Mussel HPS 750 M 180 T, HPS 1000 M 180 T Operating Instructions Manual

Operating Instructions

Heating Press for Bonding Splices

HPS 750 M 180 T

HPS 1000 M 180 T

Müssel Maschinenbau GmbH

Reichelsweiherstraße 8

95615 Marktredwitz

GERMANY

Tel.: [phone]

Fax: [phone]

E-Mail: [e-mail]

Operating instruction: C032 / 0842 / 0844 Edition: 01/2015 1 Subject to alterations.

Introduction

We would like to congratulate you for having purchased the Müssel-Belting Tools made by Müssel
Maschinenbau GmbH and to thank you for the confidence you placed in us.

This operating instruction provides you with important information for the proper and safe use of the heating
press, HPS 750 M 180 T, HPS 1000 M 180 T.

Owing to our experience over decades in the development and the fabrication of finishing tools for conveyor
belts and driving belts, these devices have been designed according to the latest state of technique and in
compliance with this application
in the detailed splicing instructions or in the belt specific technical data sheets of the belt manufacturer.

Please note that the future usage conditions of the conveyor belt have to be considered for the choice and
the finishing of splices.

The reproduction, distribution and utilization of this document as well as the communication of its contents
to others without expressed authorization is prohibited as far as this is not explicitly allowed by Müssel
Maschinenbau GmbH. Offenders will be held liable for the payment of damages. All rights reserved.

Any liability for errors and printing errors is excluded.

.

Please find further information on splicing types and finishing parameters

Operating instruction: C032 / 0842 / 0844 Edition: 01/2015 2 Subject to alterations.

Contents

1 General Information

1.1 Name and address of the manufacturer

1.2 Identification of the device

1.3 CE-Declaration

1.4 Conformity

2 General Safety Instructions

2.1 Basics

2.2 Organisational measures

2.3 Personnel selection and qualification

2.4 Safety instructions for specific operating phases

2.5 Mobile devices

2.6 Safety instructions

3 Product Description

3.1 Components and proper usage

3.2 How it works

3.3 Technical data

3.4 Wiring diagram

3.5 Accessories

4 Preparing the product for usage

4.1 Transport

4.2 Position

4.3 Electric installations

4.4 Utilities

4.5 Thermostat

4.6 Thermometer

5 Handling

5.1 General

5.2 Heating up the top part of the press (heating plate)

5.3 Inserting the ends of the splice in the heating press

5.4 Coating the ends of the splice

5.5 Closing the heating press

5.6 Heating the splice

5.7 Connecting the water cooling system and cooling the splice

6 Maintenance work

6.1 Spare parts

6.2 Wear parts

7 Disassembling and Disposal

Operating instruction: C032 / 0842 / 0844 Edition: 01/2015 3 Subject to alterations.

Operating instruction: C032 / 0842 / 0844 Edition: 01/2015 4 Subject to alterations.

1 General Information

1.1 Name and address of the manufacturer

Müssel Maschinenbau GmbH
Reichelsweiherstraße 8
95615 Marktredwitz
GERMANY

1.2 Identification of the device

Product designation: Heating press for bonding splices
Serial/Type designation: HPS 750 M 180 T. HPS 1000 M 180 T
Serial number: see type label
Year of construction: see type label

1.3 CE-Declaration

see fixed label

Operating instruction: C032 / 0842 / 0844 Edition: 01/2015 5 Subject to alterations.

1.4 Conformity

Operating instruction: C032 / 0842 / 0844 Edition: 01/2015 6 Subject to alterations.