Musical Fidelity M5Si User Manual
M5si – Integrated Amplier
The M5si is a real high end amplier.
At 150wpc, with high current
delivery, it will drive virtually any
loudspeaker easily.
Internally the M5si is congured
as two independent monoblocs
with a separate preamp, but all
mounted on one pcb. Its technical
performance is about equal to
the M6si.
The M5si has very low distortion,
outstanding noise ratio and an
extremely at frequency response.
Inputs; phono (mm), 4 line, and USB
’B’ up to 24bit 96kHz.
The M5si produces an extraordinary
sweet clear lucid sound.
Signicantly it was developed after
our amazing legendary Nu-Vista
800. Consequently some of the
Nu-Vista 80 0’s subtle pcb layout
solutions have found their way into
the M5si.
When you hear it we are sure you
will understand the relationship
between the two. The M5si projects
a deep and wide stereo image
with ver y extended bass and a
crystalline top end without a trace
of harshness.
M5si Integrated Amplier In Brief
• 15 0 wpc
• E xcellent technical per formance
• Preamp output
• Unconditional stability, will drive
any loudspeaker
• Wide range of useful inputs
including asynchronous USB
and MM phono
• E xcellent hunk y build quality
www.musicaldelity.com© Copyright Musical Fi delity 2015
M5si – INTEGRATED A MPLIFIE R
SPECIFICATION
Amplier
Power output: 150 Watts per channel into 8 Ohms
THD (+ noise): <0.010 % typical 20Hz - 20 kHz
Signal to Noise Ratio: >100 dB ‘A’ - weighted
Frequency Response: +0, – 0.1dB, 10Hz to 20 kHz
Inputs
4x Line Level RCA
1x USB type ‘B’ connector - asynchronous data
stream at up to 24-bit/96kHz
1 x MM phono input
Trigger in
Phono Input
Sensitivity: 3mV nominal (MM)
Signal / noise ratio: >70dB ‘A’-weighted
Input impedance: 50k Ohms (MM)
Frequency response: RIAA/IEC ±0.5dB 20Hz-20kHz
Outputs
Trigger out
Fixed, line level output
Variable, preamp output
General
Dimensions - WxHxD (mm): 440 x 100 x 405
Weight (unpacked / packed): 14.6 kg/ 18.8 kg
www.musicaldelity.com© Copyright Musical Fi delity 2015
Loading...