Munchkin Door Knob Covers Owner's Manual

Door Knob Cover Installation Instructions:

To install:

To Use: To open door, grab door knob through holes in Door Knob Cover and turn door knob.
To Clean: Wipe with a clean damp cloth.
CAUTION: This product is only a deterrant. Total access is not prevented and should not

be a substitute for adult supervision. Discontinue use when child becomes old enough to
defeat it. Discard all packaging components before use.

To remove:

1a. Line up tabs
and slots

1b. Pivot two halves together
over the door knob.

1. Assemble halves around door knob by
aligning front tabs and making sure all
locking channels are aligned and
securely fastened.

3. When assembled, make sure tabs are
aligned properly and fully inserted on both
sides. Door Knob Cover should spin freely.

2. Make sure button is aligned below the
locking ring on both sides while aligning
all the other slots and tabs.

1. Separate halves by pressing top and
bottom unlock buttons.

PRODUCT AND DESIGN ARE TM & ©2011 MUNCHKIN, INC. MUNCHKIN AND IT’S THE LITTLE THINGS ARE
TRADEMARKS OR REGISTERED TRADEMARKS OF MUNCHKIN, INC. 16689 SCHOENBORN ST., NORTH
HILLS, CA 91343. MUNCHKIN BABY CANADA LTD., 50 PRECIDIO CT., BRAMPTON, UNIT A, ON L6S 6E3.
MADE IN CHINA/FABRIQUÉ EN CHINE.

2. Pull apart two halves of Door Knob Cover.

800.344.BABY (2229)
www.munchkin.com

CCD-0051-000 REV 1CCD-0051-000 REV 1