Murphy AL-02058B, J1939 User Manual

AL-02058B page 1 of 2

Description

The iGUARD™ is one controller for all your
engine-driven generator set applications. It is
designed from the ground up to work with
today’s electronic engines, accepting the J1939
protocol. The iGUARD™ also works with non­electronic engines.
Designed to meet NFPA-110 and NFPA-99
requirements the iGUARD™ has ample inputs
and outputs.
The new iGUARD™ controller can be used for
all gen-set applications: single-phase or three­phase, and 12 or 24 V.
Engine speed can be read from a magnetic
pickup,AC generator frequency, or J-1939
CANbus.

Programming Updates in the Field

Because the microprocessor is flash-based, the
controller can be easily re-programmed or
updated using a PC in the field.

Applications

• Packagers and OEM

• Rental Companies

• Prime Power

• Hospitals

• Ground Support Equipment

• Agriculture

• Marine

iGUARD Standard Components

–

24 - Digital inputs

–

8 - Analog inputs (one dedicated for
battery)

–

Inputs for up to three phases and neutral
of AC voltage

–

Inputs for 3 CT’s for current monitoring

–

1 - Magnetic pickup input

–

8 - 20A Form “C” relays

–

1 - RS232 port

–

1 - RS485 port

–

1 - RS232/RS485 port

–

1 - J1939 port

–

1 - 64 x 128 pixel full graphic LCD with
backlight

–

1 - 12 position keypad

Mounts in Several Ways

• Standard set-top

• Alternator mounting

• In existing enclosures

Specifications

Mounting (Cut-out) Dimensions:

7.05 x 5.25 x 2.76 in. (179 x 133 x 70 mm)

Mounting Screws:
4, #6-32 screws and nitrile rubber o-ring are
supplied to meet NEMA4 specs.

Case Material:

Black Polycarbonate, textured finish, UV stabilized.

Connection:

600V rated multi-wire quick connect for DC and
AC connections, suitable for wire harnessing.

Power supply:

Operates from any DC supply for 8-35VDC
continuous. Brownout (5V) ridethrough is 5
seconds and a total blackout (0V) ridethrough of
100 milliseconds.

Vibration/Survivability:

3g, 3 axis, frequency swept 10-1000 Hz.

Operating and Storage Temperature Range:

–40/+185°F (–40/+85°C).

LCD Operating Range:

–4/+176°F (–20/+70°C).

I/O’s:

Expansion relay board available for additional
I/O.

Shipping Dimensions:

10 x 9 x 6 in. (254 x 229 x 152 mm)

Shipping Weights:

2 lb. (910 g.).

Performance Specs

NFPA-110, NFPA-99

SAE Load Dump Test

Approvals

UL/CUL Recognized component as
stand alone controller.

UL/CUL Listed when sold in
conjunction with Murphy
supplied harness.

AL-02058B

Revised 11-05

Catalog Section 75

DIGITAL GENERATOR SET CONTROLLER

iGUARD™Gen-Set Controller

■

SAE J1939 Compatible. Reads this

common SAE protocol used on newer
electronic engines.

■

Universal. This controller fits any

standard gen-set application. Simplify
your life with only one controller to learn
and stock.

■

Designed to meet NFPA110/NFPA 99

■

Unmatched Price. No other controller

has these features at a comparable price.

R

CUS

LISTED

®

CUS

AL-02058B page 2 of 2

Current Transformer

Wire Harnessing

Senders and End Devices

Typical Dimensions iGuard™ Accessories

Specify:

iGUARD™

Digital Generator Set Controller.

How to Order:

75-00-0074 4-position power connector; 12 ft (3.65 m) wire leads.
75-00-0075 10-position comm. connector—J1939, RS232, RS485; 12 ft. (3.65 m) wire lead
75-00-0076 10-position communications connector - RS232, RS485
75-00-0077 Digital Inputs 1-8; 12 ft. (3.65 m) wire leads 12 ft. (3.65 m) wire leads
75-00-0078 Digital Inputs 9-24; 12 ft. (3.65 m) wire leads
75-00-0079 Analog Inputs, Magnetic Pickup; 12 ft. (3.65 m) wire leads
75-00-0080 ESD Jumper; 0.2 feet (61 mm) wire leads
75-00-0081 AC Voltage connector; 12 ft. (3.65 m) wire leads
75-00-0082 AC Current connector; 12 ft. (3.65 m) wire leads

05-70-1858 0-100 psi Oil pressure sender
10-70-2013 300 °F (150°C) Coolant temperature sender
15-70-0116 EL150K1 Coolant level indicator and low Coolant level shutdown
15-70-0104 L129 high/low Oil level indicator and shutdown
15-70-0660 LM2000 Engine oil replenisher and low oil level shutdown
05-70-6345 PXMS-100 4-20mA Pressure sender 100 psi

00-00-2592 50:5A Current transformer, 12 inch (305 mm) leads
00-00-2707 60:5A Current transformer, 12 inch (305 mm) leads
00-00-4893 75:5A Current transformer, 12 inch (305 mm) leads
00-00-2372 100:5A Current transformer, 12 inch (305 mm) leads
00-00-2484 150:5A Current transformer, 12 inch (305 mm) leads
00-00-2485 200:5A Current transformer, 12 inch (305 mm) leads
00-00-2486 300:5A Current transformer, 12 inch (305 mm) leads
00-00-2487 400:5A Current transformer, 12 inch (305 mm) leads
00-00-2488 500:5A Current transformer, 12 inch (305 mm) leads
00-00-2489 600:5A Current transformer, 12 inch (305 mm) leads
00-00-2490 800:5A Current transformer, 12 inch (305 mm) leads
00-00-2441 1000:5A Current transformer, 12 inch (305 mm) leads
00-00-2441 1000:5A Current transformer, 12 inch (305 mm) leads
00-00-2516 1200:5A Current transformer, 12 inch (305 mm) leads
00-00-2517 1500:5A Current transformer, 12 inch (305 mm) leads
00-00-2504 1600:5A Current transformer, 12 inch (305 mm) leads
00-00-2518 2000:5A Current transformer, 12 inch (305 mm) leads
00-00-2519 3000:5A Current transformer, 12 inch (305 mm) leads

Part Number Description

Part Number Description

Part Number Description

Warranty

A limited warranty on materials and workmanship is
given with this FW Murphy product. A copy of the
warranty may be viewed or printed by going to
www.fwmurphy.com/support/warranty.htm

INDUSTRIAL PANEL DIVISION

P.O. Box 470248
Tulsa, Oklahoma 74147 USA
[phone] fax [phone]
e-mail [e-mail]

MURPHY DE MEXICO, S.A. DE C.V.

Blvd. Antonio Rocha Cordero 300, Fracción del Aguaje
San Luis Potosí, S.L.P.; México 78384
[phone] fax [phone]
Villahermosa Office [phone]
e-mail [e-mail]
www.murphymex.com.mx

FRANK W. MURPHY, LTD.

Church Rd.; Laverstock, Salisbury SP1 1QZ; U.K.
[phone] fax [phone]
e-mail [e-mail]
www.fwmurphy.co.uk

In order to consistently bring you the highest quality, full featured products, we reserve the right to change our specifications and designs at any time.

FW Murphy

P.O. Box 470248
Tulsa, Oklahoma 74147 USA
[phone] fax [phone]
e-mail [e-mail]

www.fwmurphy.com

Printed in U.S.A.

FRONT

7.787 in. (198 mm)

8.499 in. (216 mm)

BACK

SIDE

6.667 in.

(170 mm)

0.72 in.

(18 mm)

2.04 in. (52 mm)

2.76 in. (70 mm)