Murphy GSDVDH2002 Instruction Manual

Full Size HDMI DVD Player

Instruction Manual

Model Number: GSDVDH2002

Please read these instructions carefully and keep for future reference

For Customer Services & Spare Parts please call 01204 664 084

Opening times: Monday – Friday 9am until 5pm

1

1. SAFETY

x PLACE THE APPLIANCE ON A FLAT, STABLE SURFACE WITH ADEQUATE VENTILATION AND AWAY

FROM OTHER SOURCES OF HEAT. MINIMUM DISTANCES AROUND THE APPLIANCE FOR
ADEQUATE VENTILATION IS 10CM. DO NOT COVER OR RESTRICT VENTILATION OPENINGS.

x CHILDREN SHOULD BE SUPERVISED TO ENSURE THEY DO NOT PLAY WITH THE APPLIANCE,

AND THE APPLIANCE AND CABLE SHOULD BE KEPT COMPLETELY OUT OF REACH OF YOUNG
CHILDREN.

x THIS APPLIANCE IS NOT DESIGNED FOR USE BY CHILDREN, OR PERSONS WITH REDUCED

PHYSICAL, SENSORY OR MENTAL CAPABILITIES, AND SHOULD NOT BE USED BY SUCH PERSONS
UNLESS THEY CAN DO SO SAFELY. WHERE NECESSARY, SUCH PERSONS (OR ANYONE WITH
LACK OF EXPERIENCE OR KNOWLEDGE) SHOULD FIRST BE GIVEN SUPERVISION OR
INSTRUCTION CONCERNING USE OF THE APPLIANCE BY A PERSON RESPONSIBLE FOR THEIR
SAFETY.

x CAUTION: REMEMBER NEVER LOOK DIRECTLY INTO THE LASER SOURCE.
x FULLY UNWIND THE CABLE BEFORE PLUGGING IN AND ENSURE THE CABLE IS POSITIONED

AWAY FROM AREAS WHERE IT IS LIKELY TO GET DAMAGED OR CAUSE A TRIP HAZARD.

x DO NOT OPERATE THE APPLIANCE IF DAMAGED OR AFTER IT MALFUNCTIONS. IN THE EVENT

THE SUPPLY CORD IS DAMAGED, IT MUST ONLY BE REPLACED BY A QUALIFIED SERVICE
ENGINEER, WITH A SUITABLY APPROVED PART.

x DO NOT PULL ON CABLE TO DISCONNECT FROM MAINS SUPPLY.
x KEEP APPLIANCE, CABLE AND PLUG DRY AND AWAY FROM AREAS WHERE IT IS LIKELY TO GET

SPLASHED. AVOID USING IN HOT, HUMID ENVIRONMENTS.

x DO NOT PLACE ITEMS WITH NAKED FLAMES OR CONTAINERS WITH LIQUIDS ON THIS

APPLIANCE.

x SWITCH OFF AND UNPLUG WHEN NOT IN USE AND BEFORE CLEANING OR SERVICING THE

APPLIANCE. SERVICING OF THIS APPLIANCE MUST ONLY BE CARRIED OUT BY A QUALIFIED
ELECTRICIAN.

x ALWAYS ENSURE THE MAINS PLUG IS READILY UNPLUGGABLE – DO NOT USE WITH ‘LOCKABLE’

SOCKETS OR PERMANENTLY WIRE TO MAINS.

The exclamation point within an
equilateral triangle is intended to alert
the user to presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance

LASER SAFETY

This unit employs an optical laser beam system in the CD
mechanism, designed with built -in safeguards. Do not
attempt to disassemble, refer to qualified service personnel.
Exposure to this invisible laser light beam may be harmful to
the human eye.

THIS IS A CLASS-1 LASER PRODUCT. USE OF
CONTROLS, OR ADJUSTMENTS OR PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN, MAY RESULT
IN HAZARDOUS LASER LIGHT BEAM EXPOSURE.

INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCK
FAILED OR DEFEATED.
AVOID DIRECT EXPOSURE TO
LASER BEAM.

WARNING: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE, REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.

The lightning flash with arrow-head
symbol, within an equilateral triangle, is
intended to alert the user to the
presence of uninsulated "dangerous
voltage" within the product's enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock.

For Customer Services & Spare Parts please call 01204 664 084 Opening times: Monday – Friday 9am until 5pm

2

2. COMPATIBILITY 3. EXPLANATION OF DVD SYMBOLS
This DVD player is compatible with the following disc types

DVD 8 & 12cm Single sided, single and doubled layered
8 & 12cm Double sided, single layered

CD – DA 8 & 12cm discs

CD-R / CD-RW

CD – Kodak picture

4. PARTS

DVD PLAYER

Region code

Dolby Digital Surround

Number of Audio Tracks

Number of Sub-titles

Screen Format

Angle Indicator

FRONT PANEL INFORMATION:

REAR PANEL INFORMATION:

12 34

56789

1. Power Button

2. Disc tray

3. LED Display

4. Remote receiver

5. Open/Close Button

6. Play/Pause Button

7. Stop Button

8. Prev Button

9. Next Button

1 2 3 4 5 6 7

1. AC power cord

2. Scart

3. Left audio output Jack

4. Right audio output Jack

5. Video output

7. Digital coaxial audio output Jack

6. HDMI ou

For Customer Services & Spare Parts please call 01204 664 084 Opening times: Monday – Friday 9am until 5pm

t put

output

3

5. REMOTE CONTROL

5.1 Remote Control - functions

PBC

1

2

3

4

5

6

7

8

9

10

11
12

13

14

15

16

17

18

19

20

21

22

23
24

25
26

27
28

1.OPEN/CLOSE
Press to open and close the disc drawer.

2.DISPLAY

file or disc.

3.0-9Number Keys

4.TITLE

Press to access a loade d DV D’s title menu.

5.SUBTITLE

Select and turns the su bt it les on and off.

6.MENU

Press to access the men u of t he disc.

7.DIRECTION (▲▼◄►) /ENTER
Press to navigate a loa de d DV D menu or the

setup menu and make sel ec ti ons.

8.F.BWD/F.FWD
To perform fast reverse / fast forward
playback.

9.PLAY/PA USE
Starts playing or pau se s a di sc.

10.VOLUME

Press to adjust the vol um e.

11.STOP

Press to stop a DVD or CD dur in g pl ay.

12.VIDEO
To change the video outpu t mo de t o

CVBS / RGB.

13.PROG

14.STEP

Press to skip forward t hr ou gh a loaded DVD
one frame at a time.

15.L/R
Press to change the aud io o ut put to

L/L, R/R or L/R.

16.N/P
Press the change the output signal

to NTSC / PAL / AUTO.

17.ON/STBY

Turns the power on or rest or es t he
DVD player to standby m od e.

18.TIME
Goto a specific time in de x.

Display detailed informations of the current

DISPLAY

VIDEO

STEP

ON/STBY

19.LANGUAGE
Changes the language.

(if diff er en t modes are available )

20.ANGLE

Accesses diffe re nt camera angles.

21.SETUP

Press to access the set up m en u.

22.PREV/NEXT

To skip to the prev io us / n ext title /
chapter / track.

23.MUTE

Cuts and restores the v ol ume.

24.ZOOM

To enlarge a pict ur e on t he screen.

25.A-B

Press to repeat a speci fi ed s ection of a
loaded DVD.

26.PBC

Open the VCD main menu.

27.REPEAT

Changes the repeat mo de .

28.SLOW

Press to view the loade d DV D in s low motion.

A-B

N/PL/R

For Customer Services & Spare Parts please call 01204 664 084 Opening times: Monday – Friday 9am until 5pm

PROG Permits a list of chapters selected to

be played in sequence.

5.2 Remote control - installing the batteries

5.2.1 Open the battery compartment cover on the reverse of the remote
control.

5.2.2 Insert 2 x AAA 1.5V alkaline batteries in accordance with the diagram
in the battery compartment. Take care to observe the correct polarity
(+ and -) and refit the cover.

5.2.3 Do not expose the battery or the installed battery to excessive heat
(e.g. fire, sunshine or position close to radiators etc.).

Note

x Dispose of batteries responsibly at local authority household waste recycling facility.
x DO NOT dispose of batteries in a fire as the batteries may explode.
x Only use ‘AAA’ 1.5V batteries in this appliance.
x Be sure to insert correctly taking care to observe the correct polarity (+ and -).
x Use only batteries of the same or equivalent type as recommended.
x Do not recharge non-rechargeable batteries.
x If rechargeable batteries are used with this product they must be removed before being recharged.
x Never mix old and new batteries (replace all batteries at the same time).
x Never try to dismantle batteries.
x Do not short-circuit the supply terminals.
x Always remove exhausted or dead batteries from the product; do not dispose of in fire.
x Remove batteries from the product before extended storage.

4

AAA

AAA

+

-

+

-

For Customer Services & Spare Parts please call 01204 664 084 Opening times: Monday – Friday 9am until 5pm

5.3 Remote control - use

To use the remote control unit, insert batteries into the battery compartment of the remote control unit.
Ensure that the ON/STBY
transmitter on the remote control towards the remote control sensor on the DVD player and press the
function button of choice. Allow time for the remote to respond before pressing another button.
Use the remote handset no more than 6m from the remote sensor and at an angle of no greater than 30°.

player ar buttons on the TV and DVD e switched on. Point the infrared

Decorder of Amplier with

Dolby Digital or MPEG

Coaxial Cable

(not included)

To audio inputs
of the amplier

6.1

Connecting to an Audio Receiver with a Coaxial

Cable

5

6.2

CAUTION !

ALL EQUIPMENT MUST BE TURNED OFF AND DISCONNECTED FROM THE MAINS BEFORE

INSTALLATION

For Customer Services & Spare Parts please call 01204 664 084 Opening times: Monday – Friday 9am until 5pm

Yellow

Yellow

Connecting to a TV with an AV Cable.

6.3

CAUTION !

ALL EQUIPMENT MUST BE TURNED OFF AND DISCONNECTED FROM THE MAINS BEFORE

INSTALLATION

Connecting to a TV with a SCART Cable

Television

To SCART

output

SCART Cable

(not included)

To SCART
input

6

For Customer Services & Spare Parts please call 01204 664 084 Opening times: Monday – Friday 9am until 5pm

7

6. CONNECTING DVD PLAYER - continued

7. CONFIGURE THE TV

The DVD player is set to UK PAL TV type as standard; if NTSC is required, see section 19 for set up.

7.1 Place the DVD player horizontal on a flat level surface.

7.2 Connect the DVD player to your TV and / or audio system (as shown in the previous diagrams), plug in

and switch on at the mains. The blue power light will illuminate.

7.3 Insert the batteries into the remote control.

7.4 Press the STANDBY button on the DVD player to turn on the player and turn on the TV and amplifier (if

connected).

7.5 Select the video mode (AV) for the TV. If there is more than one video channel (AV1, AV2, etc) select the

source that the DVD player is connected to. See the TV instruction manual for tuning instructions if the set
does not automatically tune.

CAUTION !

ALL EQUIPMENT MUST BE TURNED OFF AND DISCONNECTED FROM THE MAINS BEFORE

INSTALLATION

To HDMI
input

To HDMI
output

Television

For Customer Services & Spare Parts please call 01204 664 084 Opening times: Monday – Friday 9am until 5pm

IMPORTANT NOTE:

When connected via the HDMI cable, to get the picture and sound, you may need to select the HDMI input

on your TV with the TV remote control.

8

8. PLAYING A DISC

8.1 Playing a disc - DVD

8.1.1 Switch on the DVD player at the mains, turn on the TV and amplifier ( if

) button.

8.1.2 Press the OPEN / CLOSE (

) button (‘open’ will appear on the TV screen) and insert a disc (label side up).
For a double-sided disc place the disc with the A/1 up. Press the button again to close the disc tray (‘close’
will appear on the TV screen).

8.1.3

8.1.4 The DVD menu / title will be displayed on screen where the casting information, product history, movie
introduction etc. can be accessed.

8.1.5 Using the NAVIGATION (Í Ð Î Ï) buttons, highlight the desired feature or enter the number of the
chapter using the number (0-9) buttons and then press the ENTER button to confirm the selection. The
disc will now start to play.

8.1.6 To pause the play, press the PAUSE () button, the pause indicator () will appear on the TV screen to
show that pause mode has been selected. Press the PLAY () button, the play indicator () will appear
on the TV and the disc will resume playing at the point that the disc was paused.

8.1.7 To stop play

x Press the STOP () button ONCE, to stop the disc playing, the stop indicator (

I) will appear on the TV

screen. If the PLAY () button is pressed the disc will resume playing at the point at which it is stopped.

x Press STOP button TWICE, to stop the disc playing, the stop indicator () will appear on the TV screen to

show stop has been selected. If the PLAY ( ) button is pressed the disc will restart at the beginning.

8.1.8 To adjust the volume to the desired level using the VOL (+ or -) buttons. The volume will appear on the
screen. The sound can be silenced by pressing the MUTE button on the remote control and the mute
indicator ‘

’ will appear in the upper left hand corner of the screen. Press the MUTE button a second time

to restore the sound.

8.1.9 To place the DVD player into standby mode, press the ON/STBY(

) button.

To turn the DVD player

8.2 Playing a disc - CD

8.2.1 Switch on the DVD player at the mains , turn on the TV and amplifier (if

connected) and press the ON/STBY

( ) button.

8.2.2 Press the OPEN / CLOSE (

) button (‘open’ will appear on the TV screen) and insert a disc (label side up).
For a double-sided disc place the disc with the A/1 up. Press the button again to close the disc tray (‘close’
will appear on the TV screen).

8.2.3 The unit will take a few seconds to download the initial data from the disc, the TV screen will show ‘loading’
and the CD will automatically start and CD disc menu will be displayed on the screen.

8.2.4 To pause the play, press the PAUSE ( )button, the pause indicator () will appear on the TV to show
that pause mode has been selected. Press the PLAY ( ) button to resume playing at the point that the
disc was paused.

8.2.5 To adjust the volume to the desired level using the VOL (+ or -) buttons. The volume will appear on the
screen. The sound can be silenced by pressing the MUTE button on the remote control and the mute
indicator ‘

’ will appear in the upper left hand corner of the screen. Press the MUTE button a second time

to restore the sound.

8.2.6 To select a specific track to be played, enter the track number directly and the disc will start to play from
the track selected. Alternatively use the UP / DOWN (ÏÐ) buttons to highlight the desired track and then
press the ENTER button.

8.2.7 To activate the repeat function either use the REPEAT button (see section 11) or highlight REPEAT in the
menu using the NAVIGATION (Í Ð Î Ï) buttons and press the ENTER button repeatedly until the
desired repeat option (track, all CD or off) is displayed.

8.2.8 To activate the random or intro functions highlight MODE on the screen using the NAVIGATION
(Í Ð Î Ï) buttons and press the ENTER button.

x Press the ENTER button ONCE, to activate the random function. ‘Shuffle on’ will be displayed and the

next track will be randomly selected from the CD.

x Press the ENTER button TWICE to deselect the random function and activate the intro function. ‘Intro’ will

be displayed and the first 10 seconds of the track will play. When the desired track has been located,
press the ENTER button again and ‘normal’ will be shown in the display.

8.2.9 To stop play

x Press the STOP () button ONCE, to stop the disc playing, the stop indicator (

I

) will appear on the TV

screen. If the PLAY () button is pressed the disc will resume playing at the point at which it is stopped.

x Press STOP button TWICE, to stop the disc playing, the stop indicator () will appear on the TV screen to

show stop has been selected. If the PLAY () button is pressed the disc will restart at the beginning.

8.2.10 To place the DVD player into standby mode, press the ON/STBY (

To turn the DVD player

off at any time switch off at the mains.































) button.

For Customer Services & Spare Parts please call 01204 664 084 Opening times: Monday – Friday 9am until 5pm

The unit will take a few seconds to download the initial data from the

disc, the TV screen will display ( )

LOADING in the top left corner.

connected ) and press the

ON/STBY (

off at

any time switch off at the mains.

9

8.3 Playing a disc – picture CD

8.3.1 Switch on the DVD player at the mains

, turn on the TV and amplifier (if

) button.

8.3.2 Press the OPEN / CLOSE (

) button (‘open’ will appear on the TV screen) and insert a disc (label side up).
For a double-sided disc place the disc with the A/1 up. Press the button again to close the disc tray (‘close’
will appear on the TV screen).

8.3.3 The unit will take a few seconds to download the initial data from the disc, the TV screen will show ‘loading’
and the disc will automatically start and a menu of the pictures on the disc will be displayed with a small
insert picture.

8.3.4 Press the ENTER button to start a slide show of the pictures on the disc.

8.3.5 Press the PAUSE ( ) button to pause on a particular picture and the pause indicator () will be displayed.
Press the PLAY ( ) or NEXT () buttons to restart the slide show.

8.3.6 Press the NEXT () button to advance to the next picture or the PREV () button to return to the previous
picture.

8.3.7 To rotate or flip a picture on the screen press the NAVIGATION (Í Ð Î Ï) buttons when viewing the
picture CD.

8.3.8 To select a specific picture, enter the picture number directly using the number buttons and the disc will
start to play from the picture selected.

8.3.9 After all pictures have been displayed, the slide show will stop and display will return to the disc menu.

8.3.10 To activate the repeat function press the REPEAT button

x Press the REPEAT button ONCE, to display the same picture continuously. The repeat indicator (repeat

single) will appear on the TV screen.

x Press the REPEAT button TWICE to repeat all pictures on the CD continuously. The repeat indicator

(repeat folder) will appear on the TV screen.

x Press the REPEAT button once more to turn off the repeat function. ‘Repeat off’ will appear on the TV

screen temporarily

8.3.11 To activate the random function highlight MODE on the screen using the NAVIGATION (Í Ð Î Ï)
buttons and press the ENTER button repeatedly until ‘shuffle on’ is displayed. Press the PLAY ( ) button
to start a slide show and the next picture will be randomly selected from the disc. To deselect the random
function, return to the disc menu, highlight mode and press the ENTER button and ‘normal’ will be shown in
the display.

8.3.12 To stop play and return to the menu press the STOP () button.

8.3.13 To place the DVD player into standby mode, press the ON/STBY (

) button.

To turn the DVD player

off at any time switch off at the mains.

9. SKIP AND FAST SEARCH FUNCTIONS

9.1 To move forward to the next chapter or track on the disc, press the NEXT () button. Press again to

move to each successive chapter / track.

9.2 To return to the beginning of the chapter / track or move to the previous chapter / track; press the

PREV () button. Repeat to move to each previous chapter / track / picture.

9.3 To search forward at speed, press the FAST FORWARD () button. Press again to increase the search

speed in the sequence below.

9.4 To search backward at speed, press the FAST BACKWARD () button. Press again to increase the

search speed.

9.5 When viewing DVD, press the SLOW button to select slow-motion forward at 1/2, 1/4, 1/6, 1/8 normal

speed without sound.

Note

x A DVD will not advance or reverse during the ‘Warning’ section of a disc.
x The player is muted during search mode.
x The fast-forward / back functions are not available for picture CDs.
x Skip and fast search functions may not be available when in pause or stop modes.

10. STEP FUNCTION

10.1 To advance the DVD frame by frame, press the STEP button. The first press of the button freezes the

frame and each subsequent press advances the DVD by one frame. The step indicator ( ) will be
displayed on the screen.

10.2 Press the PLAY () button to resume playing at the point that the DVD was paused.

















For Customer Services & Spare Parts please call 01204 664 084 Opening times: Monday – Friday 9am until 5pm



connected) and press the

ON/STBY (

11. REPEAT PLAY FUNCTIONS (in play mode)

11.1 To repeat a DVD chapter, title or CD track continuously, press the REPEAT button.

x Press the REPEAT button ONCE, to repeat the same DVD chapter or CD track continuously.
x Press the REPEAT button TWICE to repeat the DVD title or all tracks of the CD continuously.
x Press the REPEAT button once more to turn off the repeat function. ‘Repeat off’ will appear on the TV

screen temporarily.

11.2 To repeat between two specific points on a DVD (not CD) disc.

x Press the A - B button at the start of the section to be repeated. The repeat indicator (Rep A-) will appear

on the TV screen.

x Press the A - B button again at the end of the section. The repeat indicator (Rep A-B) will appear on the

TV screen to show that the REPEAT A-B function has been selected and the DVD or CD will be repeated
between the two points selected.

x Press A - B button once more to stop the repeat function. The repeat indicator (Rep AB off) will appear on

the TV screen briefly.

12. ZOOM FUNCTION

12.1 To enlarge the picture shown on screen, press the ZOOM button. Press repeatedly until the desired

magnification has been reached. The zoom selected will be shown in the screen.

12.2 Use the NAVIGATION (Í Ð Î Ï) buttons to adjust the position of the picture that is being viewed on

screen.

Note

x The picture quality is degraded as the zoom increases.
x The ZOOM function is not available for audio CDs.

13. ANGLE FUNCTION (not available on some DVDs)

If viewing a DVD equipped with a multi-angle feature this function allows the scene being played to be
viewed from a number of viewing angles. Press the ANGLE button to switch to the next viewing angle.
The angle being viewed will be shown on the screen. If angle function not available on the disc being
viewed then a message will appear on the TV screen.

14. LANGUAGE MENU FUNCTION (not available on some DVDs)

If listening to a DVD equipped with a multi-language feature this function allows the language of the
commentary being heard to be selected from those av

successively to switch to the next available language.

15.1 To search for a specific title, press the TIME button and use the NUMBER buttons to enter the desired

title number, press the ENTER button and play will start immediately. If listening to a CD enter the track
or time.

15.2 To search for a specific chapter, use the DOWN navigation button (Ð) to display ‘chapter’ and use the

NUMBER buttons enter the desired chapter, press the ENTER button and play will start immediately.

15.3 To search for a specific title time, use the DOWN navigation button (Ð) to display ‘time’ and use the

NUMBER buttons to enter the desired time (hour/minutes/seconds). Press the ENTER button and play
will start immediately.

16. SUBTITLE FUNCTION (not available on all DVDs)

If viewing a DVD equipped with a multi-subtitle feature this function allows a subtitle to be selected from
those available on the disc. Press the SUBTITLE button successively to switch to the next available
subtitle. The subtitle selected will be shown on the screen.

17. PROGRAMMED PLAYBACK

This function allows a DVD to be programmed and played from a specific title or chapter.

17.1 Press the PROG button to display the programmed play screen.

17.2 Use the LEFT (Í) button to move to the left hand side of the screen and highlight the title field.

17.3 Enter the first title and chapter number to be played using the number buttons in the highlighted field. Use

the NAVIGATION (Í Ð Î Ï) button to move to the next field when the number has been entered.

17.4 Add the next title and chapter numbers to be watched and continue until all the desired title and chapters

have been programmed.

17.5 When all chapters have been programmed use the NAVIGATION (Í Ð Î Ï) buttons until ‘play’ is

highlighted and then

press the ENTER button to start play.

17.6 The programmed chapters will play in sequence and the DVD player will stop automatically after all the

programmed titles / chapters have played.

10

For Customer Services & Spare Parts please call 01204 664 084 Opening times: Monday – Friday 9am until 5pm

ailable on the disc. Press the LANGUAGE

button

The language selected will be shown on the

screen.

15. TIME FUNCTION

This function allows a disc to be played from a specific title, chapter, track

or picture. Options available will

vary for each disc.

11

18. QUICK ACCESS BUTTONS

MENU Press the MENU button to display the

desired option. Press the button again to resume play.
TITLE Press the TITLE button to return to t
SET UP Press the SETUP button to display the set up menu. See section 19 for further explanation.

being played. Press DISPLAY button repeatedly to

disc

scroll through the displays in the

sequence

below. Press the DISPLAY button seven times to clear the display and return to

normal viewing.

For Customer Services & Spare Parts please call 01204 664 084 Opening times: Monday – Friday 9am until 5pm

19. SET UP MENU (in play or stop modes)
Various features of the player can be changed in the set up menu.

19.1 Press the SETUP button and the general set up menu is displayed.

19.2 Use the UP / DOWN buttons (ÏÐ) until the desired feature is displayed. Use the RIGHT (Î) to enter the

feature menu.

19.3 Use the UP / DOWN buttons (ÏÐ) until the desired function is highlighted and press the ENTER button to

enter the option submenu for this function.

19.4 Use the UP / DOWN buttons (ÏÐ) to navigate to the desired option and press the ENTER button to

select and confirm.

19.5 Use the LEFT (Í) button to move to another feature or press the SET UP button to exit this function.

the

DVD root, CD or picture CD menu and select

title menu and select the desired option. he DVD

OSD Press the DISPLAY button to display a summary of play settings on the screen for the DVD

SET UP MENU
/ FEATURE

SUB MENU /
FUNCTIONS

OPTIONS DEFAULT

SETTING

Explanation

Language English

Français
Español
Deutsch
Italian

English Sets the language of the display menus Language

Aspect ratio 4:3

16:9

4:3 Sets the aspect ratio – choose the aspect that

corresponds to the TV the player is connected to.

TV System NTSC

PAL

Auto

PAL Selects the video system

Video out

RGB
HD

HD Selects the video source output

Video

480p / 576p
720p
1080i
1080p

Auto Sets the definition of the video output signal

Audio

Digital Output

Off
PCM

PCM Output coded signal as Shown.

Parental

control

1. Kid Safe

2. G

3. PG

4. PG-13

5. PG-R

6. R

7. NC-17

8. Adult

8 Adult Select to set censorship level of programmes

viewed without a password being entered.

Rating

Set password 8888 Select to change password.

Yes
No

Select to return to the default OSD settings. Misc

Screen saver Off

On

On Select to switch screen saver function on or off. If

screen saver function is switched on the screen will
go blank after approximately 3 minutes without DVD
activity.

Use Default

Settings

Portuguese

Nederlande

12

For Customer Services & Spare Parts please call 01204 664 084 Opening times: Monday – Friday 9am until 5pm

French
Spanish
German

Italian
Portuguese
Dutch

English

Auto
Off

Subtitle Off

French

Spanish

German

Italian
Portuguese
Dutch

English

Audio

English

RAW

Sets the language being heard

Sets the language of the subtitles

DVD menu Varies by disc English Sets the language of disc menu

HD resolution Auto

13

20. SETTING THE PARENTAL LOCK

Some DVD’s have a parental level assigned to the complete disc or particular scenes on the disc. This
feature allows the viewing limit to be set and settings are region specific. To activate the parental settings

20.1 Press the SETUP button, use the UP / DOWN buttons (ÏÐ) to display the RATING menu.

20.2 Use the RIGHT (Î) button to highlight the parental control feature and then press the ENTER button.

20.3 Using the NUMBER buttons, enter the password (default setting is 8888) and press the ENTER button to
confirm. If the correct password has been entered the screen will briefly display ‘correct password’.

20.4 Use the ENTER button or the RIGHT (Î) button to display the rating options available.

20.5 Use the UP / DOWN buttons (ÏÐ) to highlight the parental rating of choice and press the ENTER button to
confirm. The parental lock and viewing level have now been set.

20.6 If the rating on a DVD is higher than the parental rating set, the DVD will display a screen and it will
necessary to enter the password before the disc will play.

Note
Kid safe Suitable for all ages but especially for young children.

ʳ

G Suitable for all ages.ʳ
PG Contains mature themes, may not be suitable for small children under 8 years old.ʳ
PG13 Contains mature themes, may not be suitable for children under 13 years old.ʳ
PGR Recommended that parents restrict children under 17 from viewing or only view only when supervised by a

parent or adult guardian.

ʳ

R Contains mature themes (usually sex and/or violence). Children under 17 not admitted without an adult.ʳ
NC17 No children under age 17; not recommended for children under age 17.ʳ
ADULT Material to be viewed only by adults due to graphic sexual scenes, violence or language.

ʳ

21. CHANGING THE PASSWORD

21.1 Press the SETUP button and use the UP / DOWN buttons (ÏÐ) to display the RATING menu.

21.2 Use the RIGHT (Î) button to enter the rating menu then use the UP / DOWN buttons (ÏÐ) to highlight
SET PASSWORD and press the ENTER button to enter this option.

21.3 Use the NUMBER (0-9) buttons and enter the default / old password (default password is 8888) and press
the ENTER button to confirm.

21.4 With SET PASSWORD still highlighted press the ENTER button again. ‘New password’ will be displayed
and use the NUMBER buttons to enter a new password. Press the ENTER button again and ‘Confirm’ will
be displayed.

21.5 Re-enter the new password and press the ENTER button to confirm. ‘Set password successful’ will be
displayed and the new password is now set.

Note See troubleshooting section for action to be taken for forgotten passwords.

22. CARE AND MAINTENANCE

DVD player

x Wipe with a soft cloth. If the cabinet is very dirty, unplug from the mains and dampen the cloth with a weak

solution of washing up liquid and water and wipe clean. Allow it to dry thoroughly before using.

x Should it become necessary to replace the fuse in the plug, please replace with a 3A fuse that conforms

with BS 1362.

Caring for discs
To obtain the best sound and picture quality from discs treat with care. Dirty, scratched or warped discs will
cause broken or intermittent sound and pictures.

x Store discs in their original cases and avoid using in dusty environments
x When holding the disc, take care not to touch the playing surface.
x Do not place the discs in warm or sunny locations
x Never write on the playing surface of the disc or on the label surface with a ballpoint pen.
x Do not stick labels onto discs.
x Do not bend discs.
x Wipe any dust or fingerprints form the disc using a soft cloth. Wipe from the centre of the disc to the

outside and never in a circular motion. Do not use conventional record cleaners, anti static agents,
benzene, thinners or solvents.

For Customer Services & Spare Parts please call 01204 664 084 Opening times: Monday – Friday 9am until 5pm

23. TROUBLESHOOTING GUIDE

Observation Potential cause / solution

No power (blue front panel
light does not come on)

Is the power lead connected to the mains socket correctly?
Does the socket that is being used have power?

The remote control does
not work

Are the batteries exhausted?
Have the batteries been correctly fitted?
Are there obstacles in the between the remote and the sensor on the DVD player?

Is the remote too far away from the sensor?
The DVD player does not
play

Has the standby button been pressed?

Has the disc been loaded upside down?

Is the region code of the disc compatible with the DVD player?

Is the disc type compatible with the DVD player?

Is the DVD rating above the parental level set?

Is the disc dirty or damaged?

No picture Is the TV set switched on?

Has the TV been turned to AV signal?

Are the connection cables correctly fitted and undamaged?

Has a DVD or Picture disc been inserted?

Is the disc dirty or damaged?
Picture noise / distorted Is the disc dirty or damaged?

Is the DVD player connected directly to the TV set?

Does the TV set colour controls need adjusting?

Some picture distortion is normal during rapid advance or reverse
Picture not full screen Has the correct TV display been selected for the TV being used? See set up menu - video.
No, poor, or intermittent
sound

Has the mute button on the TV been pressed?

Is the TV volume control set at minimum?

Has the TV been switched on?

Are the connection cables correctly fitted and undamaged?

Note: there is no sound output during pause / frame advance / slow and search functions
Skip / Search function
does not work

Some discs are programmed so that these functions do not work in certain sections e.g.

during warnings or during display of legal information.

Single chapter discs do not permit the use of skip function
Lost or forgotten password Enter 8888

24. TECHNICAL SPECIFICATION

24.1 Rated voltage 110-240V~ 50/60Hz
Power consumption 10W
Power consumption (standby) <1W

24.2 CD/DVD
Laser Semiconductor Laser, Wavelength 650nm
Signal system PAL, NTSC
Frequency response (audio) 20Hz to 20kHz
Signal to noise ratio (audio) >60dB (1kHz NOP, 20kHz LPF/A – filter)
Dynamic range (audio) >85dB
Harmonic distortion (audio) 0.2% (1kHz)

24.3 VIDEO
Video output 1.0V (p-p), 75 Ohm

24.4 GENERAL
Operating conditions Temperature: 5°C to 35°C
Humidity 5% to 90%
Operating position Horizontal

14

For Customer Services & Spare Parts please call 01204 664 084 Opening times: Monday – Friday 9am until 5pm

Guarantee

This product is guaranteed for 12 months from the date of original purchase.

If any defect arises due to faulty materials or workmanship, the unit will,
either be repaired, replaced or refunded at our discretion.

The following conditions apply:

» The product must be returned to the retailer with original proof of purchase.

» The product must be installed and used in accordance with the instructions
contained in this user instruction guide.

» It must be used o nly for domestic purposes.

» It does not cov er wear and tear, damage, misuse or consumable parts.

» The supplier has no responsibility for incidental or consequential loss or damage.

» Valid in the UK & Eire only.

» Valid only if purchased from the SDHS Group.

Postal Address:

Shop Direct Group

L70 1AB

Box MPRC8

For Customer Services & Spare Parts

please call 01204 664 084

Opening times: Monday – Friday

9am until 5pm

Revision 1

T

his symbol is known as the 'Crossed-out

wheelie bin S

ymbol'. When this symbol is

mar ked on a product/batteries, it means that the

product/batteries should not be

disposed

of with

your general household waste. Only discard electrical/electronic/battery items in

separate collection schemes, which cater for the recovery and recycling of mat

erials

contained within. Your co-operation is vital to

make sure the

success of these schemes

and foR the protection of the environment. For your nearest

disposal f

acility,

visit

www.recycle-more.co.uk or ask in store for det

ails.

We reserve the

right

due to

possible changes to

design to alt

er the instruction manual

without prior notice

.