Munchkin High Speed Bottle Warmer Owner's Manual

High Speed Bottle Warmer

Chauffe-biberon ultra rapide

MUNCHKIN AND IT’S THE LITTLE THINGS ARE TRADEMARKS OF

MUNCHKIN, INC. 16689 SCHOENBORN ST., NORTH HILLS, CA 91343.

MUNCHKIN BABY CANADA LTD., 50 PRECIDIO CT., UNIT A, BRAMPTON, ON L6S 6E3. MADE IN CHINA

LE PRODUIT ET MODÈLE SONT DES MARQUES DE COMMERCE SOUS

MUNCHKIN BABY CANADA LTD., 50 PRECIDIO CT., UNIT A, BRAMPTON,

16689 SCHOENBORN ST., NORTH HILLS, CA 91343

ON L6S 6E3. FABRIQUÉ EN CHINE.

HOUSEHOLD USE ONLY

High Speed Bottle Warmer

Chauffe-biberon ultra rapide

CCD-0049-000 REV 2

IMPORTANT SAFEGUARDS

WARNING: STRANGULATION HAZARD!

KEEP OUT OF REACH OF CHILDREN. DO NOT USE WITH EXTENTION CORDS. When using electrical appliances, basic safety precautions should always be followed including the following:

• Read all instructions carefully before use.

ENGLISH

• To protect against electric shock, do not immerse the appliance, cord or plug in water or any liquid. Clean unit with damp cloth only.

• For use by adults for intended purpose only. Any other use is inappropriate and dangerous. Keep out of the reach of small children.

• If there is any visible damage to the appliance, disconnect immediately and do not use. The appliance does not contain any user serviceable parts – repair should be done by qualied personnel. Do not dismantle.

• For household use only. Do not use outdoors.

• Appliance should be placed on a at and stable area away from hot surfaces. Do not let cord hang over edge of table or counter, or touch a hot surface.

• Do not move appliance when in use or if it contains hot water.

• Warming Chamber may become hot. Do not touch hot surfaces. Use handle or knobs.

• Pour out excess water and unplug appliance when not in use or before cleaning or storing.

• Ensure the contents are at a safe temperature before feeding.

• Use plastic bottles approved for boiling or glass thermo-resistant bottles / containers with this appliance.

• Unplug from outlet when not in use and before cleaning. Allow to cool before placing or removing basket and before cleaning.

• Do not operate any appliance with a damaged cord or plug after the appliance malfunctions or has been damaged in any manner. Return appliance to Munchkin, Inc. for examination, repair, or adjustment.

• The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.

• Do not place on or near a hot gas or electric burner, or in a heated oven.

• To disconnect, always make sure unit is “off” before removing plug from wall outlet.

• Do not use appliance for other than intended use.

• Before serving, unplug cord from wall outlet. Do not leave cord within child’s reach.

• Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.

•

Close supervision is necessary when any appliance is used by or near children.

• ON Button

• Measuring Cup Holder

• Warming Chamber

• Indicator Light

• Measuring Cup• Adapter Ring • Lift-Out Basket

SAVE THESE INSTRUCTIONS

CCD-0049-000 REV 2

INSTRUCTIONS FOR USE

• Place unit on a at surface away from the reach of children.

• Preheating of the appliance is not necessary.

• The appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to t into a polarized outlet only one way. If the plug does not t fully into the outlet, reverse the plug. If it still does not t, contact a qualied electrician. Do not attempt to modify the plug in any way. a. A short power supply cord is provided to reduce the risk of becoming entangled in or tripping over a longer cord. b. Longer detachable power-supply cords or extension cords are

Bottle / Jar Style and Fill Line Volume of food (before warming)

4oz. Standard Bottle Room Temperature* B 4oz. Standard Bottle Chilled / Refrigerated** E 4oz. Wide Bottle Room Temperature 4oz. Wide Bottle Chilled / Refrigerated 5oz. Wide Bottle Room Temperature A 5oz. Wide Bottle Chilled / Refrigerated 8oz. Standard Bottle Room Temperature B 8oz. Standard Bottle Chilled / Refrigerated E 9oz. Wide Bottle Room Temperature D 9oz. Wide Bottle Chilled / Refrigerated A + F

2.5oz. Food Jar Room Temperature D 4oz. Food Jar Room Temperature D 6oz. Food Jar Room Temperature D

Food Temperature

available and may be used if care is exercised in their use. c. If a longer detachable power-supply cord or extension cord is used,

*Room Temperature = 70°F / 21°C **Chilled / Refrigerated = 40°F / 5°C

1. the marked electrical rating of the cord set or extension cord should be at least as great as the electrical rating of the appliance, and

2. the cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children

or tripped over unintentionally.

To Warm Bottles or Baby Food:

To warm your baby’s bottle or food, please follow the instructions in the chart provided.

Note: These instructions are to be used as a guide only. Please note that there are many variables, such as size of the bottle and starting temperature of the food, which can impact the speed as well as the ﬁnal temperature at which this unit warms the bottle or jar. Adjustments to the instructions below may be necessary. Always test the temperature of food before feeding baby.

• When ready to begin, insert plug into wall outlet.

• Remove Measuring Cup from its holder and ll it with water to the appropriate ll line, according to the chart.

4 5

• Pour the pre-measured amount of water from Measuring Cup directly into Warming Chamber. Do not overll. If too much water is used, the

bottle or jar may be heated for too long a period and reach too high a temperature. Body temperature (98.6°F / 37°C) is ideal as a maximum warming level. Overlling may also cause damage to the unit.

• Always place Lift-Out Basket inside Warming Chamber before positioning your bottle or jar. Never place bottle or jar in Warming Chamber without using the Lift-Out Basket. Bottle / jar could be damaged or overheated.

• Place bottle or jar into warmer.

• Place Adapter Ring on top of the Lift-out-Basket. If the Adapter Ring does not t loosely around the bottle, do not use.

• Press the “ON” button. The Indicator Light will illuminate. This indicates that the warming cycle has started.

• The heater and light will shut off to indicate that the cycle has been completed. Remove the bottle / jar at once so that it will not continue heating.

- If bottle / jar is not warm enough, use slightly more water next time.

- If bottle / jar is too warm, use slightly less water.

• Allow at least 5 minutes for the unit to cool before next use.

CCD-0049-000 REV 2

+ 7 hidden pages