOS.

1) Download App

Android: Install NetCam.apk from the CD, or search and download from

play.google.com.

iOS：Download from App Store NetCam

2) After installed, the software icon is as follows. Click to start it.

3) Click Add Camera. There are 3 ways to add a camera.

(1) LAN Search：It is recommended using this way.

(2) Scan QSR code：You need to install a scanning tool

(3) Input P2P ID