![](/html/34/34d1/34d1dc37216c043336ce911e21dcac48328ff830b0a4ebc0a14fbd54f0cac746/bg1.png)
Tri-Vista
MONOBLOC POWER AMPLIFIER
INSTRUCTIONS FOR USE
Thank you for purchasing the Musical Fidelity
Tri-Vista Power Amplifier.
Used properly and carefully, it should give you many
years of outstanding musical reproduction.
Aesthetically, the Tri-Vista Power amplifier is a perfect match for the
Tri-Vista Preamplifier and Tri-Vista SACD player which are part of
our 20th Anniversary series.
Together, they form one of the finest hi-fi systems available today.
Dust regularly with a soft duster or soft brush but be
careful when using cleaning or polishing agents - they may
harm the surface finish.
If you have any questions about your audio system,
please consult your dealer who is there to help and advise.
Issue A: April 2003
Tri-Vista Power (Mono) Instructions for Use Page 1 of 9
![](/html/34/34d1/34d1dc37216c043336ce911e21dcac48328ff830b0a4ebc0a14fbd54f0cac746/bg2.png)
SAFETY INFORMATION
IMPORTANT! (U.K. only)
This unit is supplied in the U.K. with a mains lead fitted with a moulded 13 amp plug.
If, for any reason, you need to cut off this plug, please remove the fuse holder and dispose of
the plug safely, out of reach of children. It must not be plugged into a mains outlet.
The wires in the mains lead supplied with this appliance are coloured in accordance
with the following code:
Green and yellow ........... Earth
Blue ............................ Neutral
Brown ............................. Live
WARNING - This appliance must be earthed
As the colours of the wires of the mains lead of this appliance may not correspond with the
coloured markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured green-and-yellow must be connected to the terminal in the plug
which is marked with the letter E or coloured green or green-and-yellow, or by the earth
symbol:
The wire which is coloured brown must be connected to the terminal which is marked with the
letter L or coloured red.
The wire which is coloured blue must be connected to the terminal which is marked with the
letter N or coloured black.
If connecting to a BS1363 plug, a 13 amp fuse must be used.
WARNING:
The Tri-Vista Power is a powerful amplifier and must necessarily supply high
voltages through the loudspeaker terminals. Therefore, to avoid any possibility of
an electric shock DO NOT TOUCH THE SPEAKER TERMINALS when the unit
is being used.
WARNING:
Any modifications to this product not expressly approved by Musical Fidelity who
is the party responsible for standards compliance could void the user’s authority to
operate this equipment.
Issue A: April 2003
Tri-Vista Power (Mono) Instructions for Use Page 2 of 9
![](/html/34/34d1/34d1dc37216c043336ce911e21dcac48328ff830b0a4ebc0a14fbd54f0cac746/bg3.png)
GENERAL ADVICE
INSTALLATION PRECAUTIONS and USER INFORMATION
Your new Tri-Vista Power amplifier is designed and built to provide trouble-free performance,
but as with all electronic devices it is necessary to observe a few precautions:
Heed all warnings shown on the back of the product.
Only connect the Tri-Vista Power amplifier to a mains outlet having the same voltage as
marked at the back of the unit.
Always ensure that when disconnecting and reconnecting your audio equipment the mains
supply is switched off.
Position the mains lead and signal interconnects where they are not likely to be walked on or
trapped by items placed on them.
Do not use near water, or place water-filled containers on the amplifier, for example, flower
vases or potted plants. If water does spill inside, immediately pull out the mains plug from
the wall socket and inform your dealer, who should then check the unit before further use.
Entry of liquid into the amplifier is dangerous, and may cause electric shock or fire hazard.
Do not place the unit near heat sources such as radiators, direct sunlight or other equipment.
The case of this amplifier can run at high temperatures - operate the unit in a well ventilated
area, and do not touch the side heatsink fins after periods of use at high output power.
Do not remove covers or try to gain access to the inside. There are no internal user adjustments. Refer all service work to an authorised Musical Fidelity agent.
NOTE: Unauthorised opening of the equipment will invalidate any warranty claims.
There are fuses inside the Tri-Vista amplifier. In the unlikely event that one blows, refer the unit
to your audio dealer. Do NOT try to replace the fuse yourself as this will invalidate the warranty.
Dust regularly with a soft duster or soft brush, but be careful when using cleaning or polishing
agents - they may harm the surface finish.
The electronics in modern hi-fi equipment is complex and may, therefore, be adversely affected
or damaged by lightning. For protection of your audio system during electrical storms, remove
the mains plugs and disconnect any aerial lead.
If after-sales service is required, to help your dealer identify the Tri-Vista amplifier please quote
the serial number located on the rear panel of the unit.
RADIO FREQUENCY INTERFERENCE (R.F.I)
This product has been tested to ensure that its operation is not adversely affected by normal
background levels of R.F.I., and that it does not itself generate excessive amounts of interference. However, if a problem persists, please contact your Musical Fidelity agent.
Issue A: April 2003
Tri-Vista Power (Mono) Instructions for Use Page 3 of 9
![](/html/34/34d1/34d1dc37216c043336ce911e21dcac48328ff830b0a4ebc0a14fbd54f0cac746/bg4.png)
CONNECTIONS AND FACILITIES - MAIN UNIT
Illuminated feet with multi-colour indicator LEDs
Front panel
Back panel
Audio input socket (RCA type)
Speaker output
terminals
(three pairs)
Control lead socket
Issue A: April 2003
Mains input from
power supply unit
Power supply lead input - low voltage
Tri-Vista Power (Mono) Instructions for Use Page 4 of 9