Murata Electronics North America 2410M Users Manual

FCC ID: HSW-2410M

SECTION 4

USER'S MANUAL

FCC ID: HSW-2410M

The following statement will be placed in the front of the users manual:

Notice to users/installers using the 24 dBi parabolic dish antenna in conjunction
with the WIT2410 module. FCC rules limit the use of this antenna, when connected to the

WIT2410 module, to point-to-point applications only. It is the responsibility of the installer
to ensure that the system is prohibited from being used in point-to-multipoint applications,
omnidirectional applications, and applications where there are multiple co-located
intentional radiators transmitting the same information. Any other mode of operation using
this antenna is forbidden.

In order to meet FCC’s MPE requirements, Cirronet Corporation will add the following
statements to the users manual

Information to user/installer regarding FCC’s Maximum Permissible Exposure (MPE)
limits. The field strength radiated by any approved antennas, when connected to a

transmitting WIT2410 module, may exceed FCC mandated RF exposure limits. FCC rules
require professional installation of these antennas in such a way that the general public will
not be closer than 26 cm from the radiating aperture of any of these antennas. End users
of these systems must also be informed that RF exposure limits may be exceeded if
personnel come closer than 26 cm to the apertures of any of these antennas.