Musical Fidelity M6si Specification Sheet

M6si Integrated Amplier

Audiophile Grade Stereo Integrated Amplier

At Musical Fidelity we think of
the M6si as being a destination
product. The M6si offers such
excellent performance, facilities
and power that unless you are
seeking the most exotic high-end
sound quality you would never

need another amplier. We believe

it’s that good.

Internally, the M6si is congured as

2 independent monobloc power
amps with a separate pre amp.
It is, in fact, a pre amp with
2 monobloc power amps that
just happen to share the same
casework.

The M6si has 220wpc. It has very
low distortion, outstanding noise

ratio and extremely at frequency

response. Its inputs are phono
(MM/MC), 4 line level, 1 balanced
XLR and 1 USB ‘B’ up to 24bit 96kHz
asynchronous.

The M6 combination of high power,
high current and extraordinar y
stability means that it can drive any
loudspeaker with ease.

In use it is hard to hear any practical
difference between the M6si
and other much more expensive

ampliers. In proper blind listening

comparisons, the M6si performs
incredibly well. If we sound rather
enthusiastic it’s because we are.

We love the M6si and hope that you
do too.

M6si In Brief

• 220WPC

• Excellent technical performance

• Amazing load driving ability,
unconditional stability will drive
any loudspeaker

• Wide range of useful inputs
including asynchronous USB and
switchable MM / MC Phono

• Preamp output

• Internally it is a separate preamp
with two independent monobloc
power amps; effectively a
separates system in a box

• Excellent, hunky build quality

www.musicaldelity.com© Copyr ight Musical Fidelity 2015

M6si INTEGRATED AMPLIFIER

SPECIFICATION

Amplier

Power output: 220 Watts per channel into 8 Ohms

THD (+ noise): <0.007 % typical 20 Hz - 20 kHz

Signal to Noise Ratio: >107dB ‘A’ - weighted

Frequency Response: +0, – 0.1dB, 10Hz to 20 kHz

Inputs

4x Line Level RCA

1x Line Level XLR Balanced

1x USB type ‘B’ connector - asynchronous
data stream at up to 24-bit/96kHz

1 x switchable phono input

Trigger in

Phono Input

Sensitivit y: 3mV nominal (MM), 0.4mV nominal (MC)

Signal / noise ratio: >84dB ‘A’-weighted

Input impedance: 47k Ohms (MM and MC)

Frequency response: RIAA/IEC ±0.5dB 20Hz-20kHz

Outputs

Trigger out

General

Dimensions - WxHxD (mm): 440 x 125 x 400

Weight (unpacked / packed): 16.6 kg/ 21.3 kg

www.musicaldelity.com© Copyr ight Musical Fidelity 2015