MUSIC Tribe PH ULM100M, ULM100R User Manual

ULTRALINK ULM100USB

High-Performance 2.4 GHz Digital Wireless
Microphone with USB Receiver

ULM100USB Hook-Up

XENYX QX2442USB

B115MP3

Laptop

ULM100USB Controls

Model: ULM100M

Model: ULM100R

(1)

(5)(4)

(2) (3)

Type of product: Wireless Microphone

ULM100USB Controls

1. POWER/ STATUS LED

2. W VOLUME Button (Mute/volume down)

3. V VOLUME Button (Power on/volume up)

4. USB connector

5. Wireless Link Status LED

ULM100USB Getting Started

1. Press the V button to power on the ULM100M
wirelessmicrophone.

2. Connect the ULM100R wireless receiver to the wireless
only USB connector on the wireless enabled device or to
a USB port on a computer. The ULM100M will sync to the
receiver automatically.

3. Use the W and V buttons on the ULM100M wireless
mic to adjust the volume.

4. Press and hold the W button to mute the volume of
theULM100M.

5. Press the V button to un-mute the volume of
theULM100M.

6. Disconnect the ULM100R wireless receiver. The ULM100M
wireless microphone will power o when no wireless
signal is detected for more than 1 minute.

Specication

RF output +17 dBm (50 mW)

Working range 120 m Maximum

(Lineof Sight)

Dynamic range > 67 dB

Frequency response 20 Hz – 14.7 kHz
(Wireless Link) (+0 / -0.3 dB)

THD+N (%) (Wireless Link) > 65 dB (0.03%)

Sampling rate 31.25 kHz

Audio coding Pulse-coded

modulation (PCM)

RF channel 2.4 GHz ISM Band

(2417 - 2471 MHz),
19Channels

Latency 9 ms

Power supply current 160 mA @ +2.7 VDC,
(Microphone) 140 mA @ +3.0 VDC

Power supply current 100 mA @ +5 VDC
(USB receiver)

Dimensions (W x D x H) 1.8 x 1.8 x 9.6"

45 x 45 x 245 mm

Weight 0.4 lbs / 0.2 kg