Diffusori PA » DC62T - DC63T - DC64T
I
Manuale
ATTENZIONE! Prima di eettuare qualsiasi operazione con l’unità, leggere con attenzione questo manuale e conservarlo accuratamente per
Avvertenze generali
• I prodotti a cui questo manuale si riferisce sono conformi alle Direttive della Comunità Europea e pertanto recano la sigla . • Durante il funzionamento, ai contatti è
presente una tensione pericolosa no a 100 V~. Non intervenire mai al suo interno al di fuori delle operazioni descritte nel presente manuale; esiste il pericolo di una scarica
elettrica. • Le operazioni di collegamento alla rete di distribuzione dell’energia elettrica devono essere eettuate da un installatore elettrico qualicato. Vericare che
frequenza e tensione della rete corrispondono alla frequenza ed alla tensione per cui l’unità è predisposta, indicate sulla targhetta dei dati elettrici. • Evitare di utilizzare
l’unità: - in luoghi soggetti a vibrazioni, o a possibili urti; - in luoghi a temperatura superiore ai 45°C o inferiori a 2°C. • Evitare che nell’unità penetrino liquidi inammabili,
acqua o oggetti metallici. • Non smontare e non apportare modiche all’unità. • Tutti gli interventi devono essere sempre e solo eettuati da personale tecnico qualicato.
Rivolgersi al più vicino centro di assistenza tecnica autorizzato. • Se si desidera eliminare il dispositivo denitivamente, consegnarlo per lo smaltimento ad un’istituzione
locale per il riciclaggio.
Attenzione e precauzione per l’installazione
• Questo prodotto in combinazione con amplicatore può essere capace di produrre livelli sonori che possono causare perdite d’udito permanenti. Si raccomanda di evitare
l’esposizione ad alti livelli sonori o livelli non confortevoli per periodi di tempo lunghi. • Se il dispositivo dovesse trovarsi ad operare in condizioni dierenti da quelle
descritte nel presente manuale, potrebbero vericarsi dei danni: in tal caso la garanzia verrebbe a decadere. Inoltre, ogni altra operazione potrebbe provocare cortocircuiti,
incendi, scosse elettriche, rotture. • L’ambiente acustico e il posizionamento delle unità inuiscono sul guadagno di volume massimo ottenibile. • Prima di iniziare qualsiasi
operazione di manutenzione o pulizia disconnettere l’unità dalla rete di alimentazione.
riferimenti futuri. Contiene informazioni importanti riguardo l’installazione, l’uso e la manutenzione dell’unità.
Descrizione
Queste colonne sonore sono state realizzate specialmente per l’impiego in impianti PA che usano un’uscita audio di 100 V. La custodia prolata in alluminio le rende particolarmente robuste.
Speciche tecniche
Diusore acustico a colonna in alluminio in grado di riprodurre messaggi vocali con grande intelligibilità.
Fig.1
• Altoparlanti a gamma estesa.
• Trasformatore di linea per impianti a tensione costante 70/100 V.
• Design concepito per consentire l’installazione ad angolo.
• Dimensioni estremamente contenute per un facile inserimento in qualsiasi ambiente.
• Corpo in alluminio estruso verniciato di colore bianco.
• Griglia metallica protettiva.
• Installabile sia su parete che a sotto tramite viti di ssaggio.
Installazione
1. Se l’impianto PA è già acceso occorre per prima cosa spegnerlo completamente!
2. Estrarre il tappo del commutatore di potenza sul retro. Mediante un cacciavite, impostare la potenza nominale
della colonna e la sua impedenza.
3. Collegare la colonna sonora con l’uscita dell’amplicatore PA mediante il cavo di collegamento.
4. Se si collegano più altoparlanti fare attenzione che la polarità sia uguale per tutti (conduttore nero = negativo).
Pulizia e manutenzione
• Durante gli interventi, assicurarsi che l’area sotto il luogo di installazione sia libera da personale non qualicato.
• Tutte le viti utilizzate per l’installazione dell’unità e le sue parti dovrebbero essere assicurate saldamente e non dovrebbero essere corrose.
• Alloggiamenti, elementi di ssaggio e di installazione (sotto, sospensioni) dovrebbero essere totalmente esenti da qualsiasi deformazione.
• Per la pulizia usare solo un panno morbido, asciutto o leggermente inumidito; non impiegare in nessun caso prodotti chimici o detergenti aggressivi.
TECHNICAL DATA DC62T DC63T DC64T
Type Sound column with transformer Sound column with transformer Sound column with transformer
Installation system Wall mounting Wall mounting Wall mounting
Nominal/maximum power 20 W 30 W 40 W
Constant voltage (100 / 70V) 10/20 W 15/30W 20/40W
Frequency response 250-16000 Hz 200-16000Hz 180-16000H z
Sensitivity 90 dB (1W/1m) 92 dB (1W/1m) 94 dB (1W/1m)
Maximum sound pressure 95/100 dB 100/105 dB 105/108 dB
Dimensions (WxHxD) 402x75x105 mm 550x75x105 mm 690x75x105 mm
Weight 1.98 kg 2.74 kg 3.52 kg
INFORMAZIONI GENERALI
Spedizioni e reclami
Le merci sono vendute “franco nostra sede” e viaggiano sempre a rischio e pericolo del distributore/cliente. Eventuali avarie e danni dovranno essere contestati al vettore.
Ogni reclamo per imballi manomessi dovrà essere inoltrato entro 8 giorni dal ricevimento della merce.
Garanzie e resi
Il prodotto è coperto da garanzia in base alle vigenti normative. Sul sito www.musiclights.it è possibile consultare il testo integrale delle “Condizioni Generali di Garanzia”.
Si prega, dopo l’acquisto, di procedere alla registrazione del prodotto sul sito www.musiclights.it. In alternativa il prodotto può essere registrato compilando e inviando il
modulo riportato alla ne del manuale. A tutti gli eetti la validità della garanzia è avallata unicamente dalla presentazione del certicato di garanzia. Music & Lights constata
tramite verica sui resi la difettosità dichiarata, correlata all’appropriato utilizzo, e l’eettiva validità della garanzia; provvede quindi alla riparazione dei prodotti, declinando
tuttavia ogni obbligo di risarcimento per danni diretti o indiretti eventualmente derivanti dalla difettosità.
Le informazioni riportate in questo manuale sono state attentamente controllate. Music & Lights non si assume, tuttavia, responsabilità derivanti da eventuali inesattezze.
Tutte le speciche possono essere variate senza alcuna notica
Per qualsiasi necessità si prega di contattare il nostro ucio tecnico: tel. +39 0771 72190 fax +39 0771 721955 - service@musiclights.it
Rev003 - 11/09 ©2009 Music & Lights s.r.l. - Italy - www.musiclights.it
PA speakers » DC62T - DC63T - DC64T
GB
User Manual
WARNING! Before carrying out any operations with the unit, carefully read this instruction manual and keep it with cure for future
General Instructions
• The products referred to in this manual conform to the European Community Directives and are therefore marked with . • During operation, there is a hazard of contact
with a voltage of up to 100 V~ at the terminals. Never make any modication on the unit not described in this instruction manual, otherwise you will risk an electric shock. •
The connection to the main network of electric distribution must be carried out by a qualied electrical installer. Check that the main frequency and voltage correspond to
those for which the unit is designed as given on the electrical data label. • Never use the xture under the following conditions: - in places subject to vibrations or bumps; - in
places with a temperature of over 45°C or less than 2°C. • Make certain that no inammable liquids, water or metal objects enter the xture. • Do not dismantle or modify the
xture. • All work must always be carried out by qualied technical personnel. Contact the nearest sales point for an inspection or contact the manufacturer directly. • If the
unit is to be put out of operation denitively, take it to a local recycling plant for a disposal which is not harmful to the environment.
Warnings and installation precautions
• This product in combination with amplier, may be capable of producing dangerous sound levels that could cause permanent hearing loss. Do not operate for a long period
of time at high volume level or at a level that is uncomfortable. • If this device will be operated in any way dierent to the one described in this manual, it may suer damages
and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short circuit, burns, electric shock, ect. • The maximum achievable volume
gain depends on the acoustical environment and positioning of the units. • Before starting any maintenance work or cleaning the unit, cut o power from the main supply.
reference. It contains important information about the installation, usage and maintenance of the unit.
Description
These speaker columns are designed especially for PA systems which operate with 100 V technique. Due to the cabinets of aluminium prole they are
especially robust.
Technical specications
Aluminum sound coloumn that reproduces speech with perfect intelligibility
• Wide band loudspeakers.
Fig.1
• Line transformer for 70/100 V constant voltage systems.
• The shape is designed to permit corner installation.
• The compact dimensions makes it easy to integrate in any environment.
• White body in stove-enamelled extruded aluminum.
• Metal front protection grille.
• Easy to install on walls or to set on ceiling by means of screws.
Installation
1. In case the PA system is switched on, rst switch it o completely!
2. On the rear side pull out the locking plug of the power selector switch. By means of a screw driver adjust the rated
load by the speaker column and its impedance with the switch.
3. Connect the speaker column via the connection cable to the output of the PA amplier.
4. With the connection of several speakers observe that all speakers are polarized in the same way (black core = negative
pole).
Cleaning the unit and maintenance
• Make sure the area below the installation place is free from unwanted persons during setup.
• All screws used for installing the device and any of its parts should be tightly fastened and should not be corroded.
• Housings, xations and installation spots (ceiling, suspensions) should be totally free from any deformation.
• For cleaning only use a soft cloth, dry or slightly damp; never use chemicals or aggressive detergents.
TECHNICAL DATA DC62T DC63T DC64T
Type Sound column with transformer Sound column with transformer Sound column with transformer
Installation system Wall mounting Wall mounting Wall mounting
Nominal/maximum power 20 W 30 W 40 W
Constant voltage (100 / 70V) 10/20 W 15/30W 20/40W
Frequency response 250-16000 Hz 200-16000Hz 180-16000H z
Sensitivity 90 dB (1W/1m) 92 dB (1W/1m) 94 dB (1W/1m)
Maximum sound pressure 95/100 dB 100/105 dB 105/108 dB
Dimensions (WxHxD) 402x75x105 mm 550x75x105 mm 690x75x105 mm
Weight 1.98 kg 2.74 kg 3.52 kg
GENERAL INFORMATION
Shipments and claims
The goods are sold “ex works” and always travel at the risk and danger of the distributor.
Eventual damage will have to be claimed to the freight forwarder. Any claim for broken packs will have to be forwarded within 8 days from the reception of the goods.
Warranty and returns
The guarantee covers the xture in compliance with existing regulations. You can nd the full version of the “General Guarantee Conditions” on our web site www.musiclights.
it. Please remember to register the piece of equipment soon after you purchase it, logging on www.musiclights.it. The product can be also registered lling in and sending
the form available on your guarantee certicate. For all purposes, the validity of the guarantee is endorsed solely on presentation of the guarantee certicate. Music & Lights
will verify the validity of the claim through examination of the defect in relation to proper use and the actual validity of the guarantee. Music & Lights will eventually provide
replacement or repair of the products declining, however, any obligation of compensation for direct or indirect damage resulting from faultiness.
The information provided in this manual has been carefully checked. However Music & Lights is not responsible for any possible inaccuracy.
Design and specications are subject to change without notice.
For further information, please contact our Service Center: tel. +39 0771 72190 fax +39 0771 721955 - service@musiclights.it
Rev003 - 11/09 ©2009 Music & Lights s.r.l. - Italy - www.musiclights.it