MUSIC Tribe PH CPAXX02 User Manual

Quick Start Guide

CPA

Series

CPA1202/CPA2402

120/240/2 x 120/2 x 240 Watt Commercial Mixer Amplier with
5/8 Inputs, Bluetooth* Streaming, USB Media Player

A54-00001-76775

2 CPA Series Quick Start Guide 3

9. No elimine o deshabilite nunca la conexión a tierra

18. No instale esta unidad en un espacio muy reducido,

9. Do not defeat the safety purpose of the polarized

20. Please keep the environmental aspects of battery

Important Safety
Instructions

Terminals marked with this symbol carry
electrical current of sucient magnitude

to constitute risk of electric shock.
Use only high-quality professional speaker cables with
¼" TS or twist-locking plugs pre-installed. Allother
installation or modication should be performed only
by qualiedpersonnel.

This symbol, wherever it appears,

alertsyou to the presence of uninsulated

dangerous voltage inside the
enclosure-voltage that may be sucient to constitute a
risk ofshock.

This symbol, wherever it appears,

alertsyou to important operating and

maintenance instructions in the
accompanying literature. Please read the manual.

Caution

To reduce the risk of electric shock, donot

remove the top cover (or the rear section).
No user serviceable parts inside. Refer servicing to
qualied personnel.

Caution

To reduce the risk of re or electric shock,

do not expose this appliance to rain and
moisture. The apparatus shall not be exposed to dripping
or splashing liquids and no objects lled with liquids,
suchas vases, shall be placed on the apparatus.

Caution

These service instructions are for use

by qualied service personnel only.
Toreduce the risk of electric shock do not per form any
servicing other than that contained in the operation
instructions. Repairs have to be performed by qualied
servicepersonnel.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including ampliers) that produce heat.

or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding-type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. Ifthe
provided plug does not t into your outlet, consult an
electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.

11. Use only attachments/accessories specied by
themanufacturer.

12. Use only with the
cart, stand, tripod, bracket,
or table specied by the
manufacturer, orsold with
the apparatus. When a cart
is used, use caution when
moving the cart/apparatus
combination to avoid

injury from tip-over.

13. Unplug this apparatus during lightning storms or
when unused for long periods of time.

14. Refer all servicing to qualied service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or has
beendropped.

15. The apparatus shall be connected to a MAINS socket
outlet with a protective earthing connection.

16. Where the MAINS plug or an appliance coupler is
used as the disconnect device, the disconnect device shall
remain readily operable.

17. Correct disposal of this
product: This symbol indicates that
this product must not be disposed
of with household waste,
according to the WEEE Directive
(2012/19/EU) and your national

law. This product should be taken
to a collection center licensed for the recycling of waste
electrical and electronic equipment (EEE). The
mishandling of this type of waste could have a possible
negative impact on the environment and human health
due to potentially hazardous substances that are generally
associated with EEE. At the same time, your cooperation
in the correct disposal of this product will contribute to
the ecient use of natural resources. For more
information about where you can take your waste
equipment for recycling, please contact your local city
oce, or your household waste collection service.

18. Do not install in a conned space, such as a book
case or similar unit.

19. Do not place naked ame sources, such as lighted
candles, on the apparatus.

disposal in mind. Batteries must be disposed-of at a
battery collection point.

21. Use this apparatus in tropical and/or
moderate climates.

WARNING

Please refer to the information on the

exterior of bottom enclosure for electrical
and safety information before installing or operating
the device.

LEGAL DISCLAIMER

Music Tribe accepts no liability for any loss which
may be suered by any person who relies either
wholly or in part upon any description, photograph,
or statement contained herein. Technical specications,
appearances and other information are subject to
change without notice. All trademarks are the property
of their respective owners. Midas, Klark Teknik,
Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic,
TC Helicon, Behringer, Bugera, Auratone and Coolaudio
are trademarks or registered trademarks of Music Tribe
Global Brands Ltd. © Music Tribe Global Brands Ltd.
2019 All rights reserved.

LIMITED WARRANTY

For the applicable warranty terms and conditions
and additional information regarding Music Tribe’s
Limited Warranty, please see complete details online at
musictribe.com/warranty.

Zhongshan Eurotec Electronics Limited

No. 10 Wanmei Road, South China Modern Chinese
Medicine Park, Nanlang Town, 528451, Zhongshan City,
Guangdong Province, China

Operating temperature: 0°C ~ 40°C

Instrucciones de
seguridad

Las terminales marcadas con este símbolo
transportan corriente eléctrica de

magnitud suciente como para constituir
un riesgo de descarga eléctrica. Utilice solo cables de
altavoz profesionales y de alta calidad con conectores
TS de 6,3 mm o de bayoneta prejados. Cualquier otra
instalación o modicación debe ser realizada únicamente
por un técnico cualicado.

Este símbolo, siempre que aparece,

leadvierte de la presencia de voltaje

peligroso sin aislar dentro de la caja;
estevoltaje puede ser suciente para constituir un riesgo
dedescarga.

Este símbolo, siempre que aparece,

leadvierte sobre instrucciones operativas

y de mantenimiento que aparecen en la
documentación adjunta. Por favor, lea el manual.

Atención

Para reducir el riesgo de descarga

eléctrica, no quite la tapa (o la parte
posterior). No hay piezas en el interior del equipo que
puedan ser reparadas por el usuario. Si es necesario,
póngase en contacto con personal cualicado.

Atención

Para reducir el riesgo de incendio o

descarga eléctrica, no exponga este
aparato a la lluvia, humedad o alguna otra fuente que
pueda salpicar o derramar algún líquido sobre el aparato.
Nocoloque ningún tipo de recipiente para líquidos sobre
el aparato.

Atención

Las instrucciones de servicio deben

llevarlas a cabo exclusivamente personal
cualicado. Para evitar el riesgo de una descarga eléctrica,
no realice reparaciones que no se encuentren descritas
en el manual de operaciones. Lasreparaciones deben ser
realizadas exclusivamente por personalcualicado.

1. Lea las instrucciones.

2. Conserve estas instrucciones.

3. Preste atención a todas las advertencias.

4. Siga todas las instrucciones.

5. No use este aparato cerca del agua.

6. Limpie este aparato con un paño seco.

7. No bloquee las aberturas de ventilación. Instale el

equipo de acuerdo con las instrucciones del fabricante.

8. No instale este equipo cerca de fuentes de calor
tales como radiadores, acumuladores de calor, estufas u
otros aparatos (incluyendo amplicadores) que puedan
producir calor.

del aparato o del cable de alimentación de corriente.
Unenchufe polarizado tiene dos polos, uno de los cuales
tiene un contacto más ancho que el otro. Una clavija con
puesta a tierra dispone de tres contactos: dos polos y la
puesta a tierra. El contacto ancho y el tercer contacto,
respectivamente, son los que garantizan una mayor
seguridad. Si el enchufe suministrado con el equipo no
concuerda con la toma de corriente, consulte con un
electricista para cambiar la toma de corriente obsoleta.

10. Coloque el cable de suministro de energía de manera
que no pueda ser pisado y que esté protegido de objetos
alados. Asegúrese de que el cable de suministro de
energía esté protegido, especialmente en la zona de la
clavija y en el punto donde sale del aparato.

11. Use únicamente los dispositivos o accesorios
especicados por el fabricante.

12. Use únicamente la
carretilla, plataforma,
trípode, soporte o mesa
especicados por el
fabricante o suministrados
junto con el equipo.
Altransportar el equipo,
tenga cuidado para evitar

daños y caídas al tropezar con algún obstáculo.

13. Desenchufe el equipo durante tormentas o si no va a
utilizarlo durante un periodo largo.

14. Confíe las reparaciones únicamente a servicios
técnicos cualicados. La unidad requiere mantenimiento
siempre que haya sufrido algún daño, si el cable de
suministro de energía o el enchufe presentaran daños,
sehubiera derramado un líquido o hubieran caído objetos
dentro del equipo, si el aparato hubiera estado expuesto
a la humedad o la lluvia, si ha dejado de funcionar de
manera normal o si ha sufrido algún golpe o caída.

15. Al conectar la unidad a la toma de corriente eléctrica
asegúrese de que la conexión disponga de una unión
atierra.

16. Si el enchufe o conector de red sirve como único
medio de desconexión, éste debe ser accesiblefácilmente.

17. Cómo debe deshacerse de
este aparato: Este símbolo indica
que este aparato no debe ser
tratado como basura orgánica,
según lo indicado en la Directiva
WEEE (2012/19/EU) y a las

normativas aplicables en su país.
En lugar de ello deberá llevarlo al punto limpio más
cercano para el reciclaje de sus elementos eléctricos/
electrónicos (EEE). Al hacer esto estará ayudando a
prevenir las posibles consecuencias negativas para el
medio ambiente y la salud que podrían ser provocadas por
una gestión inadecuada de este tipo de aparatos. Además,
el reciclaje de materiales ayudará a conservar los recursos
naturales. Para más información acerca del reciclaje de
este aparato, póngase en contacto con el Ayuntamiento
de su ciudad o con el punto limpio local.

tal como encastrada en una librería o similar.

19. No coloque objetos con llama, como una vela
encendida, sobre este aparato.

20. Tenga presentes todas las advertencias relativas
al reciclaje y correcta eliminación de las pilas. Las pilas
deben ser siempre eliminadas en un punto limpio y nunca
con el resto de la basura orgánica.

21. Use este aparato en rangos de temperatura
moderados y/o tropicales.

Precaución

Please refer to the information on the

exterior of bottom enclosure for electrical
and safety information before installing or operating
the device.

NEGACIÓN LEGAL

Music Tribe no admite ningún tipo de responsabilidad
por cualquier daño o pérdida que pudiera sufrir
cualquier persona por conar total o parcialmente en
la descripciones, fotografías o armaciones contenidas
en este documento. Las especicaciones técnicas,
imágenes y otras informaciones contenidas en este
documento están sujetas a modicaciones sin previo
aviso. Todas las marcas comerciales que aparecen
aquí son propiedad de sus respectivos dueños. Midas,
Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound,
TC Electronic, TC Helicon, Behringer, Bugera, Auratone y
Coolaudio son marcas comerciales o marcas registradas
de Music Tribe Global Brands Ltd. © Music Tribe Global
Brands Ltd. 2019 Reservados todos los derechos.

GARANTÍA LIMITADA

Si quiere conocer los detalles y condiciones aplicables
de la garantía así como información adicional sobre la
Garantía limitada de Music Tribe, consulte online toda la
información en la web musictribe.com/warranty.

4 CPA Series Quick Start Guide 5

Erdungskontakt dient Ihrer Sicherheit. Falls das

18. Installieren Sie das Gerät nicht in einer beengten

Fotos oder Aussagen verlassen haben. Technische Daten,

Inhaber. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy,

9. Ne supprimez jamais la sécurité des prises bipolaires

d’équipements pour le recyclage, veuillez contacter votre

Consignes de sécurité

Les points repérés par ce symbole portent
une tension électrique susante pour

constituer un risque d’électrocution.
Utilisez uniquement des câbles d’enceintes professionnels
de haute qualité avec ches Jack mono 6,35 mm ou ches
à verrouillages déjà installées. Touteautre installation ou
modication doit être eectuée uniquement par un
personnel qualié.

Ce symbole avertit de la présence d’une

tension dangereuse et non isolée à

l’intérieur de l’appareil - elle peut
provoquer des chocs électriques.

Attention

Ce symbol signale les consignes

d’utilisation et d’entre ! Tien importantes
dans la documentation fournie. Lisez les consignes de
sécurité du manuel d’utilisation de l’appareil.

Attention

Pour éviter tout risque de choc électrique,

ne pas ouvrir le capot de l’appareil ni
démonter le panneau arrière. L’intérieur de l’appareil
ne possède aucun élément réparable par l’utilisateur.
Laissertoute réparation à un professionnel qualié.

Attention

Pour réduire les risques de feu et de choc

électrique, n’exposez pas cet appareil à la
pluie, à la moisissure, aux gouttes ou aux éclaboussures.
Ne posez pas de récipient contenant un liquide sur
l’appareil (un vase par exemple).

Attention

Ces consignes de sécurité et d’entretien

sont destinées à un personnel qualié.
Pouréviter tout risque de choc électrique, n’eectuez
aucune réparation sur l’appareil qui ne soit décrite par le
manuel d’utilisation. Les éventuelles réparations doivent
être eectuées uniquement par un technicien spécialisé.

1. Lisez ces consignes.

2. Conservez ces consignes.

3. Respectez tous les avertissements.

4. Respectez toutes les consignes d’utilisation.

5. N’utilisez jamais l’appareil à proximité d’un liquide.

6. Nettoyez l’appareil avec un chion sec.

7. Veillez à ne pas empêcher la bonne ventilation de

l’appareil via ses ouïes de ventilation. Respectezles
consignes du fabricant concernant l’installation
del’appareil.

8. Ne placez pas l’appareil à proximité d’une source
de chaleur telle qu’un chauage, une cuisinière ou tout
appareil dégageant de la chaleur (y compris un ampli
depuissance).

ou des prises terre. Les prises bipolaires possèdent deux
contacts de largeur diérente. Leplus large est le contact
de sécurité. Les prises terre possèdent deux contacts plus
une mise à la terre servant de sécurité. Si la prise du bloc
d’alimentation ou du cordon d’ali-mentation fourni ne
correspond pas à celles de votre installation électrique,
faites appel à un électricien pour eectuer le changement
de prise.

10. Installez le cordon d’alimentation de telle façon
que personne ne puisse marcher dessus et qu’il soit
protégé d’arêtes coupantes. Assurez-vous que le cordon
d’alimentation est sufsamment protégé, notamment au
niveau de sa prise électrique et de l’endroit où il est relié à
l’appareil; cela est également valable pour une éventuelle
rallonge électrique.

11. Utilisez exclusivement des accessoires et des
appareils supplémentaires recommandés par lefabricant.

12. Utilisez
exclusivement des
chariots, des diables,
desprésentoirs, despieds
et des surfaces de
travail recommandés
par le fabricant ou

livrés avec le produit.
Déplacezprécautionneusement tout chariot ou diable
chargé pour éviter d’éventuelles blessures en cas dechute.

13. Débranchez l’appareil de la tension secteur en cas
d’orage ou si l’appareil reste inutilisé pendant une longue
période de temps.

14. Les travaux d’entretien de l’appareil doivent
être eectués uniquement par du personnel qualié.
Aucunentretien n’est nécessaire sauf si l’appareil est
endommagé de quelque façon que ce soit (dommagessur
le cordon d’alimentation ou la prise par exemple), siun
liquide ou un objet a pénétré à l’intérieur du châssis,
si l’appareil a été exposé à la pluie ou à l’humidité, s’il ne
fonctionne pas correctement ou à la suite d’une chute.

15. L’appareil doit être connecté à une prise secteur
dotée d’une protection par mise à la terre.

16. La prise électrique ou la prise IEC de tout appareil
dénué de bouton marche/arrêt doit rester accessible
enpermanence.

17. Mise au rebut appropriée de
ce produit: Ce symbole indique
qu’en accord avec la directive DEEE
(2012/19/EU) et les lois en vigueur
dans votre pays, ce produit ne doit
pas être jeté avec les déchets

ménagers. Ce produit doit être
déposé dans un point de collecte agréé pour le recyclage
des déchets d’équipements électriques et électroniques
(EEE). Une mauvaise manipulation de ce type de déchets
pourrait avoir un impact négatif sur l’environnement et la
santé à cause des substances potentiellement
dangereuses généralement associées à ces équipements.
En même temps, votre coopération dans la mise au rebut
de ce produit contribuera à l’utilisation ecace des
ressources naturelles. Pour plus d’informations sur
l’endroit où vous pouvez déposer vos déchets

mairie ou votre centre local de collecte des déchets.

18. N’installez pas l’appareil dans un espace conné tel
qu’une bibliothèque ou meuble similaire.

19. Ne placez jamais d’objets enammés, tels que des
bougies allumées, sur l’appareil.

20. Gardez à l’esprit l’impact environnemental lorsque
vous mettez des piles au rebus. Les piles usées doivent
être déposées dans un point de collecte adapté.

21. Utilisez l’appareil dans un climat tropical
et/ou modéré.

Avertissement

Consultez les informations indiquées sur

la partie inférieure du boitier pour plus
de renseignements quant aux branchements électriques
et aux précautions d’emploi avant d’installer ou d’utiliser
l’appareil.

DÉNI LÉGAL

Music Tribe ne peut être tenu pour responsable pour
toute perte pouvant être subie par toute personne
se ant en partie ou en totalité à toute description,
photographie ou armation contenue dans ce
document. Les caractéristiques, l’apparence et d’autres
informations peuvent faire l’objet de modications
sans notication. Toutes les marques appartiennent
à leurs propriétaires respectifs. Midas, Klark Teknik,
Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic,
TC Helicon, Behringer, Bugera, Auratone et Coolaudio
sont des marques ou marques déposées de Music Tribe
Global Brands Ltd. © Music Tribe Global Brands Ltd.
2019 Tous droits réservés.

GARANTIE LIMITÉE

Pour connaître les termes et conditions de garantie
applicables, ainsi que les informations supplémentaires
et détaillées sur la Garantie Limitée de Music Tribe,
consultez le site Internet musictribe.com/warranty.

Wichtige
Sicherheitshinweise

Vorsicht

Die mit dem Symbol markierten

Anschlüsse führen so viel Spannung,
dassdie Gefahr eines Stromschlags besteht.
Verwenden Sie nur hochwertige, professionelle
Lautsprecherkabel mit vorinstallierten 6,35 mm
MONO-Klinkensteckern oder Lautsprecherstecker
mit Drehverriegelung. Alle anderen Installationen
oder Modikationen sollten nur von qualiziertem
Fachpersonal ausgeführt werden.

Achtung

Um eine Gefährdung durch Stromschlag

auszuschließen, darf die Geräteabdeckung
bzw. Geräterückwand nicht abgenommen werden.
ImInnern des Geräts benden sich keine vom Benutzer
reparierbaren Teile. Reparaturarbeiten dürfen nur von
qualiziertem Personal ausgeführt werden.

Achtung

Um eine Gefährdung durch Feuer bzw.

Stromschlag auszuschließen, darf dieses
Gerät weder Regen oder Feuchtigkeit ausgesetzt werden
noch sollten Spritzwasser oder tropfende Flüssigkeiten
in das Gerät gelangen können. Stellen Sie keine mit
Flüssigkeit gefüllten Gegenstände, wie z. B. Vasen,
aufdasGerät.

Achtung

Die Service-Hinweise sind nur durch

qualiziertes Personal zu befolgen.
Umeine Gefährdung durch Stromschlag zu vermeiden,
führen Sie bitte keinerlei Reparaturen an dem Gerät
durch, die nicht in der Bedienungsanleitung beschrieben
sind. Reparaturen sind nur von qualiziertem
Fachpersonaldurchzuführen.

1. Lesen Sie diese Hinweise.

2. Bewahren Sie diese Hinweise auf.

3. Beachten Sie alle Warnhinweise.

4. Befolgen Sie alle Bedienungshinweise.

5. Betreiben Sie das Gerät nicht in der Nähe vonWasser.

6. Reinigen Sie das Gerät mit einem trockenen Tuch.

7. Blockieren Sie nicht die Belüftungsschlitze. Beachten

Sie beim Einbau des Gerätes die Herstellerhinweise.

8. Stellen Sie das Gerät nicht in der Nähe von
Wärmequellen auf. Solche Wärmequellen sind z. B.
Heizkörper, Herde oder andere Wärme erzeugende Geräte
(auch Verstärker).

9. Entfernen Sie in keinem Fall die
Sicherheitsvorrichtung von Zweipol- oder geerdeten
Steckern. Ein Zweipolstecker hat zwei unterschiedlich
breite Steckkontakte. Ein geerdeter Stecker hat zwei
Steckkontakte und einen dritten Erdungskontakt.
Derbreitere Steckkontakt oder der zusätzliche

mitgelieferte Steckerformat nicht zu Ihrer Steckdose
passt, wenden Sie sich bitte an einen Elektriker, damit die
Steckdose entsprechend ausgetauscht wird.

10. Verlegen Sie das Netzkabel so, dass es vor
Tritten und scharfen Kanten geschützt ist und nicht
beschädigt werden kann. Achten Sie bitte insbesondere
im Bereich der Stecker, Verlängerungskabel und an
der Stelle, an der das Netzkabel das Gerät verlässt,
aufausreichendenSchutz.

11. Das Gerät muss jederzeit mit intaktem Schutzleiter
an das Stromnetz angeschlossen sein.

12. Sollte der Hauptnetzstecker oder eine
Gerätesteckdose die Funktionseinheit zum Abschalten
sein, muss diese immer zugänglich sein.

13. Verwenden Sie nur Zusatzgeräte/Zubehörteile,
dielaut Hersteller geeignet sind.

14. Verwenden
Sie nur Wagen,
Standvorrichtungen,
Stative, Halter oder Tische,
die vom Hersteller benannt
oder im Lieferumfang
des Geräts enthalten

sind. Falls Sie einen
Wagen benutzen, seien Sie vorsichtig beim Bewegen
der Wagen- Gerätkombination, umVerletzungen durch
Stolpern zuvermeiden.

15. Ziehen Sie den Netzstecker bei Gewitter oder wenn
Sie das Gerät längere Zeit nicht benutzen.

16. Lassen Sie alle Wartungsarbeiten nur von
qualiziertem Service-Personal ausführen. EineWartung
ist notwendig, wenn das Gerät in irgendeiner Weise
beschädigt wurde (z. B. Beschädigung des Netzkabels oder
Steckers), Gegenstände oder Flüssigkeit in das Geräteinnere
gelangt sind, das Gerät Regen oder Feuchtigkeit ausgesetzt
wurde, das Gerät nicht ordnungsgemäß funktioniert oder
auf den Boden gefallen ist.

17. Korrekte Entsorgung dieses
Produkts: Dieses Symbol weist
darauf hin, das Produkt
entsprechend der WEEE Direktive
(2012/19/EU) und der jeweiligen
nationalen Gesetze nicht

zusammen mit Ihren
Haushaltsabfällen zu entsorgen. DiesesProdukt sollte bei
einer autorisierten Sammelstelle für Recycling elektrischer
und elektronischer Geräte (EEE) abgegeben werden.
Wegen bedenklicher Substanzen, diegenerell mit
elektrischen und elektronischen Geräten in Verbindung
stehen, könnte eine unsachgemäße Behandlung dieser
Abfallart eine negative Auswirkung auf Umwelt und
Gesundheit haben. Gleichzeitig gewährleistet Ihr Beitrag
zur richtigen Entsorgung dieses Produkts die eektive
Nutzung natürlicher Ressourcen. Fürweitere
Informationen zur Entsorgung Ihrer Geräte bei einer
Recycling-Stelle nehmen Sie bitte Kontakt zum
zuständigen städtischen Büro, Entsorgungsamt oder zu
Ihrem Haushaltsabfallentsorgerauf.

Umgebung, zum Beispiel Bücherregal oder ähnliches.

19. Stellen Sie keine Gegenstände mit oenen
Flammen, etwa brennende Kerzen, auf das Gerät.

20. Beachten Sie bei der Entsorgung von Batterien
den Umweltschutz-Aspekt. Batterien müssen bei einer
Batterie-Sammelstelle entsorgt werden.

21. Verwenden Sie das Gerät in tropischen und/oder
gemäßigten Klimazonen.

Achtung

Bitte lesen Sie auf der Gehäuse-

Unterseite außen die elektrischen und
sicherheitsrelevanten Informationen, bevor Sie das Gerät
installieren oder betreiben.

HAFTUNGSAUSSCHLUSS

Music Tribe übernimmt keine Haftung für Verluste,
die Personen entstanden sind, die sich ganz oder
teilweise auf hier enthaltene Beschreibungen,

Erscheinungsbild und andere Informationen können
ohne vorherige Ankündigung geändert werden.
Alle Warenzeichen sind Eigentum der jeweiligen

Turbosound, TC Electronic, TC Helicon, Behringer,
Bugera, Auratone und Coolaudio sind Warenzeichen
oder eingetragene Warenzeichen der Music Tribe
Global Brands Ltd. © Music Tribe Global Brands Ltd.
2019 Alle Rechte vorbehalten.

BESCHRÄNKTE GARANTIE

Die geltenden Garantiebedingungen und zusätzliche
Informationen bezüglich der von Music Tribe gewährten
beschränkten Garantie nden Sie online unter
musictribe.com/warranty.

6 CPA Series Quick Start Guide 7

de duas palhetas e um terceiro dente de ligação à terra.

18. Não instale em lugares connados, tais como

Favor, consultar as informações no exterior

Turbosound, TC Electronic, TC Helicon, Behringer, Bugera,

Instruções de Segurança
Importantes

Aviso!

Terminais marcados com o símbolo

carregam corrente elétrica de magnitude
suciente para constituir um risco de choque elétrico.
Use apenas cabos de alto-falantes de alta qualidade
com plugues TS de ¼" ou plugues com trava de torção
pré-instalados. Todas as outras instalações e modicações
devem ser efetuadas por pessoasqualicadas.

Este símbolo, onde quer que o encontre,

alerta-o para a leitura das instruções de

manuseamento que acompanham o
equipamento. Por favor leia o manual de instruções.

Atenção

De forma a diminuir o risco de choque

eléctrico, não remover a cobertura
(ouasecção de trás). Não existem peças substituíveis por
parte do utilizador no seu interior. Para esse efeito recorrer
a um técnico qualicado.

Atenção

Para reduzir o risco de incêndios ou

choques eléctricos o aparelho não deve ser
exposto à chuva nem à humidade. Além disso, não deve
ser sujeito a salpicos, nem devem ser colocados em cima
do aparelho objectos contendo líquidos, tais como jarras.

Atenção

Estas instruções de operação devem ser

utilizadas, em exclusivo, por técnicos de
assistência qualicados. Para evitar choques eléctricos
não proceda a reparações ou intervenções, que não as
indicadas nas instruções de operação, salvo se possuir as
quali-cações necessárias. Para evitar choques eléctricos
não proceda a reparações ou intervenções, que não as
indicadas nas instruções de operação. Só o deverá fazer se
possuir as qualicações necessárias.

1. Leia estas instruções.

2. Guarde estas instruções.

3. Preste atenção a todos os avisos.

4. Siga todas as instruções.

5. Não utilize este dispositivo perto de água.

6. Limpe apenas com um pano seco.

7. Não obstrua as entradas de ventilação. Instale de

acordo com as instruções do fabricante.

8. Não instale perto de quaisquer fontes de calor
tais como radiadores, bocas de ar quente, fogões de
sala ou outros aparelhos (incluindo amplicadores)
que produzam calor.

9. Não anule o objectivo de segurança das chas
polarizadas ou do tipo de ligação à terra. Uma cha
polarizada dispõe de duas palhetas sendo uma mais larga
do que a outra. Uma cha do tipo ligação à terra dispõe

A palheta larga ou o terceiro dente são fornecidos para
sua segurança. Se a cha fornecida não encaixar na sua
tomada, consulte um electricista para a substituição da
tomada obsoleta.

10. Proteja o cabo de alimentação de pisadelas ou
apertos, especialmente nas chas, extensões, e no local
de saída da unidade. Certique-se de que o cabo eléctrico
está protegido. Verique particularmente nas chas, nos
receptáculos e no ponto em que o cabo sai doaparelho.

11. O aparelho tem de estar sempre conectado à rede
eléctrica com o condutor de protecção intacto.

12. Se utilizar uma cha de rede principal ou uma
tomada de aparelhos para desligar a unidade de
funcionamento, esta deve estar sempre acessível.

13. Utilize apenas ligações/acessórios especicados
pelofabricante.

14. Utilize apenas com
o carrinho, estrutura,
tripé, suporte, ou mesa
especicados pelo
fabricante ou vendidos
com o dispositivo.
Quandoutilizar um

carrinho, tenha cuidado ao
mover o conjunto carrinho/dispositivo para evitar danos
provocados pela terpidação.

15. Desligue este dispositivo durante as trovoadas
ou quando não for utilizado durante longos períodos
detempo.

16. Qualquer tipo de reparação deve ser sempre
efectuado por pessoal qualicado. É necessária uma
reparação sempre que a unidade tiver sido de alguma
forma danicada, como por exemplo: no caso do cabo
de alimentação ou cha se encontrarem danicados;
naeventualidade de líquido ter sido derramado ou
objectos terem caído para dentro do dispositivo; no caso
da unidade ter estado exposta à chuva ou à humidade;
seesta não funcionar normalmente, ou se tiver caído.

17. Correcta eliminação deste
produto: este símbolo indica que
o produto não deve ser eliminado
juntamente com os resíduos
domésticos, segundo a Directiva
REEE (2012/19/EU) e a legislação

nacional. Este produto deverá
ser levado para um centro de recolha licenciado para a
reciclagem de resíduos de equipamentos eléctricos e
electrónicos (EEE). O tratamento incorrecto deste tipo
de resíduos pode ter um eventual impacto negativo
no ambiente e na saúde humana devido a substâncias
potencialmente perigosas que estão geralmente
associadas aos EEE. Ao mesmo tempo, a sua colaboração
para a eliminação correcta deste produto irá contribuir
para a utilização eciente dos recursos naturais. Paramais
informação acerca dos locais onde poderá deixar o seu
equipamento usado para reciclagem, é favor contactar
os serviços municipais locais, a entidade de gestão de
resíduos ou os serviços de recolha de resíduosdomésticos.

estantes ou unidades similares.

19. Não coloque fontes de chama, tais como velas
acesas, sobre o aparelho.

20. Favor, obedecer os aspectos ambientais de descarte
de bateria. Baterias devem ser descartadas em um ponto
de coletas de baterias.

21. Use este aparelho em climas tropicais
e/ou moderados.

Aviso

da parte inferior do invólucro para obter

informações sobre instalação ou operação do dispositivo.

LEGAL RENUNCIANTE

O Music Tribe não se responsabiliza por perda alguma
que possa ser sofrida por qualquer pessoa que dependa,
seja de maneira completa ou parcial, de qualquer
descrição, fotograa, ou declaração aqui contidas.
Dados técnicos, aparências e outras informações estão
sujeitas a modicações sem aviso prévio. Todas as
marcas são propriedade de seus respectivos donos.
Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy,

Auratone e Coolaudio são marcas ou marcas registradas
do Music Tribe Global Brands Ltd. © Music Tribe Global
Brands Ltd. 2019 Todos direitos reservados.

GARANTIA LIMITADA

Para obter os termos de garantia aplicáveis e condições e
informações adicionais a respeito da garantia limitada do
Music Tribe, favor vericar detalhes na íntegra através do
website musictribe.com/warranty.

8 CPA Series Quick Start Guide 9

MP3 Player

Tuner

DVD Player

Analog Mixer

Paging microphone

CPA Series Hook up

Hook-Up

Loudspeakers

Paging microphone

Analog Mixer

USB Drive

Additional power amplier

Remote

MP3 Player

Tuner

DVD Player

10 CPA Series Quick Start Guide 11

CPA Series Controls

CPA1202/CPA2402

(6) (7) (8) (9) (11)(10) (13) (15) (16)(14)

(1)

(2)

(5)(4)(3)

(17) (18)

Controls

(1) INPUT VOLUME – Adjusts the volume of

the various audio sources. Each channel has
an associated LED that will light green to
indicate active signal, and light red to indicate
clipping.

(2) MEDIA PLAYER - Controls and displays

functions relevant to the Bluetooth and
USB media player. See ‘Getting Started’
section for details.

(3) EQ KNOBS – Adjust the bass and treble for

the master output(s).

(4) MASTER VOLUME – Controls the overall

output level. The associated LED(s) will light
green to indicate active signal, and light red to
indicate amplier limiting/protection.

(5) POWER BUTTON – Turns the unit on and

forces it into standby. The LED will indicate
power status.

(6) MAINS CONNECTOR – Connect the IEC cable

to a mains outlet.

(7) CONFIG SWITCHES – Congure the output

channel for the connected load type.
See ‘Getting Started’ section for details.

(8) OUTPUT – Connect your speaker(s).

(9) AUX OUTPUT – Line-level pre-master output

signal to drive additional zone(s).

(10) REMOTE –Allows the connection of an

external volume control module per channel.
CRC-V series of wall controllers are available as
separate accessories.

(11) INPUT ROUTING – Controls the routing

for each input. (not available on CPA1201)
See ‘Getting Started’ section for details.

(12) CONFIG/CHIME/PHANTOM – Switch 1

enables a Chime function whenever the
priority muting is triggered. Switch 2 engages
48 V phantom power.

(13) USB - Connect a USB ash drive to play audio

les or update the rmware.

(14) EUROBLOCK INPUT – Accepts 3-pin

Euroblock connectors for balanced mic or
line-level sources.

(15) MIC/LINE SWITCH – Optimizes the input gain

for mic or line-level sources.

(16) RCA INPUTS – Allows the connection of

stereo unbalanced sources, which will be
summed to mono.

(17) PRIORITY – Additional 2 pins that activate

the priority ducking function when shorted
together.

(18) VOX KNOB – Sets the input level that will

engage the priority ducking function.

CPA1201/CPA2401

(6) (7)(8) (9) (12)(10) (13) (15) (16)(14)

(1)

(2)

(5)(4)(3)

(17) (18)

12 CPA Series Quick Start Guide 13

Front angle bracket

3-Pin Euroblock Connec tor - Input / Output

5-Pin Euroblock Connec tor - Remote

CPA Series Getting Started

Welcome to the CPA series Quick Start Guide
and thank you for purchasing one of these mixer
ampliers. The following accessories are included
with your product:

- Euroblock input connectors

- Euroblock output and aux output connectors

- Front angle bracket (x2)

- Rear at brackets (x2)

- Rear angle bracket with shoulder screw

- Necessary screws and Torx L-key

- Power cable with mains plug corresponding to the

- Quick Start Guide (this document)

Rack Mounting

The CPA series ampliers come with rubber feet
that enable the amps to be placed on a clear surface
without any additional installation. However,
optional rack mounting hardware is also supplied,
allowing several models to be housed and protected
inside a 19" rack enclosure. Follow these steps to
attach the mounting hardware.

Attach the front angle brackets to either side of
a CPA unit.

Attach the angled brackets by unscrewing the
chassis side front screws and attach again together
with the brackets.

specied countr y version

If your rack has rear rails, attach the rear at brackets
by reusing the screws from the chassis.

Mount the CPA unit(s) into the rack by attaching 4
rack screws through the front angle brackets and
rack rails.

Hold one of the rear angle brackets up to the rear
rack rails so that it lines up next to the rear at
bracket. Do not attach it to the rear rails yet.

Insert the included shoulder screw through the slot
in the rear at bracket and into one of the threaded
holes in the rear angle bracket. The screw should
allow the rear angle bracket to slide forward and
back within the at bracket’s slot.

Rear angle bracket

Rear at bracket

Repeat the process for the other rear angle bracket.

Mount the rear angle brackets to the rear rack rails
using 4 standard rack screws.

Tighten the shoulder screw if necessary.

Standard rack screw: M4 x 8 mm.

The CPA series ampliers are convection cooled and
primarily use the top sur face to dissipate heat. For
demanding applications, it is recommended to have
sucient space (1 RU) above the amplier to reduce
the risk of limiting due to overheating.

Connections

For balanced or microphone input connections, use a
3-pole cable (hot, cold, ground) wired to a Euroblock
connector. Place the Mic/Line switch next to the
input at the appropriate position to optimize input
gain. Alternatively, RCA cables can be connected for
unbalanced stereo sources, but the RCA and
Euroblock inputs should not be used together on the
same input. Note that stereo signals will be summed
to mono.

1

2

3

Always be sure to have all levels at minimum when
connecting or disconnecting audio sources from
the inputs, especially when MIC is selected from
the MIC/LINE switch. Failure to do so may cause the
amplier or speaker to go into a protection mode or
even cause damage.

For output signals, connect a 4-pole Euroblock
connector (2-pole for CPA1201/2401) to the main
output connector(s). Do NOT connect any terminal to
ground. Do NOT connect the cold (-) terminals
together for common returns. Make sure to set the
Cong switches in the correct position to match your
intended use. Speaker wire of 14-18 AWG is
recommended for connections up to 50 feet.

1. hot (+)

2. cold (-)

3. ground/shield

Cong

The rst 2 Cong dipswitches allow the output to
be congured for 100 V, 70 V, 8 , or 4  operation.
Always use the correct conguration for the speakers
being driven! The mode of operation congures both
the maximum voltage of the output and the gain
through the device.

The 8  setting should be used for a pair of 16 
speakers or a single 8  speaker. The 4  setting
should be used for 4 x 16 , 2 x 8 , or a single 4 
speaker. Use 70 or 100 V setting for Constant Voltage
high impedance speaker systems. Make sure the sum
of the power tapping on the speakers plus margin
does not exceed the amplier's maximum power
rating.

The 3rd dipswitch engages a high-pass lter at 80
Hz, which should be used on all Constant Voltage
systems to avoid saturation on the transformer­enabled speakers, but can also be used to help
maintain clear sound from small speakers or bass­heavy audio.

Input Routing

channel as well. This is useful, for example, to send
background music or paging messages to both
zones/sections of a building but maintain other
sources local to each zone.

Phantom power (48 V) can also be supplied to
channels A-D and E-H independently by engaging
the corresponding dipswitch.

Engaging the CHIME function will trigger a chime
sound each time the priority muting is activated.

Priority and Vox

1

2

3

4

5

Inputs A and B (Input A only on CPA1201/2401) have
the ability to mute all other channels when the
Priority function is activated. Activation is achieved
by shorting the 2 Priority pins with a closure
switch, often found on paging mics. Alternatively,
the activation can also be done by the signal on the
prioritized input exceeding a set level (threshold).
Turning the VOX knob counterclockwise sets the
input level required to engage ducking. Set it so
that speaking clearly into the mic exceeds this
threshold, but ambient noise is ignored. Turning the
VOX knob fully clockwise (OFF) disables this feature.
For CPA1202/2402, the ducking aects all other
sources that are routed to the same output as the
prioritized input. For example, if Input A is routed
also to Output B, Input A will have priority over all
other inputs. Input E, however, cannot have priority
over the Output A inputs.

1. priority

2. priority

3. hot (+)

4. cold (-)

5. ground/shield

Remote

Remote

(1 channe l
products )

VCC

10 V

Volume
Control

N/A

Remote

A+B

VCC

10 V

Volume
Control

Channel

A
Volume
Control

Channel

B

Remote B

VCC

10 V

Volume

Control

Channel

B

N/A

RJ-45 P in

Color

(T568B)

White/

1

Orange

Orange

2

White/

3

Green

Brown Ground Ground Ground

8

RJ45 receptacle to connect an optional remote
volume control per channel. Use a standard cable to
connect the CRC-V accessory, or connect a custom
potentiometer with the pinout information. Cable
length above 305 m (1000 ft) is not recommended.

Signal Wake-up

If the amps are powered on, but do not receive
any input signal (below signal present level) for 20
minutes, the system will enter standby mode to save
power consumption. As soon as a signal is detected
at any input, the unit will exit standby mode and
resume normal func tion. The system can also be
waken up by shorting the priority pins.

For CPA1202/2402 units, the routing of inputs to
outputs can be controlled with the input routing
dipswitches. By default (switches down), Inputs A-D
are routed to Output A and Inputs E-H are routed to

1

2

3

4

1. Out A - hot (+)

2. Out A - cold (-)

3. Out B - hot (+)

4. Out B - cold (-)

Output B. However, for sources that should be sent
to both outputs, the corresponding dipswitch can
be engaged to route an input to the other output

14 CPA Series Quick Start Guide 15

Media Player

The front panel media player control panel and
display are used to control audio from both
Bluetooth as well as a connected USB ash drive.
Follow these steps to operate either audio source,
and note that Bluetooth audio will always have
priority over USB.

Some buttons function the same whether Bluetooth
or USB are used as the source audio.

Volume Up/Down - Adjust the volume level.
Repeat - Cycle through the repeat options -

repeat current, repeat all, repeat o.
Fast forward/rewind - move quickly through the

current song.
Previous/next - skip to the next track, replay the

current track from the start, or skip back to the
previous track.

Play/pause
Display - Opens the display menu.
Mode - Opens the Modes menu.

Bluetooth Operation

USB Operation

• Insert a USB ash drive into the rear
panel USB port.

• The folders and tracks can be navigated from the
display screen.

Firmware Update

• Download the rmware le from
labgruppen.com.

• Save the le to the root directory of a
USB ash drive.

• Connect the ash drive to the rear panel USB port.

• Follow the prompt on the display screen to

complete the installation.

• Press and hold the front panel Bluetooth button
(top left of display screen) to activate Bluetooth.

• Open the Bluetooth menu on your media
device (phone, tablet, etc) and search for
“Lab Gruppen CPA”.

• A successful connection will be indicated
in the Media Player display and on your
transmitting device.

• Press the Bluetooth button again to disconnect.

16 CPA Series Quick Start Guide 17

Specications

CPA1 201 CPA2401 CP A1202 CPA2402

Maximum Output Power

4  per channel 120 W 240 W 120 W 240 W
8  per channel 120 W 240 W 120 W 240 W
70 V per channel 120 W 240 W 120 W 240 W
100 V per channel 120 W 24 0 W 120 W 24 0 W

Number of Amplier Channels

Number 1 2

Minimun Load Impedance

4  mode 4 
8  mode 8 
70 V output mode 41  20  41  20 
100 V output mode 82  42  82  42 

Limiter Voltage / Amp Gain

4  mode 31 Vpeak / 25 dB 44 Vpeak / 28 dB 31 Vpeak / 25 dB 44 Vpeak / 28 dB
8  mode 44 Vpeak / 28 dB 62 Vpeak / 31 dB 44 Vpeak / 28 dB 62 Vpeak / 31 dB
70 V output mode 100 Vpeak / 35 dB
100 V output mode 141 Vpeak / 38 dB

Audio Outputs

Amplier output 2-pin Euroblock connector, stereo 4-pin Euroblock connector
Aux output 3-pin Euroblock connector 2 x 3-pin Euroblock connector
Aux output ma x level 4.88 V (16 dBu)

Audio Inputs

Mic/Line with priority/
ducking input

1 x 5-pin Euroblock connec tor (channel A) 2 x 5-pin Euroblock conne ctor (channel A, E)

Mic/Line with summed RCA 2 x 3-pin Euroblock connector, 3 x stereo RCA 4 x 3-pin Euroblock connector, 6 x stereo RCA

Impedance

Input sensitivity for
max amplier output or
max aux output level

Balanced mic /line: 20 k

Unbalanced line and RCA: 10 k

Mic: 0.038 V (-26 dBu)

Balanced: 1.23 V (+4 dBu)

RCA: 0.62 V (-2 dBu) each for mono sum RCA
Maximum input level 4.88 V (+16 dBu)
Microphone phantom voltage 48 V

Controls

Front Power standby button, input an d output gain control, tone controls - bass and treble, bluetooth audio controls

Rear

Tone Controls

Load cong - (4  / 8  / 70 V / 100 V), switchab le 80 Hz high-pass lter, mic/line switch, vox/ducking threshold control,

phantom voltage, input routing (2-channel models only)

Bass ±10 dB @ 100 Hz
Treble ±10 dB @ 10 kHz

Indicators

Power On (blue), force standby (red), st andby (yellow)
Inputs

Signal (green LED) >12.3 mV (-36 dBu)
Fault (red LED) Clip

Master

Signal (green LED) >-50 dBu
Fault (red LED) Overheat, DC fault, over current, etc

CPA1 201 CPA2401 CP A1202 CPA2402

Bluetooth

Frequency range 2402 - 2480 MHz
Channel number 79
Bluetooth ver sion 4.2
Reception range Up to 15 m (XX ft)
Supported codec SBC
Supported proles AVRCP 1.4, A2DP 1.2

System

Output circuit type Class D
Remote connector 1 x RJ45 Ethernet connector 2 x RJ45 Ethernet connector

Performance

Distortion, ⁄ rated power <0.05%
Frequency response 20 Hz to 20 kHz, +0.5 / -1 dB
Crosstalk (2 channel models) >70 dB
Signal-to-noise >97 dBA
High-pass lter 80 Hz HPF

Circuit Protection

Cooling Convection-cooled, fanless
Amplier protection Thermal protection, over current protection, DC protection
Load protection Controlled s tart and shutdown behaviour, DC-fault protection

Power Supply, Voltage (Fuse)

Main voltage 100-240 V~, 50/60 Hz

100-240 V~, 50/60 Hz with ac tive

power factor correction
Fuse T 3.15 A L 250 V T 6.3 A L 250 V T 6.3 A H 250 V T 10 A H 250 V
Power consumption ⁄

rated power @ 4 

th

50 W 60 W 70 W 140 W

Mains connector Standard IEC connector

Dimens ions (H x W x D)

Dimensions (H x W x D) 44 x 437 x 248 mm (1.7 x 17.2 x 9.8")
Weight 3.1 kg (6.8 lbs)
Finish Brushed blac k anodized aluminum chassis with black painte d steel bottom
Approvals CE, CCC, WEEE, cTUVus, PSE, RCM, RoHS, FCC part 15 Class B

Always be s ure to have all leve ls at minimum whe n connectin g or disconne cting audio s ources from t he inputs, es pecially wh en MIC is selec ted from the MI C/LINE swit ch.
Failure to do s o may cause the am plier or spea ker to go into a prot ection mod e or even cause da mage.

18 CPA Series Quick Start Guide 19

Other important information

Important information

1. Register online. Please register your new

Music Tribe equipment right after you purchase it by
visiting labgruppen.com. Registering your purchase using
our simple online form helps us to process your repair
claims more quickly and eciently. Also, read the terms
and conditions of our warranty, if applicable.

2. Malfunction. Should your Music Tribe
Authorized Reseller not be located in your vicinity,
you may contact the Music Tribe Authorized Fulller for
your country listed under “Support” at labgruppen.com.
Should your country not be listed, please check if your
problem can be dealt with by our “Online Support” which
may also be found under “Support” at labgruppen.com.
Alternatively, please submit an online warranty claim at
labgruppen.com BEFORE returning the product.

3. Power Connections. Before plugging the
unit into a power socket, please make sure you are using
the correct mains voltage for your particular model.
Faulty fuses must be replaced with fuses of the same type
and rating without exception.

Aspectos importantes

1. Enregistrez-vous en ligne. Prenez le

temps d’enregistrer votre produit Music Tribe aussi vite
que possible sur le site Internet labgruppen.com. Le fait
d’enregistrer le produit en ligne nous permet de gérer
les réparations plus rapidement et plus ecacement.
Prenez également le temps de lire les termes et conditions
de notre garantie.

2. Dysfonctionnement. Si vous n’avez pas
de revendeur Music Tribe près de chez vous, contactez le
distributeur Music Tribe de votre pays : consultez la liste
des distributeurs de votre pays dans la page “Support” de
notre site Internet labgruppen.com. Si votre pays n’est
pas dans la liste, essayez de résoudre votre problème
avec notre “aide en ligne” que vous trouverez également
dans la section “Support” du site labgruppen.com. Vous
pouvez également nous faire parvenir directement votre
demande de réparation sous garantie par Internet sur
le site labgruppen.com AVANT de nous renvoyer le produit.

3. Raccordement au secteur. Avant de relier
cet équipement au secteur, assurez-vous que la tension
secteur de votre région soit compatible avec l’appareil.
Veillez à remplacer les fusibles uniquement par des
modèles exactement de même taille et de même valeur
électrique — sans aucune exception.

Informations importantes

Weitere wichtige
Informationen

Outras Informações
Importantes

1. Registre-se online. Por favor, registre seu

novo equipamento Music Tribe logo após a compra
visitando o site labgruppen.com Registrar sua compra
usando nosso simples formulário online nos ajuda a
processar seus pedidos de reparos com maior rapidez e
eciência. Além disso, leia nossos termos e condições de
garantia, caso seja necessário.

2. Funcionamento Defeituoso.

Caso seu fornecedor Music Tribe não esteja localizado
nas proximidades, você pode contatar um distribuidor
Music Tribe para o seu país listado abaixo de “Suporte”
em labgruppen.com. Se seu país não estiver na lista,
favor checar se seu problema pode ser resolvido
com o nosso “Suporte Online” que também pode ser
achado abaixo de “Suporte”em labgruppen.com.
Alternativamente, favor enviar uma solicitação de
garantia online em labgruppen.com ANTES da devolução
do produto.

3. Ligações. Antes de ligar a unidade à tomada,
assegure-se de que está a utilizar a voltagem correcta para
o modelo em questão. Os fusíveis com defeito terão de
ser substituídos, sem qualquer excepção, por fusíveis do
mesmo tipo e corrente nominal.

FEDERAL COMMUNICATIONS
COMMISSION COMPLIANCE
INFORMATION

CPA Series

Responsible Party Name: Music Tribe Commercial NV Inc.
Address: 5270 Procyon Street

Las Vegas, NV 89118
USA

Phone Number: [phone]

CPA Series

This equipment has been tested and found to comply with the limits for a Class
B digital device, pur suant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a par ticular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

1. Registro online. Le recomendamos que
registre su nuevo aparato Music Tribe justo después de
su compra accediendo a la página web labgruppen.com.
El registro de su compra a través de nuestro sencillo
sistema online nos ayudará a resolver cualquier
incidencia que se presente a la mayor brevedad posible.
Además, aproveche para leer los términos y condiciones de
nuestra garantía, si es aplicable en su caso.

2. Averías. En el caso de que no exista un distribuidor
Music Tribe en las inmediaciones, puede ponerse en contacto
con el distribuidor Music Tribe de su país, que encontrará
dentro del apartado “Support” de nuestra página web
labgruppen.com. En caso de que su país no aparezca en ese
listado, acceda a la sección “Online Support” (que también
encontrará dentro del apartado “Support” de nuestra
página web) y compruebe si su problema aparece descrito y
solucionado allí. De forma alternativa, envíenos a través de
la página web una solicitud online de soporte en periodo de
garantía ANTES de devolvernos el aparato.

3. Conexiones de corriente. Antes de enchufar
este aparato a una salida de corriente, asegúrese de que dicha
salida sea del voltaje adecuado para su modelo concreto.
En caso de que deba sustituir un fusible quemado, deberá
hacerlo por otro de idénticas especicaciones, sin excepción.

1. Online registrieren. Bitte registrieren
Sie Ihr neues Music Tribe-Gerät direkt nach dem Kauf
auf der Website labgruppen.com. Wenn Sie Ihren Kauf
mit unserem einfachen online Formular registrieren,
können wir Ihre Reparaturansprüche schneller und
ezienter bearbeiten. Lesen Sie bitte auch unsere
Garantiebedingungen, falls zutreend.

2. Funktionsfehler. Sollte sich kein Music Tribe
Händler in Ihrer Nähe benden, können Sie den
Music Tribe Vertrieb Ihres Landes kontaktieren, der auf
labgruppen.com unter „Support“ aufgeführt ist. Sollte Ihr
Land nicht aufgelistet sein, prüfen Sie bitte, ob Ihr Problem
von unserem „Online Support“ gelöst werden kann,
den Sie ebenfalls auf labgruppen.com unter „Support“
nden. Alternativ reichen Sie bitte Ihren Garantieanspruch
online auf labgruppen.com ein, BEVOR Sie das
Produkt zurücksenden.

3. Stromanschluss. Bevor Sie das Gerät an
eine Netzsteckdose anschließen, prüfen Sie bitte, ob Sie
die korrekte Netzspannung für Ihr spezielles Modell
verwenden. Fehlerhafte Sicherungen müssen ausnahmslos
durch Sicherungen des gleichen Typs und Nennwerts
ersetzt werden.

This equipment complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:

(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.

FCC Radiation Exposure Statement

This device complies with FCC radiation exposure limits set forth for an uncontrolled
environment and it also complies with Par t 15 of the FCC RF Rules. This equipment
must be installed and operated in accordance with provided instructions and the
antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating
in conjunction with any other antenna or transmitter. End-user s and installers
must be provided with antenna installation instruc tions and consider removing the
no-collocation statement.

Important information:

Changes or modications to the equipment not expressly approved by Music Tribe
can void the user's authority to use the equipment.

The USB port does not support data transfer with PC.

20 CPA Series Quick Start Guide 21