Music & Lights Pro Audio MZX84 User Manual

HIGH

HIGH

HIGH

PEAK

PEAK

SIG

-15 +15-15 +15

MID

MID

-15 +15

-15 +15

LOW

LOW

-15 +15

-15 +15

1

1

2

2

3

3

4

4

CH 1 CH 2 CH 3 CH 4 CH 5 CH 6 CH 7 CH 8

HIGH

PEAK

PEAK

PEAK

SIG

SIG

-15 +15

-15 +15

-15 +15

SIG

-15 +15

MID

MID

0 0 0 0 0 0 0 0 0 0 0

0

-15 +15

LOW

LOW

-15 +15

1

1

2

2

3

3

4

4

PEAK

SIG

SIG

1

1

2

3

4

1

2

2

3

3

4

4

MZX84

MIXER ZONE

PEAK

PEAK

SIG

CLIP

SIG

0

-10

-20

SIG

HIGH

1

-15 +15

2

LOW

3

-15 +15

MUTE MUTE MUTE MUTE

4

CLIP

CLIP

0

-10

-20

SIG

HIGH

-15 +15

LOW

-15 +15

CLIP

0

0

LEVEL

-10

-10

-20

-20

SIG

HIGH

-15 +15

LOW

-15 +15

0 +10

SIG

HIGH

-15 +15

LOW

-15 +15

MASTER 4MASTER 3MASTER 2MASTER 1

CH 1

CH 2

CH 3

CH 4

POWER

MZX84

MIXER ZONE

ON

OFF

USER MANUAL

EN

REV.001-05/17

All rights reserved by Music & Lights S.r.l. No part of this instruction manual may be

reproduced in any form or by any means for any commercial use.

In order to improve the quality of products, Music&Lights S.r.l. reserves the right to modify the

characteristics stated in this instruction manual at any time and without prior notice.

All revisions and updates are available in the ‘manuals’ section on site www.musiclights.it

MZX84

CONTENTS

Safety

General instructions
Warnings and installation precautions

1 Introduction

1. 1 Features

2 Operating elements and connections

2. 1 Front Panels

2. 2 Rear Panels

2. 3 Block diagrams

2. 5 Specications

3

4
4

5

6
7
8
9

3 General criteria for installation of sound
systems

Packing content:

• MZX84

• User manual

10

4

MZX84

WARNING!

Before carrying out any operations with the unit, carefully read this instruction manual, and keep it with cure
for future reference.
It contains important information about the installation, usage and maintenance of the unit.

SAFETY

General instruction

• The products referred to in this manual conform to the European Community Directives and are there­fore marked with .

• The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.
Never make any modications on the unit not described in this instruction manual, otherwise you will
risk an electric shock.

• Connection must be made to a power supply system tted with ecient earthing (Class I appliance ac­cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units
from indirect contact and/or shorting to earth by using appropriately sized residual current devices.

• The connection to the main network of electric distribution must be carried out by a qualied electrical
installer. Check that the main frequency and voltage correspond to those for which the unit is designed
as given on the electrical data label.

• This unit is not for home use, only professional applications.

• Make certain that no inammable liquids, water or metal objects enter the xture.

• Do not dismantle or modify the xture.

• All work must always be carried out by qualied technical personnel. Contact the nearest sales point for
an inspection or contact the manufacturer directly.

• If the unit is to be put out of operation denitively, take it to a local recycling plant for a disposal which
is not harmful to the environment.

Warnings and installation precautions

• This product in combination with amplier, may be capable of producing dangerous sound levels that
could cause permanent hearing loss. Do not operate for a long period of time at high volume level or
at a level that is uncomfortable.

• If this device will be operated in any way dierent to the one described in this manual, it may suer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like
short circuit, burns, electric shock, ect.

• Do not install the xture near sources of heat.

• The xture must be located in a place where a proper ventilation or thermal dissipation is not impeded.
Do not install the xture in a conned space.

• The output level of the amplier must never exceed the marked sensitivity.

• Do not link the output of any amplier channel back into another channel’s input. Do not parallel or
series connect an amplier’s output with any other amplier’s output.

• Make sure that the signal is correctly connected to the amplier’s input channel and set to proper input
mode.

• Please turn o the power switch before pulling o the power cord.

• Before starting any maintenance work or cleaning the unit, cut o power from the main supply.

• When cleaning unit, please do not use solvents such as acetone or alcohol, since they may damage the
of the unit outer nish and the printings on the panels.