Music Hall DAC25.3 User Manual

music hall

dac25.3

usb/tube 24bit 192kHz digital to analog converter

INSTRUCTION MANUAL

phones

dac25.3 digitalto analog converter

on/off

usb

coa- opt-

xlr

input src

96k

lock

192k

music hall

http://www.musichallaudio.com

volume

Congratulations on Your Purchase

You have selected a state of the art digital-to-analog converter (DAC). Each
component chosen for assembly and construction of the music hall dac25.3 was
selected to provide you with superior performance and the highest level of sound
reproduction available today. We know of no digital-to-analog converter that costs
as much to produce that sells for so little. Please take a few moments to read
over the instruction manual to ensure that you get the best performance from
your unit and years of trouble-free service.

Safety Guidelines

This product is designed and manufactured to strict quality and safety standards.
However, you should be aware of the following installation and operation
precautions:

1. Take heed of warnings and instructions

Read all the instructions before connecting or operating the unit.

Keep this manual so you can refer to these safety instructions. Heed all warnings
and safety information in these instructions and on the unit.

2. Water and Moisture

To reduce the risk of fire or electric shock, do not expose the unit to moisture or
water. If the unit is exposed to moisture, immediately disconnect the power cord
from the wall. Take the unit to an authorized music hall service center for
inspection. Do not touch the unit, power cord, or plug with wet hands.

3. Object or liquid entry

Do not allow foreign objects or liquids into the unit. If this happens, immediately
disconnect the power cord from the wall and take the unit to an authorized music
hall service center for inspection.

4. Ventilation

You must allow 2 inches (5 cm.) of unobstructed clearance around the unit. Do
not place the unit on a bed, sofa, rug, or similar surface that could block
ventilation from the bottom. Do not stack another component on top of the
amplifier. If the component is placed in a bookcase or cabinet, it must be
ventilated to allow proper cooling.

1

5. Heat

Keep the unit away from naked flames, radiators, heat registers, stoves, or any
other heat-producing appliances (including amplifiers).

6. Climate

The unit has been designed for use in moderate climates. Do not attempt to use
below 41 degrees Fahrenheit (5 degrees Celsius) or above 95 degrees Fahrenheit
(35 degrees Celsius).

7. Rack and Stands

Place the unit on a fixed, level surface strong enough to support its weight. Do
not place it on a moveable cart that could tip over. We recommend only using
stands approved for use with audio equipment.

8. Cleaning

Unplug the unit from the mains supply before cleaning. The case should normally
require only a wipe with a soft lint-free cloth.

9. Power Sources

Only connect the unit to a power supply of the type and voltage described in the
operating instructions or specified on the rear panel of the unit.

10. Power cord protection

Connect the unit to the power outlet only with the cord supplied. Do not modify
the supplied cable in any way. Do not attempt to defeat grounding and/or
polarization provisions. Do not use extension cords. Do not route the power cord
where it will be crushed, pinched, bent at severe angles, exposed to heat, or
damaged in any way.

11. Non-use periods

If the unit is to be left unused for a long period of time, the power cord should be
unplugged from the wall outlet.

2