Munters Wind Sensor Installation Manual
Installation Manual
Wind
Sensor
Installation
Wind Sensor Installation
Installation Instructions
Ag/MIS/ImGb-2797-03/21 Rev 1.0
P/N: 116839
Wind Sensor Installation
Installation Manual
Revision: N1.0 of 03.2021
Product Software: N/A
This manual for use and maintenance is an integral part of the apparatus together with the attached
technical documentation.
This document is destined for the user of the apparatus: it may not be reproduced in whole or in part,
committed to computer memory as a file or delivered to third parties without the prior authorization of the
assembler of the system.
Munters reserves the right to effect modifications to the apparatus in accordance with technical and legal
developments.
© Munters AB, 2021 2
Index
Chapter page
1
INTRODUCTION ------------------------------------------------------------------------------------------------------------------------------------------ 4
1.1 Disclaimer
1.2 Introduction
1.3 Notes
2
INSTALLATION ---------------------------------------------------------------------------------------------------------------------------------------------- 5
3
WIRING -------------------------------------------------------------------------------------------------------------------------------------------------------- 15
4
SPECIFICATIONS -------------------------------------------------------------------------------------------------------------------------------------- 16
5
WARRANTY ------------------------------------------------------------------------------------------------------------------------------------------------- 17
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
4
4
4
© Munters AB, 2021 3
1 Introduction
1.1 Disclaimer
Munters reserves the right to make alterations to specifications, quantities, dimensions etc. for production
or other reasons, subsequent to publication. The information contained herein has been prepared by
qualified experts within Munters. While we believe the information is accurate and complete, we make no
warranty or representation for any particular purposes. The information is offered in good faith and with
the understanding that any use of the units or accessories in breach of the directions and warnings in this
document is at the sole discretion and risk of the user.
1.2 Introduction
Congratulations on your excellent choice of purchasing a Wind Sensor!
In order to realize the full benefit from this product it is important that it is installed, commissioned and
operated correctly. Before installation or using the equipment, this manual should be studied carefully. It is
also recommended that it is kept safely for future reference. The manual is intended as a reference for
installation, commissioning and day-to-day operation of the equipment.
1.3 Notes
Date of release: March 2021
Munters cannot guarantee to inform users about the changes or to distribute new manuals to them.
NOTE All rights reserved. No part of this manual may be reproduced in any manner whatsoever without
the expressed written permission of Munters. The contents of this manual are subject to change
without notice.
© Munters AB, 2021 4
2 Installation
© Munters AB, 2021 5
© Munters AB, 2021 6
Loading...