Mustang 13322, 13318 User Manual

Expandable Throw-Over
Saddlebags

(Fits Most Models)

Parts Included:
1 Right Saddlebag, 1 Left Saddlebag

4 Adjustable Straps with Hooks
1 Installation Instructions

In order to protect you and others from possible injury and/or property damage or loss,
please carefully read all instructions, warnings and attention notes regarding the use
and care of this product.

ATTENTION: IGNORING WARNING NOTES DESCRIBED HEREIN CAN RESULT IN POTENTIAL

DEATH, SERIOUS INJURY OR MATERIAL DAMAGE AND MAY NEGATIVELY AFFECT
PRODUCT PERFORMANCE AND FUNCTIONALITY.

CAUTION: The saddlebags have heat-resistant shields but we do not recommend
placing the bags near exhaust pipes. Be sure to maintain proper clearance away from
exhaust pipes.

13322 Studded
13318 No Studs

2 Rain Covers
2 Hook and Loop Straps
1 Cable Lock

Strictly observe the following guidelines in order to use the product properly
and avoid potentially dangerous accidents.

RETRACTABLE CABLE LOCK
STEP 1 See PIC. 5. To select a new combination for the lock,

press button “A” and hold down. Push the cable end (labeled
as “B”) down/inward until you hear it click.

STEP 2 Choose your new combination by turning the three
tumblers (labeled as “C”) to a three-digit combination that you
will remember. Then pull back up on the cable end to set your
combination.

STEP 3 Press down the “A” button to pull the cable end out. Plug the cable end into the
cable lock receptacle (labeled as “D”) until you hear it click into the locked position. If you
have too much slack in the cable, press the “A” button to recoil the slack amount of cable.
Turn tumblers to a position that is NOT your chosen combination to lock the mechanism.

STEP 4 To unlock, turn the tumblers to your chosen combination and press
the “E” button to release the cable and the “A” button to recoil the cable.

PIC. 5

- Continued -

Expandable Throw-Over Saddlebags Installation Continued, page 2

WARNING: Prevent serious injuries and/or death! Be sure all

fasteners are secure before riding. Never exceed the manufacturer’s
recommended loading limits for your motorcycle! BE SURE THE
SADDLEBAGS DO NOT COME INTO CONTACT WITH ANY MOVING
PARTS. ALWAYS CHECK FOR PROPER CLEARANCE BEFORE RIDING!

PROCEDURE

STEP 1 Read and understand all steps in the instructions before

starting the installation. Park motorcycle on a hard, level surface;
turn off the ignition and allow the engine to cool.

STEP 2 The saddlebags t either over or under the passenger seat
(see PIC.1 and PIC.2.) The saddlebags can be positioned with
the narrow wedge end facing either forward or backward,
depending on the best t for your application.

STEP 3 The width between the tops of the saddlebags is
adjustable, allowing the bags to t many applications, see PIC.3.
Separate the Velcro aps and reposition to adjust the width. Be
sure that the width between the saddlebags is not so loose that
a saddlebag could get caught under the fender or in the wheel.

PIC. 3

STEP 4 The saddlebags are equipped with multiple steel D-rings

allowing you to get the best t for your application. Slide the steel
D-rings into the elastic pockets when not in use to eliminate

PIC. 4

rattling due to vibration, see PIC.3. Mustang recommends
securing the saddlebag to the passenger footpeg or the frame.
DO NOT secure saddlebags to the swingarm or any part that
moves independently from the seat. Before riding, be sure the
straps will not tangle in any moving parts.

STEP 5 Slide the cable lock through the D-rings to secure
the saddlebags to your motorcycle, see PIC.4.

WARNING: After installing the saddlebags, be sure to check for proper clearance between
the bag and any moving parts, including the wheels and swing arm. Never place anchoring
straps near the wheels or brake calipers. Be sure the placement of the saddlebags does not
interfere with safe operation of the motorcycle.

WARRANTY: All Mustang seats and accessories have a one-year warranty against defects in material and workmanship. Your warranty

is automatically activated on date of purchase. If a product appears defective, call Mustang to obtain a Return Merchandise Authorization
form (RMA). All returns must be carefully packed to avoid shipping damage; you are responsible for return shipping charges. Mustang will,
at their discretion, repair or replace the defective portion of the seat or accessory and return it to you freight paid. Incidental or consequen­tial damages or labor charges arising from or in connection with installation or use of a Mustang product are not covered by this warranty.

These steps are guidelines to help you install your new Mustang product. If you need further assistance,
please call us at
email

[e-mail] or visit www.mustangseats.com

860-582-9633 or 800-243-1392 Monday through Friday 9:00 - 5:30 Eastern or