Musica C101 User Manual

1

Thank’you of purchasing this EamLab product. Who are dedicated to the policy

of creating the highest quality audio components, are proud to introduce. You
can be assured that in preparing this component, every attention was paid in
great detail by our entire staff to strict quality control . This dedication was
followed throughout the wole manufacturing process – from basic research,
the selection of each parts, assembly and testing – so that we could supply a
product with every confidence that it will give full owner satisfaction and pride.

We welcome you to the fast-growning Eam Lab circle of dedicated audio
enthusiasts and true sound lovers

User manual

MUSICA C101 preamplifier

2

The C101 is substantially the evolution of the preamplifier HP01.

In C101 the circuit of signal amplification is entrusted darlington
transistor technology in configuration DPFETM (Darlington Parallel
Follow Emitter) operating in pure Class A.

The new stadiums input and output HDCA guarantee wide flat
frequency response with high slew / rate and high crest factor.
improvements on the dynamics of reproduction and micro- contrast
are to unprecedented levels.

The volume control is provided by the digital potentiometer PGA2310
Burr Brown who is currently the best potentiometer in high-end
market.

The power transformer is encapsulated with resin and thus
eliminating any possible variation of the original audio signal which
would become dirty through electromagnetic fields.

The main power capacitors are designed on our tight specifications.
They have a very high temperature coefficient and aluminum armor.
Together with the resistors in the metal film 1% tolerance and the
decoupling capacitors in polypropylene audiograde we obtained
results certainly real.,

Features

3

Contents

2 …………….Introduction & features
3 …………….Table of contents
4 …………….Safety instructions
5 …………….Use remote control
6 …………….Menu and Submenu on display
8 …………….Front pannel instruction
9 …………….Connections
10 …………….Troubleshooting guide
11 …………….Datasheet
12 …………….guarantee policy

4

1. For best performance, please read
this manual carefully. Keep it in a safe
place for future reference.

2. Install the unit in a cool, dry, clean
place away from windows, heat
sources, intense vibration, dust,
humidity, cold, and sources of
humming (transformers, motors,
etc.).. To prevent fire or shock hazard
do not expose the unit to water and
moisture.

3. Never open the equipment. If
something should get into all 'inside,
contact your dealer.

4. Do not operate the switches and
other controls with force. When
moving the unit, first disconnect the
power cord and cables connected to
other devices. Never pull the wires
themselves.

5. The voltage used must be
specified.
Using this product with a current

whose voltage is higher than
specified is dangerous and may cause
fire or other damage. EAM LAB is not
responsible for any damage due to an
incorrect use of the appliance

6. Always set the VOLUME control to
min. before starting playback of the
audio source. Gradually increase the
volume to an appropriate level after
playback has started.

7. Do not clean the unit with
chemical solvents: this could ruin the
finish. Instead, use a soft, dry cloth or
denatured alcohol.

8. In case of malfunction, before
concluding that the unit needs to be
repaired, consult the chapter on
"TROUBLESHOOTING".

9. If you are not using the unit for
long periods of time (eg for a
vacation), disconnect the power plug

10. During thunderstorms,
disconnect the power cord to avoid
any lightning damage the unit.

11. Grounding or Polarization: take
the necessary precautions to ensure
that the grounding or polarization are

not canceled.

Before you start to use read following information

Safety information