musikelectronic geithain rl906 Instruction Manual

musikelectronic geithain

Studio Loudspeaker

RL 906

Instruction Manual

Introduktion

Dear customer,

congratulations with the purchase of our active loudspeaker system.

The RL906 loudspeaker is equipped with a 125-mm cone woofer and a
coaxially positioned 25-mm tweeter callote.
The basic principals of all RL-series active loudspeakers are the active multi­way technology with integrated analogue crossovers and power amplifiers, as
well as the implementation of our special coaxial technology. The result are
loudspeakers which are unparalleled with respect to focus accuracy, depth
perspective and distortion characteristics. Audio-physiological aspects were
crucial for optimising the directivity index. The active loudspeaker is
magnetically shielded; this allows a position close to a TV set.
Our active loudspeaker system can be connected to any pre-amplifier
(U >1 volts R < 600 ohms).

Please carefully attend to the safety instructions!

This product complies with the requirements of the applicable European
and national directives (Electromagnetic Compatibility 89/336/EWG). The
conformity was proven; the respective declarations and documentation
are deposited with the manufacturer.

In order to maintain its excellent condition and to ensure a safe operation,
please carefully read and attend to this instruction manual.

Included in Delivery

Speaker
Line Cord
Instruction Manual

Safety Instructions

As with other electrical equipment, you must attend to the following basic
operational and safety instructions, as well as to warning notices, in order to
ensure optimal functionality and operational safety of the system!

� For safety reasons, unauthorized alterations and/or modifictions of the system are

not allowed.

� Keep children away from electrical equipment.
� The device must only be operated with the mains voltage indicated on the reverse

side.

� If the device is installed into a shelf, rack or wall cupboard, please ensure sufficient air

circulation.

� Do not Never insert any objects into device openings.
� Do not allow any liquids to get inside the unit.
� Danger of electric shock if cabinet is opened.
� Repairs must be carried out by qualified personnel only.
� For cleaning, please use a damp cloth only.
� Do not use flue gas scrubber or spray cleaners.

Unpacking

The loudspeaker has been delivered in a sound condition. Carefully unpack the
loudspeaker and check it for visible damages. Please contact your dealer immediately
in case of damage. Please keep the packaging for possible future transports of the
loudspeaker.

Cleaning

The loudspeaker surface is of wood veneer and should be treated similar to furniture.
We recommend using a quality wax polish for protecting the veneer and keeping it
glossy. You can also use a clean damp, soft and lint-free cloth for cleaning the
surfaces.

Installation

Please do not expose the loudspeaker to direct solar irradiation. Neither set up the
loudspeaker in rooms with high air humidity.

Warranty notes

Any warranty claims expire, if the device has been opened by un-authorized
personnel. No warranty exists if the device is destroyed due to overload, improper
manipulation or extraneous cause.