USER MANUAL OF WIFI
IMPORTANT NOTE:
Read the manual carefully before connecting your
Smart kit(Wireless module). Make sure to save this
manual for future reference.
DECLARATION OF CONFORMITY
Hereby, we declare that this AC is in compliance
with the essential requirements and other
relevant provisions of Directive 2014/53/EU.
A copy of the full DoC is attached.
HU10533
SPECIFICATION
1
Model: OSK102
Standard: IEEE 802. 11b/g/n
Antenna Type: Printed PCB Antenna
Frequency : WLAN 2400~2483.5 MHz
Operation Temperature:0 C~45 C/32 F~113 F
Operation Humidity: 10%~85%
Power Input: DC 5V/300mA
Maximum Transmitted Power: 19.8dBm Max
2
PRECAUTIONS
Applicable system: iOS, Android.
Please keep you APP up to date with the latest version.
Due to special situation may be occurred, we explicitly
claims below: Not all of theAndroid and iOS system
are compatible with APP. We will not be responsible
for any issue as a result of the incompatibility.
W
ireless safety strategy
Smart kitonly support WPA-PSK/WPA2-PSK
encryption and none encryption .
WPA-PSK/WPA2-PSK encry ption is recommended.
Cautions
Due to different network situation, control process
may return time-out sometimes. If this situation
occurs, the display between board and App may not
be the same, please do not feel confused.
Smart Phone camera needs to be 5 million pixels or
above to make sure scan QR code well.
Due to different network situation, sometimes,
est time-out could happen, thus, it is necessary
requ
to do network configuration again.
The APP system is subject to update without prior notice for
product function improvement. The actual network configuration
process may be slightly different from the manual, the actual
process shall prevail.
Pl ea s e C he ck The Ser vic e We b si te Fo r M ore information.
3
DOWNLOAD AND INSTALL APP
CAUTION:ThefollowingQRCodeisonlyavailable
for downloading APP. It is totally different with
th e QR c od e pack ed wi th unit.
Android
Android Phone users: scan Android QR code or go to
google play, search ‘NetHome Plus” app and download it.
iOS users: scan iOS QR code or go to APP Store,
search ‘NetHome Plus” app and download it.
iOS
4
USER REGISTRATION
Please ensure your mobile device is connected to
Wireless router. Also, the Wireless router has already
connected to Internet before doing user registration and
VI5
network configuration.
It is better to log in your email box and activ e yo ur
registration account by clicking link in case you forget
the password. You can log in with the third party accounts.
0
Fo
rgot password?
1
Click "Login "
Crea Acc
2
Enter your email address
and password, and then
click " "Registration
NETWORK CONFIGURATION
5
Cautions
It is necessary to forget any other around network and
make sure the Android or iOS device just connect to
the Wireless network you want to configure.
Make sure the Android or iOS device Wireless function
works well and can be connected back to your original
Wireless network automatically.
Kindly reminder:
User must finish all the steps in 8 minutes after powering on
AC, otherwise you need to power on it again.
Using Android device to do network configuration
1
Make sure your mobile device has already been
connect to the Wireless network which you want to use.
Also, you need to forget other irrelevant Wireless
network in case it influences your configuration process.
2
Activate the AP mode (Read the WIRELESS MODE IN
OWNER'S MANUAL for detailed operations.).
5
Press “ + Add Device ”
6
Select the appliance you
are setting up
7
Follow the above steps to enter “AP” mode.
Align the QRco de withinthe frameto scan
Choose the “ Scan the
8
Choose the network
configuration method.
9
QR code ” method.
8:08 AM 50%
QR Code
Or choose the “Manual
9
Setup” method.
10
Please enter password
11
Network configuration is
successful
12
Configuration Success,
you can see the device
on the list.
Using iOS device to do network configuration
1
Make sure your mobile device has already been
connect to the Wireless network which you want to use.
Also, you need to forget other irrelevant Wireless
network in case it influences your configuration process.
2
Activate the AP mode (Read the WIRELESS MODE IN
OWNER'S MANUAL for detailed operations.).
6
5
Press “ + Add Device ”
Select the appliance you
are setting up
7
Follow the above steps to enter “AP” mode.
8
Connect to the Wireless
network.
9
Please enter password
10
Network configuration is
successful
NOTE:
When finishing network configuration, APP will
display success cue words on the screen.
Due to different internet environment, it is possible
that the device status still display “offline” . If this
situation occurs, it is necessary to pull and refresh
the device list on the APP and make sure the device
status become “online” . Alternatively, user can
turn off the AC power and turn on it again, the device
status will become “online” after few minutes.
Configuration Success,
11
you can see the device
on the list.
HOW TO USE APP
6
Please ensure both your mobile device and air
conditioner are connected to the Internet before
using app to control the air conditioner via internet,
please follow the next steps:
6,0
082
cc
2
1
Click "Login "
Choose the air conditioner.
Make sure the Bucket is not removed and place it in
3
right position.
From left to the right, these button means Power, Fan,
Continuous, Auto Dehumidification, and Pump.
1. Power
Press to turn on/off humidifier.
2. Fan mode
Press Fan icon to activate high ,med(on some models),low fan
speed.
3. Continuous mode
Press Continuous icon to activate. Press again to deactivate.
4. Auto dehumidification mode(on some models)
Press auto dehumidification icon to activate.Press again to
deactivate.
5. Pump mode(on some models)
Press Pump icon to activate.Press again to deactivate.
6. Humidity control.
The range of humidity is 35%RH-85%RH. User can add humitidy
by clockwise adjusting the white pointer. Similarily, user can
minus humidity by anticlockwise adjusting the white pointer. The
yellow pointer means current indoor humidity.
NOTE:
Not all the function of the APP is available on air
conditioner. please check the user manual to find more
information.
7
SPECIAL FUNCTIONS
Including: Timer on, Timer off,
NOTE: If the air conditioner do not support the above
function, the function will be hided from the function
list.
Timer on/Timer off
Weekly, user can make an appointment to turn on or
off AC on specific time.
Share Device
The air conditioner can be controlled by multi-users
at the same time by Share Device function.
1
Click ""Share device
2
Let the others to scan the
displayed QR code.
3
Click ""Add Share Device
4
Add the shared device.
CAUTIONS:
CONTAINS FCC ID: 2ADQ OMD N A15
CONTAINS IC : 1257 5A- MD NA15
This device co mplies with Part 15 o f the FCC R ules and
In dustr y Can ada's lice nce- exemp t RSSs.
Oper at ion is sub jec t to the f ollowing two con di tion s:
(1) This d evi ce may not caus e int erferen ce; and
(2) This d evice must accept any interference, including
inte rf erence tha t may caus e und esire d op er at ion of
the de v ice .
Only operate the device in accordance with the instructions
supplied.
Changes or modifications to this unit not expressly
approved by the party responsible for compliance could
void the user's authority to operate the equipment.
This device complies with FCC radiation exposure limits
set forth for an uncontrolled environment. In order to avoid
the possibility of exceeding the FCC radio frequency
exposure limits, human proximity to the antenna shall not
be less than 20cm (8 inches) during normal operation.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment
and receiver.
--Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV
technician for help.
Company will not be liable for any issues
and problems caused by Internet, Wireless
Router and Smart Devices. Please contact
the original provider to get further help.
NOTE:
All the illustrations in the manual are for explanation
purpose only. Your unit may be slightly different.
The actual shape shall prevail.
www.mundoclima.com
C/ PROVENZA 392 P2
08025 BARCELONA
SPAIN
(+34) 93 446 27 80
Loading...