Murphy EMS547 User Manual

■

Field Adjustable Parameters

■

First-Out Shutdowns and/or Alarms

■

Shutdown History File

■

Service Reminders

■

Four Communication Ports

■

External PC Card Reader and Modem Ready

■

Back Lit LCD or VFD Alphanumeric Display

Model EMS547

R

Approved for Class I, Division 2, Groups C & D areas.

EMS5-95122B

Revised 05-03

Catalog Section 40

(00-02-0102)

Electronic Monitoring
System/Controller

Description

The EMS547 Electronic Monitoring System/
Controller is micro-processor based for monitoring
and control of equipment functions. It is especially
suited to tasks requiring remote modem or SCADA
communications. Four built-in communication ports
provide a variety of communications capabilities.
Basic programs provide selectable auto or manual
start/stop and first-out shutdown for engine functions
such as pressure, temperature, level and overspeed.
Time delays for lockout during start up are included.

The EMS547 can be applied as an RTU to inter­face between SCADA applications and other con­trol platforms. It can also be used, in conjunction
with a Hayes compatible modem (9600 Baud), for
remote communications.

An external PC Card reader can be used with the
EMS547 to log data from flow meters, pressure
transmitters, electric gage senders, and other sens­ing devices. This is a popular application in the
flood control market.

Operating data is displayed on a 32 character back lit
alphanumeric liquid crystal display. An on-board
real-time clock keeps a log of equipment running
hours and alerts you when to change oil, filters and
perform other routine service.

The EMS547 operating parameters are configured
through a simple three-button interface. Access to the
system memory is controlled by entry codes.

A password-protected program uses built-in memory
to display the alarm/shutdown history, including a
display of the last ten shutdowns, when and why they
occurred, and displays all of the engine operating
conditions at time of last shutdown.

Because of the flexibility of this product, please call
one of our application specialists to see how best to
apply the EMS547. We have a growing library of
standard programs or we can write a program to your
specific needs.

Applications

●

Industrial Engines

●

Compressors

●

Electric Motors

●

Trucks

●

Generators

●

Pumps

●

Construction Equipment●SCADA

●

Remote Cellular Sites

Specifications

Input Voltage: 10 to 28 VDC.

Operating Temperature: -4 to 149°F (-20 to

65°C).

Storage Temperature: -4 to 149°F (-20 to 65°C).

Relative Humidity: 95%RH @ 60°C (140°F).

Display: Alphanumeric: 2-line, 32 character

backlit LCD (standard); VFD optional.

Communications: 2–RS485, 2–RS232 ports.

Sensor Inputs:

Digital: 4 optically-isolated inputs, (positive volt-

age or ground) such as from Murphy SWICH­GAGE®instruments.

Analog: Up to 8 inputs–will accept a variety of

resistive sending units, such as from Murphy
electric gage senders. (When resistive sending
units are used, one input will be designated for
battery voltage sensing.)

Optional: Special order analog inputs available,

including end of line 4-20 mA and 0-5 VDC.

Frequency: 1 optically-isolated input for speed

reference, such as MP3298 magnetic sensor.

Outputs:

Transistor: 7 digital; 125 mA sinking.
S449-1 Relay Board (Optional)

*:

6 Dry Relay: 4 SPST, 5A @ 30 VDC, 250

VAC, 1/10 hp @ 120 VAC; 2 DPDT, 2A @
220 VDC, 250 VAC ††.

S449-3 Relay Board (Optional)*:

2 Transistor digital: 125 mA sinking.
4 Relay: 2 SPST, 5A @ 30 VDC, 250 VAC,

1/10 hp @ 120 VAC; 2 DPDT, 2A @ 220
VDC,250 VAC ††.

Shipping Weight: 2-1/4 lb. (1 kg.).

Shipping Dimensions: 9-1/4 x 8-1/4 x 5-1/4 in.

(235 x 210 x 133 mm).

Warranty

A limited warranty on materials and workmanship
is given with this FW Murphy product. A copy of
the warranty may be viewed or printed by going to
www.fwmurphy.com/support/warranty.htm

†† One DPDT pole has common connected to battery+. N.O.

available fused and unfused.

**Not Class I, Division 2 approved.

C

R

Dimensions

EMS547 and Optional Accessories

EMS547 –V–V– A95113

Specify Program Number

Program A95113 is the basic gen-set program.
Other basic or custom programs available.

*If known. Complete model number will be

designed by Murphy when program and hardware
specifics are known.

How to Order

Specify the model number using the following example:

EMS5-95122B page 2 of 2

Display

Blank = default LCD
V = vacuum fluorescent (VFD)

Case

Blank = non-vented
V = vented case

Accessories

Required to complete the installation

Specify model number, example: EMS25RM

EMS25RM =

Rail mount DIN type terminal block

†

EMS25CAR2 =

Ribbon cable with 2 male D-subminiature connectors

†

EMS25TBCAR2 =

Ribbon cable with 1 male and 1 female D-subminiature connectors

EMS25CAS =

Male connector with 9 ft. (2.74 m) long color coded cable

EMS25MS =

Solder type male D-subminiature connector

S449-1 =

Relay board instead of S449-3 realy board.

S449-3 =

Relay board

†

Standard length ribbon cable is 2 ft. (610 mm). Specify in feet for other lengths.

Example: EMS25CAR4 (for 4 feet long).

CONTROL SYSTEMS & SERVICES DIVISION

P.O. Box 1819; Rosenberg, Texas 77471; USA
[phone] fax [phone]

e-mail [e-mail]

MURPHY DE MEXICO, S.A. DE C.V.

Blvd. Antonio Rocha Cordero 300, Fracción del Aguaje
San Luis Potosí, S.L.P.; México 78384
[phone] fax [phone]
Villahermosa Office [phone]
e-mail [e-mail]
www.murphymex.com.mx

FRANK W. MURPHY, LTD.

Church Rd.; Laverstock, Salisbury SP1 1QZ; U.K.
[phone] fax [phone]
e-mail [e-mail]
www.fwmurphy.co.uk

MURPHY SWITCH OF CALIFORNIA

41343 12th Street West
Palmdale, California 93551-1442; USA
[phone] fax [phone]
e-mail [e-mail]
www.murphyswitch.com

In order to consistently bring you the highest quality, full featured products, we reserve the right to change our specifications and designs at any time.

MACQUARRIE CORPORATION

1620 Hume Highway
Campbellfield, Vic 3061; Australia
[phone] fax [phone]

e-mail [e-mail]

FW Murphy

P.O. Box 470248
Tulsa, Oklahoma 74147 USA
[phone]

fax [phone]
e-mail [e-mail]

www.fwmurphy.com

R

E

G

I

S

T

E

R

E

D

USA–ISO 9001:2000 FM 28221

UK–ISO 9001:2000 FM 29422

Printed in U.S.A.

Front

Side

5-43/64 in.

(144 mm)

Rear

5-11/32 in.

(135 mm)

2-7/8 in.
(73 mm)

2-5/8 in.
(67 mm)

.540 in.
(13.716 mm)

4-5/16 in.
(110 mm)

8 in. (203 mm)

Clearance for Connectors

Mounting Hole

2-43/64 in.

(68 mm)

5-3/8 in.

(137 mm)

2-5/8 in.
(67 mm)

EMS547

•••••••••••••••••••••••••••

•••••••••••••••••••••••••••••••••••••••••

•

•

EMS25RM

•

14 15 16 17 18

19 20 21 22 23 24 25 26

12 34 5 6

•

•••••••••••••••••••••••••••

7 8 9 10111213

S449-3

1

11

2

12

3

13

4

14

5

15

6

16

7

17

8

18

9

19

10

20

1
2
3
4
5
6
7
8
9

10

13

25

11
12
13
14
15
16
17
18
19
20

•••••••••••••••••••••••••••

EMS25TB

S449-1

TEST AUTO

•

1

GND

14

OFF

31

21

32

22

33

23

34

24

35

25

36

26

37

27

38

28

39

29

40

30

EMS25CAR2

•

•••••••••••••••••••••••••••

EMS25TBCAR2

•••••••••••••••••••••••••••

EMS25MS

EMS25CAS

•••••••••••••••••••••••••••

•

•

•••••••••••••••••••••••••••

OFF

TEST AUTO

21
22
23
24
25
26
27
28
29
30

31
32
33
34
35
36
37
38
39
40