Musical Fidelity XPLORA Owners manual

INTRODUCTION
FM TUNER with Remote Control and RDS
INSTRUCTIONS FOR USE
Thank you for purchasing the Musical Fidelity
X-PLORA FM tuner with remote control and RDS.
Used properly and carefully, it should give you many
The X-PLORA is fitted with the latest Radio Data
System (RDS) circuitry allowing station names to be
displayed. This function only works if the tuned station
supports RDS. Special noise reduction techniques are used
to achieve both an excellent technical specification and
unparalleled sound quality.
Aesthetically, the X-PLORA is a perfect match for the
X-RAY CD player, X-A1 or X-A100R integrated
amplifiers or the X-P100/X-AS100 Pre/Power amplifier
combination. Together these components form one of the
finest hi-fi systems available.
Dust regularly with a soft duster or soft brush but be
careful when using cleaning or polishing agents - they may
harm the surface finish.
If you have any questions about anything in your
audio system, please consult your dealer who is there to
help and advise you.
X-PLORA
X-PLORA
Instructions For Use. Page 1
Instructions For Use. Page 1
SAFETY INFORMATION
IMPORTANT!
This unit is supplied in the UK with a mains lead fitted with a moulded 13 amp plug. If, for any reason, you need to cut off this plug, please observe the following safety precautions. Please dispose of the cut off plug safely. It must not be plugged into a mains power supply. The wires in the mains lead supplied with this appliance are coloured in accordance with the following code:
Green and yellow..............Earth
Blue...............................Neutral
Brown................................Live
WARNING - This appliance must be earthed
As the colours of the wires of the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:
• The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked with the letter E or coloured green or green-and-yellow, or by the earth symbol
.
• The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.
• The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.
• If connecting to a BS1363 plug, a 10 amp fuse must be used.
WARNING - Radio Frequency Interference (RFI)
This Hi-Fi product has been tested to ensure that its operation will not be adversely affected by normal background levels of R.F.I. (Radio Frequency Interference). It is possible that if the unit is subjected to abnormally high levels of R.F.I. the unit may not perform as specified. In the unlikely event of this happening, please contact Musical Fidelity's service department.
The unit has also been tested to ensure that it does not radiate excessive levels of RFI that could affect other pieces of electronic or electrical equipment.
The electronics in modern hi-fi equipment is complex and hence may be damaged by light­ning. It is possible that during electrical storms the operation of some equipment may be adversely affected. For complete protection of your hi-fi system during such storms, mains plugs should be removed and aerial leads disconnected.
Do not remove any covers, the X-PLORA will not be covered under warranty if it has been tampered with. There are no user adjustments within. Please refer all service work to an authorised Musical Fidelity agent.
Always ensure that when disconnecting and reconnecting your hi-fi equipment the mains supply is switched off.
X-PLORA
Instructions For Use. Page 2
SAFETY INFORMATION
To comply with North American regulations this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
WARNING - ANY MODIFICATIONS OR CHANGES TO THIS UNIT NOT EXPRESSLY APPROVED BY MUSICAL FIDELITY WHO ARE THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER'S AUTHORITY TO OPERATE THIS EQUIPMENT
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. As it cannot be guaranteed that interference will not occur in a particular installation the user is encouraged to try to correct any interference experienced, to radio or TV broadcasts, by one or more of the following measures:-
Identify the source of interference, turn off each unit in turn, check whether the
interference disappears.
Re-orientate or relocate the receiving aerial.
Increase the separation between the affected units.
Connect the units into mains outlets on different circuits.
Consult a dealer or experienced TV/radio technician for help.
X-PLORA
Instructions For Use. Page 3
FACILITIES AND CONNECTIONS
18
19
1 2 3 4 5 6 7
FRONT PANEL
1 POWER mains on/off switch 2 Tuner display 3 STORE button 4 MODE button 5 TUNE DOWN button 6 TUNE UP button 7 STEREO/MONO button
REAR PANEL
8 Right AUDIO OUTPUT 9 Left AUDIO OUTPUT 10 75 ohm AERIAL Socket 11 IEC type mains inlet
8 9 10 11
REMOTE CONTROL
12 DISPLAY button 13 TUNE UP button 14 TUNE DOWN button 15 STEREO/MONO button 16 RDS ON/OFF button 17 LOCAL/DX button 18 SIGNAL STRENGTH button 19 MODE button 20 STORE button
12
13
14
15
16
20
17
X-PLORA
Instructions For Use. Page 4
Loading...
+ 7 hidden pages