Music Hall PA1.2 User manual

music hall

pa1.2

INSTRUCTION MANUAL

music hall

http://www.musichallaudio.com

may 2008

CONGRATULATIONS ON YOUR PURCHASE

You have selected an exceptional phono preamplifier. Each component used in
the construction of the pa1.2 was selected to provide you with superior
performance and the highest level of sound reproduction available today. We
know of no phono preamplifier that costs as much to produce yet sells for so little.
The precise and elegant design of this phono preamplifier makes it easy to install
and operate. Please take a few moments to read over the operating instructions
to ensure that you get the best performance from your preamplifier and years of
trouble-free service.

SAFETY GUIDELINES

This product is designed and manufactured to strict quality and safety standards.
However, you should be aware of the following installation and operation
precautions:

1. Take heed of warnings and instructions

Read all the instructions before connecting or operating the preamplifier.

Keep this manual so you can refer to these safety instructions.

2. Water and Moisture

To reduce the risk of fire or electric shock, do not expose the phono preamplifier
to moisture or water. If the phono preamplifier is exposed to moisture,
immediately disconnect the power cord from the wall. Take the preamplifier to an
authorized Music Hall service center for inspection. Do not touch the phono
preamplifier, power cord, or plug with wet hands.

3. Object or liquid entry

Do not allow foreign objects or liquids into the unit. If this happens, immediately
disconnect the power cord from the wall and take the unit to an authorized music
hall service center for inspection.

4. Heat

Keep the phono preamplifier away from naked flames, radiators, heat registers,
stoves, or any other heat-producing appliances (including amplifiers).

1

5. Climate

The phono preamplifier has been designed for use in moderate climates. Do not
attempt to use below 41 degrees Fahrenheit (5 degrees Celsius) or above 95
degrees Fahrenheit (35 degrees Celsius).

6. Racks and Stands

Place the phono preamplifier on a fixed, level surface strong enough to support its
weight. Do not place it on a moveable cart that could tip over. We recommend
only using stands approved for use with audio equipment.

7. Cleaning

A soft towel can be used.

8. Power Sources

Connect the phono preamplifier only to a power supply of the type and voltage
described in the operating instructions or specified on the rear panel of the unit.

9. Power-cord protection

Connect the phono preamplifier to the power outlet only with the supplied power
supply. Do not modify the supplied power supply in any way. Do not attempt to
defeat grounding and/or polarization provisions.

Do not use extension cords.

Do not route the power cord where it will be crushed, pinched, bent at severe
angles, exposed to heat, or damaged in any way.

10. Non-use periods

If the preamplifier is to be left unused for a long period of time, the power supply
should be unplugged from the wall outlet.

11. Damage Requiring Service

Stop using the phono preamplifier immediately and have it inspected by an
authorized Music Hall service center whenever:

1. The power supply cord or plug has been damaged.

2. The phono preamplifier has been exposed to rain.

3. The phono preamplifier does not operate properly.

4. The phono preamplifier has been dropped or damaged.

5. Smoke or any unusual smell is detected from the phono preamplifier.

2