Murphy PV485, PowerView Installation Manual

00-02-1018

2017-05-23

PowerView®

Model PV485

Installation Manual

Section 78

BEFORE BEGINNING INSTALLATION OF THIS MURPHY
PRODUCT:

 Read and follow all installation instructions.
 Please contact Enovation Controls immediately if you have

any questions.

 A visual inspection of this product for damage during

shipping is recommended before installation.

 It is your responsibility to ensure that qualified mechanical

and electrical technicians install this product.

Contact Enovation Controls’ Technical Service if you have any
questions or concerns at: [phone].

In order to consistently bring you the highest quality, full-featured products, we reserve the right to change our
specifications and designs at any time. The latest version of this manual can be found at
www.murphybyenovationcontrols.com.

Table of Contents

Hardware Installation ................................................................................................................. 1

Inspecting Package Contents .......................................................................................1

Tools needed. ..............................................................................................................1

Dash-Mounted Installation............................................................................................1

Rear-Mounted Installation (Optional) ...........................................................................2

Wiring Instructions 4

PIN Specifications for AMPSEAL Style Connection .....................................................4

Accessories ..................................................................................................................4

Configuration Information ........................................................................................................ 5

Specifications ............................................................................................................................. 6

Technical ......................................................................................................................6

Environmental ..............................................................................................................6

Mechanical ...................................................................................................................6

Mounting Templates .................................................................................................................. 7

Dash-Mount Template ..................................................................................................7

Rear-Mount Bracket Template .....................................................................................9

PV485 Connection with Power ............................................................................................... 11

(THIS PAGE INTENTIONALLY LEFT BLANK)

Hardware Installation

The following instructions will guide you through installing the PV485 display.

Inspecting Package Contents

Before attempting to install the product, it is recommended that you ensure all parts are
accounted for and inspect each item for damage (which sometimes occurs during shipping).
The items included in the box are:

Installation kit – P/N 78-00-0783 includes:

 4 (8-32) mounting studs
 4 (8-32) Keps Nuts
 1 small bag

Tools needed.

 Drill with 3/16” size bit
 Jig Saw
 Wrench or socket for (8-32) Keps nuts

Dash-Mounted Installation

Preparing the Dash

Determine the location of the PowerView 485 in the dash. Use the Installation Template
(included at the end of the manual) as a guideline to cut a hole in the dash to the specified
dimensions. Drill holes where indicated on the template for the mounting screws.

NOTE: When using the paper template from the manual, please be aware that if
you downloaded this document from the Murphy by Enovation Controls website,
the pdf file may not automatically print to scale. When submitting the file for print,

you will need to select “None” for Page Scaling. Check the accuracy of the

printed template by verifying the measurements labeled on the template are
correct.

If this manual was supplied with your product, the template will be correct.

Section 78 00-02-1018
2017-05-23 - 1 -