Multitech MTA128ST, MultiModemISDN MTA128ST-USB Quick Start Manual

MTA128ST-USB
External ISDN Terminal Adapter
Quick Start Guide
Copyright and Technical Support
Quick Start Guide Product: MTA128ST-USB External ISDN Terminal Adapter PN S000340A Rev A
Copyright © 2004 by Multi-Tech Systems, Inc.
This publication may not be reproduced, in whole or in part, without prior expressed written permission from Multi-Tech Systems, Inc. All rights reserved. Multi-Tech Systems, Inc. makes no representations or warranty with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. Furthermore, Multi-Tech Systems, Inc. reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of Multi-Tech Systems, Inc. to notify any person or organization of such revisions or changes.
Record of Revision
Revision Date Description
A 04/15/04 Initial release for CD publication.
Patents
This device covered by one or more of the following patents: 6,031,867; 6,012,113; 6,009,082; 5,905,794; 5,864,560; 5,815,567; 5,815,503; 5,812,534; 5,809,068; 5,790,532; 5,764,628; 5,764,627; 5,754,589; 5,724,356; 5,673,268; 5,673,257; 5,644,594; 5,628,030; 5,619,508; 5,617,423; 5,600,649; 5,592,586; 5,577,041; 5,574,725; 5,559,793; 5,546,448; 5,546,395; 5,535,204; 5,500,859; 5,471,470; 5,463,616; 5,453,986; 5,452,289; 5,450,425; D353,598; 5,355,365; 5,309,562; 5,301,274 Other Patents Pending
Trademark
Trademarks of Multi-Tech Systems, Inc. are as follows: Multi-Tech logo and MultiModem.
World Headquarters
Multi-Tech Systems, Inc. 2205 Woodale Drive Mounds View, Minnesota 55112 (763) 785-3500 or (800) 328-9717 FAX (763) 785-9874
Technical Support Country By Email By Phone
France: support@MultiTech.fr (33) 1-64 61 09 81 India: support@MultiTechindia.com 91 (124) 6340778 U.K.: support@MultiTech.co.uk (44) 118 959 7774 U.S. and Canada: support@MultiTech.com (800) 972-2439 Rest of the World: support@MultiTech.com (763) 717-5863 Internet Address: http://www.MultiTech.com
Multi-Tech Systems, Inc. MTA128ST-USB External ISDN Terminal Adapter PN S000340 2
Table of Contents
Contents
Chapter 1 – Introduction and Description ..........................................................................................4
Introduction....................................................................................................................................................................................4
Product Description......................................................................................................................................................................4
Universal Serial Bus (USB).........................................................................................................................................................4
Safety Warning Telecom/ISDN-ST............................................................................................................................................5
Unpacking your MTA128ST-USB..............................................................................................................................................5
Assembling the MTA128ST-USB..............................................................................................................................................6
Connecting the MTA128ST-USB...............................................................................................................................................6
Connecting to Your Computer....................................................................................................................................................6
Connecting to Power....................................................................................................................................................................7
Connecting to Your ISDN Network Terminator.......................................................................................................................7
Connecting to Analog Equipment..............................................................................................................................................7
Chapter 2 – Software Installation .......................................................................................................8
Software Installation.....................................................................................................................................................................8
Installing in Windows 2000/XP...............................................................................................................................................8
Installation in Windows 98/ME.............................................................................................................................................16
Changing the Modem Descriptor (Windows 98)..................................................................................................................17
Removing Your Old Device from Windows /2000/XP.........................................................................................................20
Chapter 3 – Configuration................................................................................................................ 21
Configuration..............................................................................................................................................................................21
Network Configuration..............................................................................................................................................................21
Network Switch Type............................................................................................................................................................21
Call Control Configuration........................................................................................................................................................22
ISDN MTA128ST-USB Configuration Utility..........................................................................................................................23
To Install in Windows 98/2000/XP.......................................................................................................................................24
To Use the ISDN MTA128ST-USB Configuration Utility.....................................................................................................24
AT Commands...........................................................................................................................................................................25
Using AT Commands to Configure the MTA128ST-USB...................................................................................................25
Multi-Tech Systems, Inc. MTA128ST-USB External ISDN Terminal Adapter PN S000340 3
Chapter 1 – Introduction and Description
CHAPTER 1 – INTRODUCTION AND DESCRIPTION
Introduction
Welcome to the world of data communications. You have acquired one of the finest ISDN terminal adapters (TA) available today from one of America’s oldest and most respected modem manufacturers: Multi-Tech Systems, Inc. This Quick Start Guide will help you unpack, install, configure, and use your MTA128ST-USB.
Product Description
The MTA128ST-USB is a desktop terminal adapter with an ST port used for connection to an ISDN network, a USB port for connection to a PC or laptop, and an analog port to connect it to a telephone, modem, or fax machine. It ships with a software configuration utility for Windows 98/2000/XP. In addition, the MTA128ST-USB accepts AT commands that enable it to use the same communications software as an analog modem.
MTA128ST-USB
The MTA128ST-USB is compatible with the popular EuroISDN switch protocol, it communicates using ISDN BRI (2B+D) service, which provides up to 128 Kbps data and voice communications. The device automatically detects whether an incoming call is voice or data and handles it appropriately.
Universal Serial Bus (USB)
Universal Serial Bus (USB), defined by a consortium of industry leaders, permits connection of multiple low-speed and medium speed computer peripheral devices such as telephones, modems, printers, keyboards, mice, and scanners; all from a single personal computer port. The specification, based on open architecture is quickly becoming a standard feature in new desktop and notebook computers.
For more details, refer to the USB Public Web Board on the World Wide Web at:
http://www.usb.org/
Multi-Tech Systems, Inc. MTA128ST-USB External ISDN Terminal Adapter PN S000340 4
Chapter 1 – Introduction and Description
Safety Warning Telecom/ISDN-ST
1. Never install telephone wiring during a lighting storm.
2. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.
3. This product is to be used with CE approved/marked computers.
4. Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.
5. Use caution when installing or modifying telepho ne lines.
6. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electrical shock from lightning.
7. Do not use the telephone to report a gas leak in the vicinity of the leak.
8. To reduce the risk of fire, use only No. 26 AWG or larger Telecommunication line cord.
9. If S/T - interface ISDN network connection cable is used, the ISDN phone cord should be connected between the ISDN network connection cable and a NT1 device.
Unpacking your MTA128ST-USB
Remove all items from the box.
Unpacking
Multi-Tech Systems, Inc. MTA128ST-USB External ISDN Terminal Adapter PN S000340 5
Chapter 1 – Introduction and Description
Assembling the MTA128ST-USB
The only assembly required is to mount the feet on the bottom of the unit. Peel the four self­adhesive plastic feet off the backing strip and press them into the recesses on the bottom.
Connecting the MTA128ST-USB
Place the MTA128ST-USB terminal adapter in a convenient location. In a typical configuration, you will need to connect your MTA128ST-USB to your computer’s USB port, to its own power supply, to the ISDN network terminator, and to any optional analog equipment you are using (e.g., a telephone).
MTA128ST-USB Connection
Connecting to Your Computer
1. Plug the 4-pin flat end (Type A) into a USB port connector on your computer or laptop.
Note: Do NOT plug the “D-shaped” end (Type B) of the USB cable into the USB
connector on the back panel of the MTA128ST-USB at this time. You will be directed to make the connection during the software driver installation process.
Multi-Tech Systems, Inc. MTA128ST-USB External ISDN Terminal Adapter PN S000340 6
Chapter 1 – Introduction and Description
Connecting to Power
1. Plug the power supply into the unit’s POWER connector.
2. Plug the power supply into a live AC outlet.
3. Turn on the unit by sliding the power switch to ON.
4. Verify operation by observing the LED indicators on the front panel. The LEDs will initially flash in a self-test pattern. Then the LS LED will remain on. (See LED descriptions in the on-line User Guide.) If the terminal adapter does not appear to be working, see Chapter 5 in the on-line User Guide for troubleshooting help.
Caution: Only use the power supply shipped with your MTA128ST-USB; any other power
supply could damage the unit and void its warranty.
Connecting to Your ISDN Network Terminator
1. If you need a longer line cord than the RJ-45 line cord provided with your MTA128ST­USB, select a cord that is wired straight through (pin 1 to pin 1; pin 2 to pin 2, etc.) with at least the middle four pins connected (pins 2, 3, 4, and 5).
2. Plug one end of the provided RJ-45 S/T line cord into the ISDN jack on the MTA128ST­USB and the other end into the S/T jack on your network terminator.
Note: The AUX jack and ISDN jack are not interchangeable.
Connecting to Analog Equipment
You can connect an analog device such as an analog telephone, modem, or fax machine to the unit. Simply plug the device’s modular RJ-11 telephone cord into the RJ-11 AUX connector.
Note: The AUX jack and the ISDN jack on the unit are not interchangeable.
Multi-Tech Systems, Inc. MTA128ST-USB External ISDN Terminal Adapter PN S000340 7
Chapter 2 – Software Installation
CHAPTER 2 – SOFTWARE I NSTALLATION
Software Installation
MTA128ST-USB driver software is installed in Windows 2000/XP and 98/ME operating environments.
Installing in Windows 2000/XP
1. Power up your Windows 2000/XP system.
2. Turn on your MTA128S T-USB. The LS (Power) LED will light.
3. Plug the “D-shaped” end (Type B) of your USB cable into the USB connector on the back of the unit
4. Windows will detect that the new modem is present and launch the Found New Hardware Wizard.
Place the Installation CD provided with your modem into your CD-ROM drive and click Next > to proceed with the installation.
Multi-Tech Systems, Inc. MTA128ST-USB External ISDN Terminal Adapter PN S000340 8
Loading...
+ 17 hidden pages