Murata Electronics North America 2411M Users Manual

WIT2411

2.4G Hz S pread Spectrum
Wi reless Industrial

Transceiver

Integr a t ion Gui de

(PRELIMINARY)

October 18, 2001

5375 Oakbrook Parkway

Norcross, Georgia 30093

www.cirronet.com

[phone]

Note: This unit has been tested and found to comply
with the li mits for a class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a
residential area is likely to cause harmful interference
in which case the user will be required to correct the
interference at his own expense. Commensurate with
EIRP limits specified in FCC Rules 15.247b, this
device may not be used with antennas that exceed
36dB of gain i n point-to-point applications or 16dB of

gain in multi-point applications.

If the WIT2411 is installed within another device the outside of the device into which the
WIT2411 is installed must also display a label referring to the enclosed module. The label required
for the WIT2411 module is as follows: Transmitter Module FCCID: HSW-2411M.

About This Manual

This manual is designed to allow integration of the Cirronet WIT2411 OEM module into
complete products. Care has been taken to try and make sure all of the information in this manual
is accurate. However, specifications can change over time and Cirronet cannot guarantee the
accuracy of this information. If you have any questions on any information in this manual, please
contact Cirronet Technical Support at [phone].

Cirronet is a trademark of Cirronet Incorporated. All other trademarks belong to their respective companies.