Musical Fidelity XPSU Mk3 Owners manual

SPECIFICATIONS

Power outputs Four, each 12-0-12Volts AC 20VA

Power requirement 230/115/100 Volts AC 50/60Hz

Factory pre-set

Power consumption 100 Watts

Dimensions 180mm (7.1") wide

88.2mm (3.5") high including feet
208mm (8.2") deep

Weights Unit, net : 3.1 kg(6 lbs 13oz)

Total packed :3.65 kg(8 lbs 8oz)

Accessories IEC mains lead (10 Amp type),

Four DIN-to-DIN type low-voltage leads

POWER SUPPLY

Instructions for use

Musical Fidelity reserves the right to make improvements which

may result in specification or feature changes without notice.

X-PSUV3Issue 2 May 2004

Introduction

Series unit, and the other end into one of the

The blue power

DESIGNED IN ENGLAND BY MUSICAL FIDELITY

CONSUMPTION 100W

IMPORTANT

THIS

POWER SUPPLY UNIT

Connections

Thank you for purchasing the X-PSU Version 3 X Series upgrade power supply.

The X-PSU

V3

upgrades and powers up to four X

We sincerely hope that by further improving the performance of your X
components the X-PSU

V3

will bring you many years of listening pleasure.

V3

Series units.

V3

Series

Installation Precautions

Your new X-PSU
as with all electronic devices, it is necessary to observe a few precautions :

n Do not use the X-PSU

dripping or splashing and no objects filled with liquids, such as vases,
must be placed on the unit.

n Keep the X-PSU

sources, such as lighted candles, should be placed on the unit.

n Place all connecting cables where they are not likely to be walked on, or

trapped by items placed on them.

V3

is designed and built to provide trouble-free performance, but

V3

near water. The unit must not be exposed to

V3

away from heat such as radiators. No naked flame

All connections should be made before the mains lead is plugged in.

The X-PSU
with the X

V3

has four power outputs marked 1 to 4, which are suitable for use

V3

Series range of products.

IEC Mains Inlet SocketMains rocker switch

APPLIANCE

MUST BE
EARTHED

SERIAL NUMBERPOWER

4 123

Low-voltage outlet sockets

OUTPUTS

50/60Hz

Using any of the four accessory 3-pin DIN leads supplied, plug one end into the
low-voltage inlet socket on your X
X-PSU

V3

’s outlet sockets on the rear panel.

V3

Never open the case of the X-PSU

V3

yourself, as this will invalidate the
guarantee. There are no user adjustments inside. Please refer all service work to
an authorised Musical Fidelity agent.

X-PSUV3Issue 2 May 2004

Repeat as necessary for up to three remaining X

V3

Series low voltage power

sockets.

Ensure that the mains switch on the back panel of the X-PSU

V3

is in the “off”

position.

Now insert the accessory IEC mains lead into the X-PSU

V3

’s inlet socket, and

plug the other end into a convenient wall mains outlet.

Press the mains rocker switch on the back panel of the X-PSU

V3

.

indicator LED on the front panel will light confirming that the unit is now ready
for use.